Unknown error occurred when starting live-tv with tv-server (1 Viewer)

[fredrikml]

TV-Server Version: 1.0 RC1 update. Have also tried latest SVN from 25.04
MediaPortal Version: As above
MediaPortal Skin: Two
Windows Version: Windows Vista Home Premium SP1
CPU Type: Intel Dual Core E6750 2,66 GHz
HDD: 500 mb
Memory: 2gb
Motherboard: Asus P35 P5KC
Video Card: Asus Geforce 8600 GS
Video Card Driver: Latest from nvdida dated 20.12.07
Sound Card: Onboard. Realtek
Sound Card AC3: Same as Sound card
Sound Card Driver: 20.oktober
1. TV Card: Digital Everywhere Floppy DTV dvb-c
1. TV Card Type: DVB-c
1. TV Card Driver: Latest 30th of November
2. TV Card: Hauppauge PVR-500, not in use in Mediaportal
2. TV Card Type: Analog
2. TV Card Driver: Latest
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Have tried different, using Cyberlink Powerdvd
MPEG2 Audio Codec: AC3filter
h.264 Video Codec: Cyberlink Powerdvd
Satelite/CableTV Provider: Canal Digital Norway cable-tv
HTPC Case: Silverstone
Cooling: good
Power Supply: 500W, Mist
Remote: Windows media center remote
TV: Sony KV-W2000 1080P
TV - HTPC Connection: DVI-HDMI

When starting live-tv using client and tv-server I get the error messange. Timeshift can not start. Unknown error occurred. This does not happen if I restart my htpc and open Mediaportal at once. However, when starting the HTPC from standby I get this error message. This means that there most likely is something happening after resume from standby. Either that tv-server does not find the tv-card or the database is not ready etc.
I don't know.

I have seen other people having the same problem. This does not happen if I do not use the tv-server version.
But I prefer the tv-server due to all the other advantages.

Thanks for any help.

 

[ronilse]

Hi,
Logs doesn't contain anything about TV Server or MediaPortal so make a new one based on bug description you have.

Regard
Roy

 

[Paranoid Delusion]

In TVServer config\general there is a delay for detecting tuners, set it for say 20 seconds, make sure in the powerscheduler plugin reinitiliase tuners is enabled as well.

if this does not help, then as Roy says logs please, use the MPTestTool in your start menu to create.

 

[fredrikml]

TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard:
Video Card:
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card:
1. TV Card Type:
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:

Here is my logs.

It is a strange problem. Today I reinstalled RC1 refresh. Then it works. Then I updates to latest SVN. Didn't work. Went back to RC1 refresh. Does not work.

It has work without setting timeout to wait for the tv-cards, but I will test then.

Please look at my logs someone.

 

[SciDoctor]

Try these changes .

EPG idle grab - dissable.

Reinitialize tuners - enable. (in tvserverpowerscheduler plugin)

Also double check channel mappings .

Can you increase the cam limit for card 1.

Are you using standby or hibernation, in standby the tuners and graphs aren't being cleared (?)

Coming out of standby the tuner is possibly locked to an old channel or EPG grab.

This is the part of the log that is interesting.

