Reply to thread

Message

<blockquote data-quote="Hildebrandt" data-source="post: 408874" data-attributes="member: 21207">MediaPortal Version: 1.0.1 TVSERVERWindows Version: XP SP3CPU Type: Athlon 64 X2 5050eeHDD: 80GB WD Scorpio Blue &amp; 2TB WD Green PowerMemory: 2 GB Kingston ValueRAMMotherboard: Jetway NC62KMotherboard Chipset: Geforce 8200Motherboard Bios: PhoenixVideo Card: Geforce 8200Video Card Driver: Sound Card: Integrated in MB / Realtek ALC888 1. TV Card: Hauppauge WinTV MiniStick SMS10001. TV Card Type: USB1. TV Card Driver: Video-Audio Codec: (Codecs supplied with Hauppauge Ministick - wintv7_cd_1.0c) + XVID 1.2.1Installation worked flawlessly - used already installed SQL, and connected to that when first entering tv-server configuration.In configuration i scan for channels, and the server finds the channels i expect, and they appear as they should (signal level at approx 50%, signal quality at approx 95%).Problem is: when entering manual control i cannot start timeshift (&quot;No video/audio detected&quot;). I can update EPG with no error msgs appearing.My client is installed with MP-Client 1.0.0 and configured to connect to the server.When opening the client i cannot watch tv - the client retrieves the EPG from the server without difficulty, but attempts to watch tv fails with error msg stating that &quot;No picture/sound detected&quot;.Even though the client must be connected to the server (it retrieves EPG from the server), the client doesn't appear in &quot;Streaming Server&quot; client list.My firewall is Sygate free edition - this does not block the server (as is apparent: EPG data is transmitted to client)Before installing server 1.0.1, server 1.0.0 was installed - same thing happened then.I'm confused - any help would be appreciated...</blockquote>

[QUOTE="Hildebrandt, post: 408874, member: 21207"] [b]MediaPortal Version[/b]: 1.0.1 TVSERVER [b]Windows Version[/b]: XP SP3 [b]CPU Type[/b]: Athlon 64 X2 5050ee [b]HDD[/b]: 80GB WD Scorpio Blue & 2TB WD Green Power [b]Memory[/b]: 2 GB Kingston ValueRAM [b]Motherboard[/b]: Jetway NC62K [b]Motherboard Chipset[/b]: Geforce 8200 [b]Motherboard Bios[/b]: Phoenix [b]Video Card[/b]: Geforce 8200 [b]Video Card Driver[/b]: [b]Sound Card[/b]: Integrated in MB / Realtek ALC888 [b]1. TV Card[/b]: Hauppauge WinTV MiniStick SMS1000 [b]1. TV Card Type[/b]: USB [b]1. TV Card Driver[/b]: [b]Video-Audio Codec[/b]: (Codecs supplied with Hauppauge Ministick - wintv7_cd_1.0c) + XVID 1.2.1 Installation worked flawlessly - used already installed SQL, and connected to that when first entering tv-server configuration. In configuration i scan for channels, and the server finds the channels i expect, and they appear as they should (signal level at approx 50%, signal quality at approx 95%). Problem is: when entering manual control i cannot start timeshift ("No video/audio detected"). I can update EPG with no error msgs appearing. My client is installed with MP-Client 1.0.0 and configured to connect to the server. When opening the client i cannot watch tv - the client retrieves the EPG from the server without difficulty, but attempts to watch tv fails with error msg stating that "No picture/sound detected". Even though the client must be connected to the server (it retrieves EPG from the server), the client doesn't appear in "Streaming Server" client list. My firewall is Sygate free edition - this does not block the server (as is apparent: EPG data is transmitted to client) Before installing server 1.0.1, server 1.0.0 was installed - same thing happened then. I'm confused - any help would be appreciated... [/QUOTE]

Verification