TV-Server Version: MediaPortal_Setup_1.0_RC4
MediaPortal Version: MediaPortal_Setup_1.0_RC4
MediaPortal Skin: Blue3 Wide
Windows Version: Windows XP SP3, Windows Update: 2008-11-25
CPU Type: AMD Athlon 64 X2 3800+
HDD: WDC WD1200JB
Memory: 4 x Crucial PC3200 DDR-DIMM 1024MB CL3
Motherboard: MSI K8N NEO2-FX
Video Card: Gigabyte GV-N76G256D-RH (GeForce 7600GS Fanless)
Video Card Driver: 6.14.10.9371
Sound Card: M-Audio Revolution 7.1
Sound Card AC3: Coaxial Out
Sound Card Driver: 5.10.0.5063
1. TV Card: FloppyDTV-T
1. TV Card Type: DVB-T
1. TV Card Driver: 4.8.0.0
2. TV Card: Pinnacle PCTV Dual DVB-T Pro (2000i)
2. TV Card Type: DVB-T
2. TV Card Driver: 4.0.4.0
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MPV
MPEG2 Audio Codec: MPA
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case: Silverstone SST-LC17
Cooling:
Power Supply: Corsair 650TX
Remote: Microsoft MCE
TV: Samsung F86
TV - HTPC Connection: DVI -> HDMI
Hi,
For me there has been trouble with tuning in multiple channels on the same transponder since the last couple of RCs. I think the problem started after RC1 but I am not sure, have no earlier logs.
Running Single Seat.
I have configured the Floppy DTV-T with CAM (default), and 100 as limit.
Have channels mapped to correct cards.
The FloppyDTV-T is the card with lowest priority so the Free-To-Air channels goes to the Pinnacel PCTC-card.
For the attached logs I did the following.
1. Cleared the logs.
2. Started MP.
3. Started TV, tuned to SVT1 on secondary card (Pinnacle PCTV).
4. Switched to "TV3" and started a recording.
5. Tried to switch to channel "Kanal5" with no success, "channel is encrypted"-message.
In the logs the following lines are where the timeout occurs:
2008-12-06 16:30:08.578125 [26]: card: WaitForTimeShiftFile - waiting _eventAudio & _eventVideo
2008-12-06 16:30:23.593750 [26]: card: WaitForTimeShiftFile - no audio was found after 15 seconds
If I stop the recording on TV3 I can switch to Kanal 5. Sometimes (1 out of 20) I can tune to another channel once but not more than that.
In the card configuration I can only choose "default" and "Astoncrypt 2", should it be so few CAMs and could this be an issue?
Does anyone else have this problem? I need all the help I can get, I would really like to have this fixed in the final version.
best regards
Marcus
MediaPortal Version: MediaPortal_Setup_1.0_RC4
MediaPortal Skin: Blue3 Wide
Windows Version: Windows XP SP3, Windows Update: 2008-11-25
CPU Type: AMD Athlon 64 X2 3800+
HDD: WDC WD1200JB
Memory: 4 x Crucial PC3200 DDR-DIMM 1024MB CL3
Motherboard: MSI K8N NEO2-FX
Video Card: Gigabyte GV-N76G256D-RH (GeForce 7600GS Fanless)
Video Card Driver: 6.14.10.9371
Sound Card: M-Audio Revolution 7.1
Sound Card AC3: Coaxial Out
Sound Card Driver: 5.10.0.5063
1. TV Card: FloppyDTV-T
1. TV Card Type: DVB-T
1. TV Card Driver: 4.8.0.0
2. TV Card: Pinnacle PCTV Dual DVB-T Pro (2000i)
2. TV Card Type: DVB-T
2. TV Card Driver: 4.0.4.0
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MPV
MPEG2 Audio Codec: MPA
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case: Silverstone SST-LC17
Cooling:
Power Supply: Corsair 650TX
Remote: Microsoft MCE
TV: Samsung F86
TV - HTPC Connection: DVI -> HDMI
Hi,
For me there has been trouble with tuning in multiple channels on the same transponder since the last couple of RCs. I think the problem started after RC1 but I am not sure, have no earlier logs.
Running Single Seat.
I have configured the Floppy DTV-T with CAM (default), and 100 as limit.
Have channels mapped to correct cards.
The FloppyDTV-T is the card with lowest priority so the Free-To-Air channels goes to the Pinnacel PCTC-card.
For the attached logs I did the following.
1. Cleared the logs.
2. Started MP.
3. Started TV, tuned to SVT1 on secondary card (Pinnacle PCTV).
4. Switched to "TV3" and started a recording.
5. Tried to switch to channel "Kanal5" with no success, "channel is encrypted"-message.
In the logs the following lines are where the timeout occurs:
2008-12-06 16:30:08.578125 [26]: card: WaitForTimeShiftFile - waiting _eventAudio & _eventVideo
2008-12-06 16:30:23.593750 [26]: card: WaitForTimeShiftFile - no audio was found after 15 seconds
If I stop the recording on TV3 I can switch to Kanal 5. Sometimes (1 out of 20) I can tune to another channel once but not more than that.
In the card configuration I can only choose "default" and "Astoncrypt 2", should it be so few CAMs and could this be an issue?
Does anyone else have this problem? I need all the help I can get, I would really like to have this fixed in the final version.
best regards
Marcus