WebEPG: No Listings Found (1 Viewer)

[Peter2]

TV-Server Version:
MediaPortal Version: 0.2.3-17086
MediaPortal Skin: FooTwo
Windows Version: Xp sp2
CPU Type: AMD Athlon 64 X2 4450E
HDD: Samsung 320GB Spinpoint T166 SataII
Memory: Apacer DDR2 PC6400 1024MB Passive
Motherboard: Gigabyte GA-MA78GM-S2H
Video Card: Asus EN8500GT Silent/HTP/256M
Video Card Driver: 6.14.11.6218
Sound Card: Onboard Realtek ALC889A
Sound Card AC3:
Sound Card Driver: 5.10.0.5532
1. TV Card: Hauppauge Win/TV PVR 350
1. TV Card Type: Analog
1. TV Card Driver: 1.18.21.22301
2. TV Card: Hauppauge Win/TV PVR 150
2. TV Card Type: Analog
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case: Antec Fusion
Cooling: Boxed cpu cooler & 1x120mm case fans (disconnected 2nd 120mm)
Power Supply: Standard
Remote: Hauppauge silver 45 buttons
TV: Sony KV-29FX20B
TV - HTPC Connection: (TV) Scart -> Scart convertor -> S-Video (Integrated TV-out of mobo)

I'm downloading the guide every other day but apparently since a few days, I do not get any info into my guide anymore - as of today, my guide is empty; every channels has a 'No data available' line behind it.
It doesn't seem to be the website because I'm downloading from multiple sites and just now, I deleted all the channelinfo in the WebEPG config tool and added a few again but without any luck.

In the webEPG.log file I get those 'WebEPG: No Listings Found' entries.

Any idea what is going on?

ps: I don't have the time these days to change a lot on my config, that's why being able to record is even more important. I hope to be able to install the new release very soon (looking forward)

 

[Peter2]

Still no data available

Hi guys,

Since I didn't get any answer on my cry for help, I've installed 1.0RC3 and still am stuck with the same problem: my tv guide doesn't show any program information.

I have reconfigured the channels multiple times in the mediaportal tv channels section and removed and added them again in the webepg configuration utility but still without any change.

On top of that, I have also tried to move the xmltv folder because whereas before it was on the same partition als mediaportal, now it's on c:\doc... and of course I have changed the path in the program guide section of the mediaportal configuration tool.

Beside a few channels that I configured manually in the webepg config utility, I also tried auto map.
This is what's in my webEPG.log:

2008-11-13 19:27:19.953125 [Info.][1]: WebEPG: Starting
2008-11-13 19:27:19.953125 [Info.][WebEPG-xmltv]: WebEPG: Using directories
2008-11-13 19:27:19.953125 [Info.][WebEPG-xmltv]:  WebEPG - D:\Team MediaPortal\MediaPortal
2008-11-13 19:27:19.953125 [Info.][WebEPG-xmltv]:  xmltv  - C:\Documents and Settings\All Users\Application Data\Team MediaPortal\MediaPortal\xmltv\
2008-11-13 19:27:19.953125 [Info.][WebEPG-xmltv]: Assembly versions:
2008-11-13 19:27:19.953125 [Info.][WebEPG-xmltv]: WebEPG 3.0.2.20432
2008-11-13 19:27:19.953125 [Info.][WebEPG-xmltv]: Utils 2.2.6.879
2008-11-13 19:27:19.968750 [Info.][WebEPG-xmltv]: Loading Config File: C:\Documents and Settings\All Users\Application Data\Team MediaPortal\MediaPortal\WebEPG\WebEPG.xml
2008-11-13 19:27:20.218750 [Info.][WebEPG-xmltv]: WebEPG: Loading Channel Config
2008-11-13 19:27:20.218750 [Debug][WebEPG-xmltv]:  Loading Channel Ned 1 ID: nederland1.nl
2008-11-13 19:27:20.218750 [Debug][WebEPG-xmltv]:  Loading Channel Ned 2 ID: nederland2.nl
2008-11-13 19:27:20.218750 [Debug][WebEPG-xmltv]:  Loading Channel Ned 3 ID: nederland3.nl
etc... for all the channels

2008-11-13 19:27:20.218750 [Info.][WebEPG-xmltv]: WebEPG: Getting Channel ID: nederland1.nl
2008-11-13 19:27:20.218750 [Info.][WebEPG-xmltv]:         [1 of 19]
2008-11-13 19:27:20.218750 [Info.][WebEPG-xmltv]: WebEPG: Opening BE\www_teveblad_be.xml
2008-11-13 19:27:20.468750 [Info.][WebEPG-xmltv]: WebEPG: Version: 2.0
2008-11-13 19:27:20.468750 [Info.][WebEPG-xmltv]: WebEPG: TimeZone, Local: Romance Standard Time
2008-11-13 19:27:20.468750 [Info.][WebEPG-xmltv]: WebEPG: TimeZone, Site : W. Europe Standard Time
2008-11-13 19:27:20.500000 [Info.][WebEPG-xmltv]: WebEPG: ChannelId: nederland1.nl
2008-11-13 19:27:20.500000 [Debug][WebEPG-xmltv]: WebEPG: Grab Start 19:27 13/11/2008
2008-11-13 19:27:20.531250 [Info.][WebEPG-xmltv]: WebEPG: Reading http://www.teveblad.be/ndl/zender.asp?move=full&channel=NED1&dag=11/13/2008 POST: 
2008-11-13 19:27:20.687500 [Info.][WebEPG-xmltv]: WebEPG: No Listings Found
2008-11-13 19:27:20.687500 [Info.][WebEPG-xmltv]: WebEPG: ChannelId: nederland1.nl grabber error
2008-11-13 19:27:20.687500 [Info.][WebEPG-xmltv]: WebEPG: Writing Channel to XMLTV: Ned 1
2008-11-13 19:27:20.687500 [Info.][WebEPG-xmltv]: WebEPG: Getting Channel ID: nederland2.nl
2008-11-13 19:27:20.687500 [Info.][WebEPG-xmltv]:         [2 of 19]
2008-11-13 19:27:20.687500 [Info.][WebEPG-xmltv]: WebEPG: ChannelId: nederland2.nl
2008-11-13 19:27:20.687500 [Debug][WebEPG-xmltv]: WebEPG: Grab Start 19:27 13/11/2008
2008-11-13 19:27:20.687500 [Info.][WebEPG-xmltv]: WebEPG: Reading http://www.teveblad.be/ndl/zender.asp?move=full&channel=NED2&dag=11/13/2008 POST: 
etc.. for all the channels

