Tuning parameters Ziggo 9003 changed again? (1 Viewer)

[klara31]

MediaPortal Version: RC2
MediaPortal Skin: StreamedMP
Windows Version: Windows 7 32bit
CPU Type: Intel Core2Duo E7300
HDD: OCZ SSD (30G, boot) + WD Caviar GP 750 GB
Memory: Corsair TWIN2X2048-6400C5DHX 2 GB
Motherboard: ASUS P5N7A-VM
Video Card: Sapphire Radeon HD 5450 1024 MB
Video Card Driver: Catalyst 10.7
Sound Card: onboard
Sound Card AC3: HDMI out
Sound Card Driver: onboard
1. TV Card: Terratec Cinergy C PCI HD
1. TV Card Type: DVB-C
1. TV Card Driver: 1.01.0.601
2. TV Card: Terratec Cinergy C PCI HD
2. TV Card Type: DVB-C
2. TV Card Driver: 1.01.0.601
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: PDVD11
MPEG2 Audio Codec: LAV
h.264 Video Codec: PDVD11
Satelite/CableTV Provider:
HTPC Case: Chieftec HE-02B-OP
Cooling:
Power Supply: Be Quiet! Straight Power E6 400 Watt
Remote: Logitech Harmony
TV: Philips 32PFL9613D/10
TV - HTPC Connection: HDMI

After the 'big change' of tuning parameters in September, it looks like Ziggo has changed the tuning parameters again for 9003. On some channels I get 'no signal', also when scanning.

Is Ziggo doing maintenance or do more users (in the 9003 region) have the same problems?

 

[joostzilla]

I have the same problem in region 1111 (Brabant). It seems to only affect SD channels. (discovery, Animal planet)

 

[Lbr_Lion]

I checked the Ziggo Network Information Table and there are changes done for some regions. (1111, 7800, 7900, 8600, 9001, 9003 and 9700)

The updated parameters can be downloaded from the following thread:

https://forum.team-mediaportal.com/...ed-tuningparameters-ziggo-netherlands-101120/

(Unzip the file in: x:\ProgramData\Team MediaPortal\MediaPortal TV Server\TuningParameters\dvbc\ and rescan the channels with the option 'Enable channel movement detection' to avoid duplicate channels)

 

[klara31]

I checked the Ziggo Network Information Table and there are changes done for some regions. (1111, 7800, 7900, 8600, 9001, 9003 and 9700)

The updated parameters can be downloaded from the following thread:

https://forum.team-mediaportal.com/...ed-tuningparameters-ziggo-netherlands-101120/

(Unzip the file in: x:\ProgramData\Team MediaPortal\MediaPortal TV Server\TuningParameters\dvbc\ and rescan the channels with the option 'Enable channel movement detection' to avoid duplicate channels)

These new tuning parameters do work OK for 9003.