2008-05-02 14:06:26.423351 [7]: OnPowerEvent: PowerStatus: Suspend
2008-05-02 14:06:26.424351 [7]: PowerScheduler: System is going to standby
2008-05-02 14:06:26.426351 [7]: Controller: epg stop
2008-05-02 14:06:26.431351 [7]: PowerScheduler: No pending events found in the future which should wakeup the system
2008-05-02 14:07:29.504000 [7]: TV service PowerEventThread 30
2008-05-02 14:07:29.504000 [7]: TV service PowerEventThread 30
2008-05-02 14:07:37.686000 [7]: OnPowerEvent: PowerStatus: ResumeAutomatic
2008-05-02 14:07:37.687000 [7]: PowerScheduler: System has resumed automatically from standby
2008-05-02 14:07:37.690000 [7]: Controller: epg start
2008-05-02 14:07:37.706000 [7]: OnPowerEvent: PowerStatus: ResumeSuspend
2008-05-02 14:07:37.706000 [7]: PowerScheduler: System has resumed from standby
2008-05-02 14:10:13.226000 [16]: Controller: StartTimeShifting TV 2 Nyhetskanalen 82
2008-05-02 14:10:13.226000 [16]: Controller: find free card for channel TV 2 Nyhetskanalen
2008-05-02 14:10:13.227000 [16]: Controller: got 1 tuning details for TV 2 Nyhetskanalen
2008-05-02 14:10:13.228000 [16]: Controller: channel #1 DVBC:tv:Canal Digital Kabel TV TV 2 Nyhetskanalen Freq:418000 ONID:70 TSID:1 SID:149 PMT:108 FTA:False LCN:10000 SymbolRate:6950 Modulation:Mod64Qam
2008-05-02 14:10:13.231000 [16]: Controller: card:1 typevbC is available priority:1 #users:0 same transponder:False
2008-05-02 14:10:13.232000 [16]: Controller: card:2 type:Analog is disabled
2008-05-02 14:10:13.232000 [16]: Controller: card:3 type:Analog is disabled
2008-05-02 14:10:13.234000 [16]: Controller: card:4 type:RadioWebStream cannot tune to channel
2008-05-02 14:10:13.235000 [16]: Controller: found 1 available
2008-05-02 14:10:13.236000 [16]: card: CardTune 1 TV 2 Nyhetskanalen HTPC:1:-1
2008-05-02 14:10:13.237000 [16]: card: Tune 1 to TV 2 Nyhetskanalen
2008-05-02 14:10:13.238000 [16]: card: user: HTPC:1:-1 tune DVBC:tv:Canal Digital Kabel TV TV 2 Nyhetskanalen Freq:418000 ONID:70 TSID:1 SID:149 PMT:108 FTA:False LCN:10000 SymbolRate:6950 Modulation:Mod64Qam
2008-05-02 14:10:13.242000 [16]: dvbc: TuneVBC:tv:Canal Digital Kabel TV TV 2 Nyhetskanalen Freq:418000 ONID:70 TSID:1 SID:149 PMT:108 FTA:False LCN:10000 SymbolRate:6950 Modulation:Mod64Qam
2008-05-02 14:10:13.243000 [16]: dvbubmiting tunerequest Channel:TV 2 Nyhetskanalen subChannel:-1
2008-05-02 14:10:13.243000 [16]: dvb:Getting new subchannel
2008-05-02 14:10:13.244000 [16]: dvb:GetNewSubChannel:0 #0
2008-05-02 14:10:13.245000 [16]: dvbubmit tunerequest size:1 new:0
2008-05-02 14:10:13.245000 [16]: subch:0 OnBeforeTune
2008-05-02 14:10:13.247000 [16]: subch:0 OnAfterTune
2008-05-02 14:10:13.247000 [16]: subch:0 OnGraphStart
2008-05-02 14:10:13.248000 [16]: subch0:RunGraph
2008-05-02 14:10:13.248000 [16]: dvb: RunGraph
2008-05-02 14:10:13.251000 [16]: dvb: RunGraph returns: 0x8007001F
2008-05-02 14:10:13.254000 [16]: card2:HTPC 1 -1
2008-05-02 14:10:13.255000 [16]: control1:HTPC 1 -1
2008-05-02 14:11:12.785000 [17]: Controller: StartTimeShifting TV 2 Nyhetskanalen 82
2008-05-02 14:11:12.786000 [17]: Controller: find free card for channel TV 2 Nyhetskanalen
2008-05-02 14:11:12.787000 [17]: Controller: got 1 tuning details for TV 2 Nyhetskanalen
2008-05-02 14:11:12.787000 [17]: Controller: channel #1 DVBC:tv:Canal Digital Kabel TV TV 2 Nyhetskanalen Freq:418000 ONID:70 TSID:1 SID:149 PMT:108 FTA:False LCN:10000 SymbolRate:6950 Modulation:Mod64Qam
2008-05-02 14:11:12.795000 [17]: Controller: card:1 typevbC is tuned to same transponder decrypting 1/1 channels. cam limit reached
2008-05-02 14:11:12.796000 [17]: Controller: card:2 type:Analog is disabled
2008-05-02 14:11:12.796000 [17]: Controller: card:3 type:Analog is disabled
2008-05-02 14:11:12.798000 [17]: Controller: card:4 type:RadioWebStream cannot tune to channel
2008-05-02 14:11:12.799000 [17]: Controller: found 0 available
2008-05-02 14:11:12.799000 [17]: Controller: StartTimeShifting failed:AllCardsBusy

 

[fredrikml]

Try these changes .

EPG idle grab - dissable.

Reinitialize tuners - enable. (in tvserverpowerscheduler plugin)

Also double check channel mappings .

Can you increase the cam limit for card 1.

Are you using standby or hibernation, in standby the tuners and graphs aren't being cleared (?)

Coming out of standby the tuner is possibly locked to an old channel or EPG grab.

This is the part of the log that is interesting.

