[confirm] Unable to scan 4,8 east on TV Server with TBS6984 DVB-S2 Quad Tuner (1 Viewer)

[andraves]

Hi folks.

I'm unable to find/scan any channels on 4,8E with my TBS 6984 Quad card. I've got the latest driver installed, 1.0.2.4.

Everything works fine on MP 1.2.3 with mm1352000 thread: https://forum.team-mediaportal.com/threads/tbs-ci-cam-support-and-other-improvements.103276/

I've done a clean install of Win7 and MP1.3.0. I did not use any config files from older MP version.

Best regards
Andraves

 

[porky996t]

Hi Andraves,

I have the TBS 6984 and have found it to work very well. I am using driver version 1.0.2.3

There have been other forum members that have had problems with the latest drivers.. see this thread (post #47 onwards)

 

[andraves]

Thank's for replay.

I've tried both 1.0.2.3 and 1.0.2.4 with no difference. I do belive this is a DiseqC problem. I got two Quad LNB's, one on 0,8W and the other on 4,8E.

I had the same problem with MP 1.2.3, but after using mm1352000 patch/fix for DiseqC everything works fine.

Andraves

 

[andraves]

I've tried to scan channels with MP 130 RC, and i've got the same problem. Could the reason be that MP list the satelitte as 4.9°E. Kingofsat use 4.8°E.

A

 

[Dunnys]

Hi,

Have more or less same issue, I'm using Terratech Cinergy S2 Card. After installing 1.3.0 I can no longer select 4.8°E but only 4.9°E, but after scanning I'm missing some of the cannels that were previously found on 4.8°E.

 

[andraves]

Hi,

Have more or less same issue, I'm using Terratech Cinergy S2 Card. After installing 1.3.0 I can no longer select 4.8°E but only 4.9°E, but after scanning I'm missing some of the cannels that were previously found on 4.8°E.

Hi Dunnys

I belive that my problem is a DiseqC problem. But I can also confirm your problem, but this is solved by a manual scan on selected transponders.

A

 

[Vasilich]

according to lyngsat there is no 4.8E satellites
http://www.lyngsat.com/Astra-4A-and-SES-5.html are both on 4.9E
what channels are you missing? post tvserver logs after scanning.