Technotrend DVB-S no LNB switch (1 Viewer)

[Erbsenkopp]

Area: Media Portal Program
MP Version: MP Release 0.2.0.0 with stable update 0.2.0.3
Skin: MCE
Windows Version: MS Windows XP Professional with all Updates / Servicepacks and xpMCE
CPU Type: AMD Athlon64 3200+
Memory: 2x 512MB DDRRAM MDT
Motherboard Chipset: Asus A8N-VM CSM S 939 GForce6150/MCP430
Video Card: Asus Nvidia GeForce 6200 128MB
Video Card Driver: nv4_disp 6.14.10.8198 - nVIDIA Detonator 81.98
Video Card Resolution: 1024 x 768 32 Bit
Video Render Type: VMR9
Video Codec Type & Version: MPV Decoder
Audio Codec Type & Version: MPA Decoder
TV Card: Technotrend DVB-S 1500 CI Budget
TV Card Driver: 4.4.10.15
Optional Log: DVBGraph: unknown DiSEqC config 1; using defaults: LNB:-1 kHz diseqc:-1 lnbKind:0

Hallo,

first of all - sorry about my english

I use my TV Card with a 4/1 DiseqC switch.

LNB 1 = Astra 1A - 1D 19,2
LNB 2 = Hotbird 13
LNB 3 = Astra 3A 23,5

If i start scanning only LNB 1 (Astra 19,2) will be found.

With xpMCE no Problems - all Satellites found.

I test too with multiple MP and / or svn versions but it makes no different.

-----------------------------------------------------------------
http://pastebin.team-mediaportal.com/10288

 

[scoop]

Hi,

Please configure LNB / DiSEqC settings first before attempting autotune. Unfortunately (because of the way setup is designed) altered settings aren't stored until setup is closed. So:

- start setup
- configure LNB / DiSEqC
- close setup (by pressing OK)
- restart setup
- perform autotuning

If it still doesn't work then, please post the logfile of that @ http://pastebin.team-mediaportal.com and report back here.

Kind regards,
Michel

 

[Erbsenkopp]

Hallo,

thank you for your answer, but - i allways do it so like you wrote.

So, problem still there

 

[ramonmendoza]

I have the same Problem

lnb 1: Hotbird OK
lnb 2: Astra Ko

Card: Technotrend Budget s-1400

 

[scoop]

Hi,

Well, post a logfile of that then. As I said the logfile you posted this time shows you didn't. So, a logfile with you following the above procedure should show something different.

So, please post a logfile of that or we can't do anything for you.

Michel

 

[Erbsenkopp]

Hallo,

your right, the logfile should log different but it is after i do i so like you wrote.

I think, thats the problem.

 

[Erbsenkopp]

So, i have done another two tests

1.

LNB 1 - Simple A - Astra 19.2 = OK
LNB 2 - Simple B - Hotbird 13 = not OK

Database Card.XML = http://pastebin.team-mediaportal.com/10291
Logfile = http://pastebin.team-mediaportal.com/10292

2.

LNB 1 - Level 1 A/A - Astra 19.2 = OK
LNB 2 - Level 1 B/A - Hotbird 13 = not OK
LNB 3 - Level 1 A/B - Astra 23.5 = not OK

Database Card.XML = http://pastebin.team-mediaportal.com/10293
Logfile = http://pastebin.team-mediaportal.com/10294

I also look the outgoing signal with a diseqC and signal measuring instrument and there is allways ToneBurst = A, Pos+Opt = 1, SW 1-4 = 1

 

[scoop]

Hi,

Please try with MediaPortal-svn--08-06-2006--21-55-Rev9780.exe or later. If it still doesn't work, please post the logfile of the autotune process (Configuration.log) again.

Thanks for the detailed report by the way.

Kind regards,
Michel

 

[Erbsenkopp]

Hi scoop,

so, i start the next test.

I use the svn snapshot 08-07-2006-01-02-Rev9784.

The logfile now looks different but again only LNB 1 will be scannt.

The outgoing signal also has no diseqc commands.

Logfile: http://pastebin.team-mediaportal.com/10312

Thank you for your help
Erbsenkopp

 

[scoop]

Hi,

Ok, now at least the TechnoTrend implementation gets the right parameters to send the DiSEqC message. Unfortunately now things seem to go wrong in the TechnoTrend specific support, which is still Work-In-Progress by the way.

The dev currently working on TechnoTrend support is draktheas. See this forum thread: https://forum.team-mediaportal.com/viewtopic.php?t=11695 . Since he's working on the TT Premium support, I am not sure the implementation is supposed to work with the budget series as well. Try getting his attention concerning this matter in that forum thread and hopefully he can give you an answer.

Kind regards,
Michel