Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC3 (2006-03-18)
MediaPortal Skin: MCE
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPEG/AC3/DTS/LPCM Audio Decoder
Video Codec: Mpeg2Dec Filter
CPU Type: AMD Athlon 64 3000+
Memory: 2 GB
Motherboard: A8V-E DELUXE (ASUSTek Computer INC.)
TV Card Model: Hauppauge PVR 150 MCE
TV Card Type: Hardware
TV Card Driver: 051214 Amity2 2.0.35.23348.3264 (WHQL Signed)
Video Card Model: Nvidia Geforce 6600 GT (128 MB)
Video Card Driver: NVidia 84.21
Video Card Resolution: 1024x768
Video Render Type: Overlay
Audio Card Model: Realtek AC'97 Audio for VIA (R) Audio Controller
Audio Card Driver: 5.10.0.5870
Synopsis::
I have my WinTv card connected to a Bell ExpressVu satellite receiver, and use my PC monitor for viewing. As I use the satellite for changing channels, the WinTv need only be tuned to one channel (4).
From within the setup app, selecting my capture card then autotune for television channels to get the frequency for satellite-WinTv connection; I get full signal strength. But when I go to view television afterwards all I receive is white noise for video and audio.
I also have Beyond TV installed, of which I get a working television signal (viewable on PC). Prior to XP I used Windows XP MCE and the MCE portion also gave proper channel viewing, though MCE seemed to crash frequently, which is one of my reasons for changing.
Any thoughts, suggestions, etc?
MediaPortal Version: 0.2.0.0 RC3 (2006-03-18)
MediaPortal Skin: MCE
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPEG/AC3/DTS/LPCM Audio Decoder
Video Codec: Mpeg2Dec Filter
CPU Type: AMD Athlon 64 3000+
Memory: 2 GB
Motherboard: A8V-E DELUXE (ASUSTek Computer INC.)
TV Card Model: Hauppauge PVR 150 MCE
TV Card Type: Hardware
TV Card Driver: 051214 Amity2 2.0.35.23348.3264 (WHQL Signed)
Video Card Model: Nvidia Geforce 6600 GT (128 MB)
Video Card Driver: NVidia 84.21
Video Card Resolution: 1024x768
Video Render Type: Overlay
Audio Card Model: Realtek AC'97 Audio for VIA (R) Audio Controller
Audio Card Driver: 5.10.0.5870
Synopsis::
I have my WinTv card connected to a Bell ExpressVu satellite receiver, and use my PC monitor for viewing. As I use the satellite for changing channels, the WinTv need only be tuned to one channel (4).
From within the setup app, selecting my capture card then autotune for television channels to get the frequency for satellite-WinTv connection; I get full signal strength. But when I go to view television afterwards all I receive is white noise for video and audio.
I also have Beyond TV installed, of which I get a working television signal (viewable on PC). Prior to XP I used Windows XP MCE and the MCE portion also gave proper channel viewing, though MCE seemed to crash frequently, which is one of my reasons for changing.
Any thoughts, suggestions, etc?