SVN-snapshot from: All RC4
Windows Version: XP SP2
CPU Type: AMD Athlon 64 3000
Memory: 512MB
Motherboard: Asus K8n
Motherboard Chipset: nvidia nforce3 250
Motherboard Bios: AMI
Video Card: Asus Radeon 9250
Video Card Driver: Catalyst 8.241.0.0
Sound Card: Realtek ALC 850
Sound Card AC3:
Sound Card Driver:
1. TV Card: FloppyDTV Cable, priority 2
1. TV Card Type: Digital
1. TV Card Driver: 4.2.0 BDA, firmware 20-mar-2006 Beta
2. TV Card: Hauppauge WinTV PVR 150 PCI, priority 1
2. TV Card Type: Analog
2. TV Card Driver: 2.0.43.24103
Video Codec: Dscaler
Audio Codec: Intervideo Windvd
Satelite/CableTV Provider: Multikabel
HTPC Case: Silverstone LC10-M Lascala
Power Supply: Tagan
Remote: Hauppaug silver 45 button
TV:
TV - HTPC Connection: VGA to RGB Scart
Error description:
I have a configuration where most TV channels are available on both tuners. When I select a TV channel that's available on the analog Hauppauge card only (sorry, for testing purposes I tried "Tel Sell" ), and I try to switch back to a channel which is available on both tuners ("Nederland 2" in this case), MP uses the last used tuner.
I would expect MP to change channels to the DVB version of Nederland2, because the FloppyDTV has a higher priority than the Hauppauge tuner.
In short:
I guess MP should check which TV card has highest priority for this channel
Steps to reproduce:
1) Enter MyTV
2) select a channel, any channel will do
3) select a channel which is available only on the card with the lowest priority
4) switch back to any channel which is available on both tuners
5) MP will use last used tuner.
Windows Version: XP SP2
CPU Type: AMD Athlon 64 3000
Memory: 512MB
Motherboard: Asus K8n
Motherboard Chipset: nvidia nforce3 250
Motherboard Bios: AMI
Video Card: Asus Radeon 9250
Video Card Driver: Catalyst 8.241.0.0
Sound Card: Realtek ALC 850
Sound Card AC3:
Sound Card Driver:
1. TV Card: FloppyDTV Cable, priority 2
1. TV Card Type: Digital
1. TV Card Driver: 4.2.0 BDA, firmware 20-mar-2006 Beta
2. TV Card: Hauppauge WinTV PVR 150 PCI, priority 1
2. TV Card Type: Analog
2. TV Card Driver: 2.0.43.24103
Video Codec: Dscaler
Audio Codec: Intervideo Windvd
Satelite/CableTV Provider: Multikabel
HTPC Case: Silverstone LC10-M Lascala
Power Supply: Tagan
Remote: Hauppaug silver 45 button
TV:
TV - HTPC Connection: VGA to RGB Scart
Error description:
I have a configuration where most TV channels are available on both tuners. When I select a TV channel that's available on the analog Hauppauge card only (sorry, for testing purposes I tried "Tel Sell" ), and I try to switch back to a channel which is available on both tuners ("Nederland 2" in this case), MP uses the last used tuner.
I would expect MP to change channels to the DVB version of Nederland2, because the FloppyDTV has a higher priority than the Hauppauge tuner.
In short:
I guess MP should check which TV card has highest priority for this channel
Steps to reproduce:
1) Enter MyTV
2) select a channel, any channel will do
3) select a channel which is available only on the card with the lowest priority
4) switch back to any channel which is available on both tuners
5) MP will use last used tuner.