2008-05-02 14:06:26.423351 [7]: OnPowerEvent: PowerStatus: Suspend
2008-05-02 14:06:26.424351 [7]: PowerScheduler: System is going to standby
2008-05-02 14:06:26.426351 [7]: Controller: epg stop
2008-05-02 14:06:26.431351 [7]: PowerScheduler: No pending events found in the future which should wakeup the system
2008-05-02 14:07:29.504000 [7]: TV service PowerEventThread 30
2008-05-02 14:07:29.504000 [7]: TV service PowerEventThread 30
2008-05-02 14:07:37.686000 [7]: OnPowerEvent: PowerStatus: ResumeAutomatic
2008-05-02 14:07:37.687000 [7]: PowerScheduler: System has resumed automatically from standby
2008-05-02 14:07:37.690000 [7]: Controller: epg start
2008-05-02 14:07:37.706000 [7]: OnPowerEvent: PowerStatus: ResumeSuspend
2008-05-02 14:07:37.706000 [7]: PowerScheduler: System has resumed from standby
2008-05-02 14:10:13.226000 [16]: Controller: StartTimeShifting TV 2 Nyhetskanalen 82
2008-05-02 14:10:13.226000 [16]: Controller: find free card for channel TV 2 Nyhetskanalen
2008-05-02 14:10:13.227000 [16]: Controller: got 1 tuning details for TV 2 Nyhetskanalen
2008-05-02 14:10:13.228000 [16]: Controller: channel #1 DVBC:tv:Canal Digital Kabel TV TV 2 Nyhetskanalen Freq:418000 ONID:70 TSID:1 SID:149 PMT:108 FTA:False LCN:10000 SymbolRate:6950 Modulation:Mod64Qam
2008-05-02 14:10:13.231000 [16]: Controller: card:1 typevbC is available priority:1 #users:0 same transponder:False
2008-05-02 14:10:13.232000 [16]: Controller: card:2 type:Analog is disabled
2008-05-02 14:10:13.232000 [16]: Controller: card:3 type:Analog is disabled
2008-05-02 14:10:13.234000 [16]: Controller: card:4 type:RadioWebStream cannot tune to channel
2008-05-02 14:10:13.235000 [16]: Controller: found 1 available
2008-05-02 14:10:13.236000 [16]: card: CardTune 1 TV 2 Nyhetskanalen HTPC:1:-1
2008-05-02 14:10:13.237000 [16]: card: Tune 1 to TV 2 Nyhetskanalen
2008-05-02 14:10:13.238000 [16]: card: user: HTPC:1:-1 tune DVBC:tv:Canal Digital Kabel TV TV 2 Nyhetskanalen Freq:418000 ONID:70 TSID:1 SID:149 PMT:108 FTA:False LCN:10000 SymbolRate:6950 Modulation:Mod64Qam
2008-05-02 14:10:13.242000 [16]: dvbc: TuneVBC:tv:Canal Digital Kabel TV TV 2 Nyhetskanalen Freq:418000 ONID:70 TSID:1 SID:149 PMT:108 FTA:False LCN:10000 SymbolRate:6950 Modulation:Mod64Qam
2008-05-02 14:10:13.243000 [16]: dvbubmiting tunerequest Channel:TV 2 Nyhetskanalen subChannel:-1
2008-05-02 14:10:13.243000 [16]: dvb:Getting new subchannel
2008-05-02 14:10:13.244000 [16]: dvb:GetNewSubChannel:0 #0
2008-05-02 14:10:13.245000 [16]: dvbubmit tunerequest size:1 new:0
2008-05-02 14:10:13.245000 [16]: subch:0 OnBeforeTune
2008-05-02 14:10:13.247000 [16]: subch:0 OnAfterTune
2008-05-02 14:10:13.247000 [16]: subch:0 OnGraphStart
2008-05-02 14:10:13.248000 [16]: subch0:RunGraph
2008-05-02 14:10:13.248000 [16]: dvb: RunGraph
2008-05-02 14:10:13.251000 [16]: dvb: RunGraph returns: 0x8007001F
2008-05-02 14:10:13.254000 [16]: card2:HTPC 1 -1
2008-05-02 14:10:13.255000 [16]: control1:HTPC 1 -1
2008-05-02 14:11:12.785000 [17]: Controller: StartTimeShifting TV 2 Nyhetskanalen 82
2008-05-02 14:11:12.786000 [17]: Controller: find free card for channel TV 2 Nyhetskanalen
2008-05-02 14:11:12.787000 [17]: Controller: got 1 tuning details for TV 2 Nyhetskanalen
2008-05-02 14:11:12.787000 [17]: Controller: channel #1 DVBC:tv:Canal Digital Kabel TV TV 2 Nyhetskanalen Freq:418000 ONID:70 TSID:1 SID:149 PMT:108 FTA:False LCN:10000 SymbolRate:6950 Modulation:Mod64Qam
2008-05-02 14:11:12.795000 [17]: Controller: card:1 typevbC is tuned to same transponder decrypting 1/1 channels. cam limit reached
2008-05-02 14:11:12.796000 [17]: Controller: card:2 type:Analog is disabled
2008-05-02 14:11:12.796000 [17]: Controller: card:3 type:Analog is disabled
2008-05-02 14:11:12.798000 [17]: Controller: card:4 type:RadioWebStream cannot tune to channel
2008-05-02 14:11:12.799000 [17]: Controller: found 0 available
2008-05-02 14:11:12.799000 [17]: Controller: StartTimeShifting failed:AllCardsBusy

TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard:
Video Card:
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card:
1. TV Card Type:
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:

I have tried your proposal without any success... thanks for trying.

 

[SciDoctor]

Any new logs after changes .

Helps if you delete old logs so new logs are more compact and easier to follow.