- June 9, 2009
- 11
- 1
https://forum.team-mediaportal.com/newthread.php?do=newthread&f=90
No graph could be created
TV-Server Version:
MediaPortal Version: 1.02
MediaPortal Skin: Default
Windows Version: Windows XP SP2
CPU Type: AMD Athlon 64 3000+
HDD: WD Cavier 80gb
Memory: Generic DDR-400 (1GB)
Motherboard: Gigabyte GA-KVM800M
Video Card: nVIDIA GeForce 6600GT
Video Card Driver: 185.85
Sound Card: Inbuilt
Sound Card AC3:
Sound Card Driver: VIA Vinyl
1. TV Card: Pixelview PlayTV Pro (BT878A based) (PV-BT878P+ Rev. 9D)
1. TV Card Type:
1. TV Card Driver: Tried both Pixelview drivers and also generic BT8xx drivers. Both work with Pixelview software.
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: InterVideo Video Encoder
MPEG2 Audio Codec: InterVideo Audio Encoder
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:
I have set up Mediaportal 1.0.2 using the automatic installer and the installation went fairly smoothly. When I start the TV-Server configuration and go to scan channels, the scanning appears to work the first time but gives back no channels with signal. Hitting the scan button again crashes the program. I decided to manually add and associate the channels with the card with the help of the working Pixelview software. In Mediaportal configuration, I set the InterVideo Video/Audio Encoder for the MPEG audio and video encoder in the Television section. Mediaportal starts fine but a "Unable to create graph" and "Unable to timeshift" error appears when I try to start the TV. Have I missed a step in UserGuides/SW-Cards_setup - MediaPortal Manual Documentation or is it something about my card that makes it impossible?
I will not hesitate to post logs when I can access the HTPC again.
No graph could be created
TV-Server Version:
MediaPortal Version: 1.02
MediaPortal Skin: Default
Windows Version: Windows XP SP2
CPU Type: AMD Athlon 64 3000+
HDD: WD Cavier 80gb
Memory: Generic DDR-400 (1GB)
Motherboard: Gigabyte GA-KVM800M
Video Card: nVIDIA GeForce 6600GT
Video Card Driver: 185.85
Sound Card: Inbuilt
Sound Card AC3:
Sound Card Driver: VIA Vinyl
1. TV Card: Pixelview PlayTV Pro (BT878A based) (PV-BT878P+ Rev. 9D)
1. TV Card Type:
1. TV Card Driver: Tried both Pixelview drivers and also generic BT8xx drivers. Both work with Pixelview software.
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: InterVideo Video Encoder
MPEG2 Audio Codec: InterVideo Audio Encoder
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:
I have set up Mediaportal 1.0.2 using the automatic installer and the installation went fairly smoothly. When I start the TV-Server configuration and go to scan channels, the scanning appears to work the first time but gives back no channels with signal. Hitting the scan button again crashes the program. I decided to manually add and associate the channels with the card with the help of the working Pixelview software. In Mediaportal configuration, I set the InterVideo Video/Audio Encoder for the MPEG audio and video encoder in the Television section. Mediaportal starts fine but a "Unable to create graph" and "Unable to timeshift" error appears when I try to start the TV. Have I missed a step in UserGuides/SW-Cards_setup - MediaPortal Manual Documentation or is it something about my card that makes it impossible?
I will not hesitate to post logs when I can access the HTPC again.