I'm having a hard time scanning for channels. I've used the guide posted and that was helpful on one PC, however I am now trying to get a good scan on another PC with no success.
I have 1 HDHomerun ATSC on my network, it is detected on both machines. The first machine is a full blown desktop. I installed MP 1.1 (TVServer only) and ran the config, scanned the HDHomerun tuner (Tune QAM Instead of ATSC - QAM Std Alternative) and the result was about 38 or so usable channels. I quickly found out NOT to use a wireless PC as a TV server, so I'm looking to move this to a HTPC.
Same software (or so I think) and doing the same scan against the same HDHomerun device results in 0 channels found. In looking at the results, there are many channels that say No signal, but a lot that say Nothing found. While watching the scan, I do see that the signal level and quality are very high on the channels where nothing was found. The only difference I can see between the two PCs is one is an AMD Desktop (Athlon X2 3400+ I believe) the other is a Atom 330 ION.
The HDHomerun config on the Atom machine DOES find the 38 channels.
I have also tried the 1.2Alpha with no success...
Any suggestions?
MediaPortal Version: 1.1 & 1.2a
MediaPortal Skin:
Windows Version: Win7 x64
CPU Type: Atom
HDD: 500G
Memory: 4G
Motherboard: Zotac IONITX
Video Card: inc
Video Card Driver: NVidia
Sound Card: inc
Sound Card AC3:
Sound Card Driver:
1. TV Card: HDHomerun
1. TV Card Type:
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:
I have 1 HDHomerun ATSC on my network, it is detected on both machines. The first machine is a full blown desktop. I installed MP 1.1 (TVServer only) and ran the config, scanned the HDHomerun tuner (Tune QAM Instead of ATSC - QAM Std Alternative) and the result was about 38 or so usable channels. I quickly found out NOT to use a wireless PC as a TV server, so I'm looking to move this to a HTPC.
Same software (or so I think) and doing the same scan against the same HDHomerun device results in 0 channels found. In looking at the results, there are many channels that say No signal, but a lot that say Nothing found. While watching the scan, I do see that the signal level and quality are very high on the channels where nothing was found. The only difference I can see between the two PCs is one is an AMD Desktop (Athlon X2 3400+ I believe) the other is a Atom 330 ION.
The HDHomerun config on the Atom machine DOES find the 38 channels.
I have also tried the 1.2Alpha with no success...
Any suggestions?
MediaPortal Version: 1.1 & 1.2a
MediaPortal Skin:
Windows Version: Win7 x64
CPU Type: Atom
HDD: 500G
Memory: 4G
Motherboard: Zotac IONITX
Video Card: inc
Video Card Driver: NVidia
Sound Card: inc
Sound Card AC3:
Sound Card Driver:
1. TV Card: HDHomerun
1. TV Card Type:
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection: