TVEngine3 Snapshot: 02-05-2008 15-34h Revision 17305 (2 Viewers)

[hugo13]

Scanning and looking of the DVB-S2 with 8PSK channels does not work.
On the 4 transponders on Astra 19.2E only the channel with DVB-S2 and QPSK is working.
Checked with boths cards, Twinhan and Technotrend.

Viewing and zapping are better then the last version,but not very stable. Many blocking and errors are shown. Sometimes the system is hanging for some minutes and then the key press are executed and sometimes is crshing total, only a restart helps. Zapping are not faster then before SD->HD 5-6s, SD->SD 3-4s, HD->HD not tastable because only one free HD channel is working.

Crashes can be easy reproducable. Press the mice into the black screen before the error message is coming up.

Hugo

 

[momo]

multiseat from TT card working again!

The problems I had reported are solved, can view on all clients again.
Thanks!!!

 

[The Doctor]

Ok, with this version all my clients can show TV again. It's still not possible to tune a different channnel on the same transponder. The requested stream is setup to the client and then the other 1st stream stops at the singleseat mp.

Zapping is ok if you use the mini-epg or the guide, zapping through program up and down results mostly but not always in a still picture. Zapping between coded channels is ok but zapping from coded to fta fails most of the time.

HD channels are fine.

Well I hope this helps further development. I can't test too much because we use this system as our primary tv-source. Well and the wife wants to watch ...... House, Midsummer Murders , Murder investigated ...... and so on , and so on.

 

[vuego]

This one can't find HD channels when scanning. Tried SVN 17267 and it had no problems scanning the same channels.

2008-02-05 22:06:05.643925 [22]: dvbc: Tune:DVBC:tv:  Freq:434000 ONID:-1 TSID:-1 SID:-1 PMT:FFFFFFFF FTA:False LCN:10000 SymbolRate:6875 Modulation:Mod64Qam
2008-02-05 22:06:05.644901 [22]: dvb:Submiting tunerequest Channel: subChannel:0 
2008-02-05 22:06:05.644901 [22]: dvb:Submit tunerequest size:1 new:0
2008-02-05 22:06:05.644901 [22]: subch:0 OnBeforeTune
2008-02-05 22:06:05.789423 [22]: subch:0 OnAfterTune
2008-02-05 22:06:05.789423 [22]: subch:0 OnGraphStart
2008-02-05 22:06:05.790400 [22]: subch:0 RunGraph: already running
2008-02-05 22:06:05.790400 [22]: subch:0 SetupPmtGrabber:pid FFFFFFFF sid:FFFFFFFF
2008-02-05 22:06:05.871449 [22]: Scan: tuner locked:True signal:0 quality:100
2008-02-05 22:06:13.531115 [15]: Controller: epg stop
2008-02-05 22:06:13.535021 [15]: Controller: epg start
2008-02-05 22:06:18.821792 [21]: Controller: epg stop
2008-02-05 22:06:18.908701 [21]: Controller: epg stop
2008-02-05 22:06:25.871146 [22]: 0) 0xA027 0x32 0x54A 0x133 Viasat Sport HD v:0 a:0 ac3:0 type:19
2008-02-05 22:06:25.872122 [22]: Found Unknown: Com Hem  Viasat Sport HD type:25 onid:A027 tsid:32 sid:54A
2008-02-05 22:06:25.872122 [22]: 1) 0xA027 0x32 0x54B 0x122 TV1000 HD v:0 a:0 ac3:0 type:19
2008-02-05 22:06:25.872122 [22]: Found Unknown: Com Hem  TV1000 HD type:25 onid:A027 tsid:32 sid:54B
2008-02-05 22:06:25.873099 [22]: Scan Got 2 from 2 channels

Looks like Found Unknown isn't a good sign. All SD channels that is found says Found DVBC.

 

[kalon]

Scanning and looking of the DVB-S2 with 8PSK channels does not work.
On the 4 transponders on Astra 19.2E only the channel with DVB-S2 and QPSK is working.
Checked with boths cards, Twinhan and Technotrend.

Can confirm the same problem on 0,8w S2 channels not found.

 

[gemx]

Just one thing came to my mind which can cause trouble
Especially with this snapshot
Please don't just extract the TVE3 files and overwrite the existing. Please uninstall and then install. The TsWriter interface have changed, so it's necessary that the filter is registered again.
If you are not sure, stop tvservice, open a command prompt (cmd.exe) and type in "regsvr32 <path to your installation>\TsWriter.ax and start tvservice

 

[GagReflex]

Second Issue: Channel Change

During live TV, changing a channel is problematic.
The channel info changes correctly, but,
the actual video content is not changing, ie, the ts buffer starts to play from the beginning till the moment I switched, and then freezes.
If I turn of TV, and ON again, it displays the new channel.
Kinda strange no?

I'm seeing this also... On channel change I just get a frozen picture of the previous channel. If i then fire up VLC the correct channel IS streaming, so this is a client issue, not a server issue.

 

[sis3970]

I allways uninstall and re-install.
To make sure, I registered TsWriter.ax again, but results are the same.

 

[kosiko]

Second Issue: Channel Change

During live TV, changing a channel is problematic.
The channel info changes correctly, but,
the actual video content is not changing, ie, the ts buffer starts to play from the beginning till the moment I switched, and then freezes.
If I turn of TV, and ON again, it displays the new channel.
Kinda strange no?

I'm seeing this also... On channel change I just get a frozen picture of the previous channel. If i then fire up VLC the correct channel IS streaming, so this is a client issue, not a server issue.

I got the same issue in the old SVN 16617, if I turn off TV before I change channel, most of time now problem; if I change channel without turn it off, some time I got "no video/audio detected" error, some time just freeze there. This SVN looks good, I will give a try later.

Question: For test MP & TVE3 SVN, should I uninstall all the old version? I check Wiki about test the nightly SVN but seems only talk about the MP SVN, not the TVE3 SVN. I like to have a easy way to keep my configuration and roll back to old SVN if any thing wrong.

 

[chrissooo]

Question: For test MP & TVE3 SVN, should I uninstall all the old version?

No,
just uninstall TV Server and TV Plugin.
After this install for first the MP SVN, then the TV Server and at least the TV Plugin.
When you will go back use the sme way but with older SVNs.
Imoptent is, that the MP SVN and he Server SVN is alway the same build.

Chrissooo