Dear all,
This is my first post, and thus I want to thank you all for the enormous effort already spend into the software and forum.
I have built-up my first HTPC recently and struggling with some configuration / behaviour of MediaPortal. You can find my current configuration in my profile. I have two issues:
(1) When I scan for TV channels, I can find only seven channels.
(2) When I try to tune any TV channel, I get a System.AccessViolationException .
Situation:
(1) I have two Technisat Skystar 2 HD DVB-S tuners and an Astro 85cm dish with Quad-LNB and Spaun Matrix. In the Server Configuration I checked two satellites for both tuners. Thus, both tuners have the same configuration. Sat 1 has default settings except that satellite is configured to Astra 19°2 E . Sat 2 has default settings except that satellite is configured to Astra HD (or the like, forgot exact name). Yet, when scanning for channels, I got 7 misses (no signal), the eight one is a hit with 7 channels (e.g. ProSieben Switzerland and Austria; several "unknown") and all the remaining ones are just updates. My signal quality appears to be 100% while signal strength is approx. 75%.
(2) When starting the MediaPortal and select "MyTV" it takes approx. 5 seconds and then I get an error message within MediaPortal that timeshift could not be started. Checking the logs, I found the aforementioned System.AccessViolationException . I checked the Windows XP setting for the XD-bit and it is configured to apply to essential Windows services only.
Please find the logs below.
Thank you for any assistance on my two issues.
BTW: as I am new to MediaPortal, please try to avoid abbreviations as good as possible. E.g. I have read many times about SVN but do not know where to get it. I know SVN as source code repository, but then I would have to compile, right? I do not have a compiler.
This is my first post, and thus I want to thank you all for the enormous effort already spend into the software and forum.
I have built-up my first HTPC recently and struggling with some configuration / behaviour of MediaPortal. You can find my current configuration in my profile. I have two issues:
(1) When I scan for TV channels, I can find only seven channels.
(2) When I try to tune any TV channel, I get a System.AccessViolationException .
Situation:
(1) I have two Technisat Skystar 2 HD DVB-S tuners and an Astro 85cm dish with Quad-LNB and Spaun Matrix. In the Server Configuration I checked two satellites for both tuners. Thus, both tuners have the same configuration. Sat 1 has default settings except that satellite is configured to Astra 19°2 E . Sat 2 has default settings except that satellite is configured to Astra HD (or the like, forgot exact name). Yet, when scanning for channels, I got 7 misses (no signal), the eight one is a hit with 7 channels (e.g. ProSieben Switzerland and Austria; several "unknown") and all the remaining ones are just updates. My signal quality appears to be 100% while signal strength is approx. 75%.
(2) When starting the MediaPortal and select "MyTV" it takes approx. 5 seconds and then I get an error message within MediaPortal that timeshift could not be started. Checking the logs, I found the aforementioned System.AccessViolationException . I checked the Windows XP setting for the XD-bit and it is configured to apply to essential Windows services only.
Please find the logs below.
Thank you for any assistance on my two issues.
BTW: as I am new to MediaPortal, please try to avoid abbreviations as good as possible. E.g. I have read many times about SVN but do not know where to get it. I know SVN as source code repository, but then I would have to compile, right? I do not have a compiler.