TV DVB T2 in Thailand (1 Viewer)

barryw52

New Member
January 18, 2009
4
1
We now have Digital TV in Thailand using the DVBT2 standard same as UK. I manged to scan the Channels by setting to the UK all regions and ticking the Channel moment detection box plus the used advanced tuning options box as well. several Channels came up as encrypted but when I set there properties to Free TV all was ok .I am using a TBS 6281 Dual Tuner Card and all it now working very well. Be good if Thailand could now be added to the list of countries for the TV Server setup Channel start at 464Mhz (Chennel 21) - 858Mhz (Ch 69) and are 8Mhz wide channels.
 

mm1352000

Development Group
  • Team MediaPortal
  • September 1, 2008
    21,571
    8,218
    New Zealand New Zealand
    Country flag
    Hello and welcome barryw52! :)

    Thanks for the report. (y)
    Could you please submit tuning detail file(s) for Thailand here:
    https://forum.team-mediaportal.com/forums/submit-epg-grabbers-and-tuningdetails.296/

    Tuning parameters are in c:\ProgramData\Team MediaPortal\MediaPortal TV Server\TuningParameters\
    Windows hides ProgramData by default, so copy and paste the path into the address bar in Windows Explorer to get there.
    The DVB-T/T2 tuning parameters are in the "dvbt" subfolder.
    XML files can be opened, edited and saved in any text editor (notepad, wordpad etc.).

    If possible, please create one file per region/province/transmitter like we have done for the UK.

    Thanks in advance!
    mm
     

    barryw52

    New Member
    January 18, 2009
    4
    1
    Ok Thanks,I can see the XML files for each Country and region. Where is the file created by my tune search here located so I can see it parameters? I only have access in Bangkok so I have do a bit or research to see if I can see what there are doing for all the other Provinces here for the other files I suspect I only be able to give you Bangkok. There is not much technical info around about Service here I have worked most of it out myself by look at the Search on my TV with Built in Digital Tuner plus the Media portal Tuner Search. There not even any EPG information for the channels yet I can see a bit testing going on so still early day and service has been live for month now.


    Regards

    Barry
     

    mm1352000

    Development Group
  • Team MediaPortal
  • September 1, 2008
    21,571
    8,218
    New Zealand New Zealand
    Country flag
    Hello again Barry

    Where is the file created by my tune search here located so I can see it parameters?
    There is no such file. That's why I suggested to copy and edit one of the UK files.

    I suspect I only be able to give you Bangkok.
    That's okay. We appreciate any and all contributions. :)

    Best regards,
    mm
     

    barryw52

    New Member
    January 18, 2009
    4
    1
    The Thailand Tuning Parameters are working fine now in 1.10 did a complete re-install of Media portal 1.10 on one of my systems and retuned TV channel again from nothing all perfect first time.
    But with the EPG I have both English and Thai languages selected but the Thai comes out as funny English like characters where English is used in the EPG it shows up fine. I can see the the EPG is working correctly on my Digital TV but not on Media Portal TV server. I have the Thai language installed on the PC. What other steps do I need to take to get EPG in Thai working?
     

    mm1352000

    Development Group
  • Team MediaPortal
  • September 1, 2008
    21,571
    8,218
    New Zealand New Zealand
    Country flag
    What other steps do I need to take to get EPG in Thai working?
    It is possible that the broadcaster is not properly specifying the encoding of the EPG characters.

    Let's ask if our resident text encoding expert - @Vasilich - can help you. :)
     

    Vasilich

    Test Group
  • Team MediaPortal
  • August 30, 2009
    3,393
    1,170
    Germany, Mayence
    Russian Federation Russian Federation
    Country flag
    @mm1352000 do you remember there was one place in TVE3 you told it won't let character table codes over 0x05 to go through? thai should use byte 0x07, and for that we have proper implementing of it in DvbTextConverters.cs line #82. I will try to search that thread...
     

    mm1352000

    Development Group
  • Team MediaPortal
  • September 1, 2008
    21,571
    8,218
    New Zealand New Zealand
    Country flag
    Last edited:

    Vasilich

    Test Group
  • Team MediaPortal
  • August 30, 2009
    3,393
    1,170
    Germany, Mayence
    Russian Federation Russian Federation
    Country flag

    Vasilich

    Test Group
  • Team MediaPortal
  • August 30, 2009
    3,393
    1,170
    Germany, Mayence
    Russian Federation Russian Federation
    Country flag
    or we can fix that part in tve3 and give test version to barryw52. You said you have fixed it for TVE35. I don't remember where that code is used (TSwriter only or somewhere else), so not sure if it is also easy to test (as it is easy to replace one module, but reinstall TVServer is too much for the user, and too much work for us...)

    Sorry, can't react very fast as i am at work right now. And cannot compile anything here :(
     

    Users Who Are Viewing This Thread (Users: 0, Guests: 1)

    OP Similar threads Forum Replies Date
    R Suggestions for reliable PCIe DVB-S2 tuner MediaPortal 1 Talk 8
    Golf4 DVB-IP über Fritzbox - m3u-Senderliste Allgemeines Support- und Diskussionsforum 33
    M TV Server can't tune to some DVB-S multiplexes while other software can General 0
    C Telenet analog-to-digital switch -- manually finding and inputting DVB-C channels in Mediaportal2 General 0
    framug No color in TVGuide when XMLTV without DVB EPG MediaPortal 1 Talk 59
    T [solved] Any idea where Channel 107 (DVB-T2) BBC News HD (and others!) have gone??? Installation, configuration support 12
    framug [EPG] Some problems with DVB EPG Improvement Suggestions 49
    bta489 [solved] DVB-T2 Recordings: Sometimes no Audio after muxing with mkvmerge Tools and other software 2
    badboyxx TV card is listed as unknown in TV-server config General 4
    bribbon [Pending] Switzerland: DVB-T switch-off on 03 June 2019 Submit: EPG-Grabbers and tuningdetails 0
    bribbon [Pending] DVB-C Tuning Parameters: Switzerland.UPC Cablecom [NID 43020] v.7.xml Submit: EPG-Grabbers and tuningdetails 0
    J DVB-S2 card fails to tune? Subchannel count increasing Television (MyTV frontend and TV-Server) 3
    D Cannot get a fully populated UK Freesat EPG (DVB-S) General 14
    hanfmaster Dvb-s2 zu android ipad Einsteigerforum 0
    C DVB-C Empfänger Hauppauge Win TV dual wird in Media Portal nicht aktiviert TV / Streaming 1
    Terra [solved] MP TV Server cannot find any channels anymore, DVB viewer works Installation, configuration support 8
    Booner [Verkauf] Verkaufe Max S8 8 Tuner DVB-S2 Karte von Digital Devices neuwertig Marktplatz 2
    N [solved] How to record a series (UK Freeview dvb-t) General 10
    N What dvb-t/t2 dual or quad tuners work with media portal (in the UK)? Newcomers Forum 8
    E [solved] Vodafone Kabel dvb-c Braunschweig Tuning Liste (Stand 31.01.2019) TV / Streaming 0
    items [Verkauf] Hauppauge Dual TV Tuner USB DVB-C, DVB-C Marktplatz 0
    A Help! MP2 - DVB-T Not recognised (DRIVERS?) General 12
    porky996t DVB Sat card possibly failed General Support 1
    splatterpop My optimized dvb epg configuration for tv server MediaPortal 1 Talk 0
    N Tswriter Watch / Listen Media 51
    Similar threads

























    Top Bottom