00:00:01.4062500 : Av. Rate 146,2023 KBps
2008-11-13 19:27:22.953125 [Info.][WebEPG-xmltv]: WebEPG: Finished

I also checked the 'MediaPortalSetup_WebEPG' wiki and similar threads but none of this was of any help.

Again, any help is greatly appreciated!

 

[gommer]

Hi there,

If you mention WebEPG, you should also mention the grabber that you use in the first place, especially the data source.
I see you're from Belgium, as I am. And you use teveblad.

That explains things. The teveblad website has a splash screen that interferes. On top of that, they seem to have implemented page numbers instead of listing a complete channel on a single page. Conclusion is that the grabber needs to be rewritten, unfortunately.

Kind regards, Marc

/edit: look for the Humo grabber which just came out.

 

[Peter2]

Hi gommer, thank you for looking into this matter!

Yes, I am using teveblad but before I reinstalled, I was using teveblad as well some other site for certain stations.
What do you mean by 'which grabber'? I'm using the standard xmltv that comes with MP.

Can you give me a hint no how to configure my system to use the Humo website?



Ok, I found the Humo xml file, have added it and just now made the changements in the webEPG configuration tool.
Let's hope it works!

THANK YOU VERY MUCH gommer!

Even though it too quite a while to process and I was afraid that something else was wrong, finally my guide is ok now!

 

[gommer]

Hi Peter,

I see you solved it. With 'grabber' I mean the xml file that defines the source's HTML layout.

Now I need to do this myself. It's always a struggle after more than a year not having tuned anything.

Cheers, Marc

 

[Peter2]

My happiness is partially (happy for switching to MP1.0RC3 from 0.2.3) gone since the tv guide is not working again.
I'm grabbing every other day and yesterday evening I noticed that my guide has data only until today so it has only succeeded grabbing once.

Any idea what is wrong? (I hope not the same problem as with teveblad - using humo now)
This is an extract of my webEPG.log file

2008-11-18 17:04:22.156250 [Info.][1]: WebEPG: Starting
2008-11-18 17:04:22.156250 [Info.][WebEPG-xmltv]: WebEPG: Using directories
2008-11-18 17:04:22.156250 [Info.][WebEPG-xmltv]:  WebEPG - D:\Team MediaPortal\MediaPortal
2008-11-18 17:04:22.156250 [Info.][WebEPG-xmltv]:  xmltv  - C:\Documents and Settings\All Users\Application Data\Team MediaPortal\MediaPortal\xmltv\
2008-11-18 17:04:22.156250 [Info.][WebEPG-xmltv]: Assembly versions:
2008-11-18 17:04:22.156250 [Info.][WebEPG-xmltv]: WebEPG 3.0.2.20432
2008-11-18 17:04:22.156250 [Info.][WebEPG-xmltv]: Utils 2.2.6.879
2008-11-18 17:04:22.171875 [Info.][WebEPG-xmltv]: Loading Config File: C:\Documents and Settings\All Users\Application Data\Team MediaPortal\MediaPortal\WebEPG\WebEPG.xml
2008-11-18 17:04:22.531250 [Info.][WebEPG-xmltv]: WebEPG: Loading Channel Config
2008-11-18 17:04:22.531250 [Debug][WebEPG-xmltv]:  Loading Channel Ned 1 ID: Ned1

etc for all the channels

2008-11-18 17:04:22.531250 [Info.][WebEPG-xmltv]: WebEPG: Getting Channel ID: Ned1
2008-11-18 17:04:22.531250 [Info.][WebEPG-xmltv]:         [1 of 19]
2008-11-18 17:04:22.531250 [Info.][WebEPG-xmltv]: WebEPG: Opening BE\1-www_humo_be.xml
2008-11-18 17:04:22.796875 [Info.][WebEPG-xmltv]: WebEPG: Version: 2.0
2008-11-18 17:04:22.796875 [Info.][WebEPG-xmltv]: WebEPG: TimeZone, Local: Romance Standard Time
2008-11-18 17:04:22.796875 [Info.][WebEPG-xmltv]: WebEPG: TimeZone, Site : W. Europe Standard Time
2008-11-18 17:04:22.828125 [Info.][WebEPG-xmltv]: WebEPG: ChannelId: Ned1
2008-11-18 17:04:22.828125 [Debug][WebEPG-xmltv]: WebEPG: Grab Start 17:04 18/11/2008
2008-11-18 17:04:22.859375 [Info.][WebEPG-xmltv]: WebEPG: Reading http://www.humo.be/cps/rde/xchg/humo/hs.xsl/epg_zender.html?move=full&channel=NED1&dag=11/18/2008 POST: 
2008-11-18 17:04:23.187500 [Info.][WebEPG-xmltv]: WebEPG: No Listings Found
2008-11-18 17:04:23.187500 [Info.][WebEPG-xmltv]: WebEPG: ChannelId: Ned1 grabber error
2008-11-18 17:04:23.187500 [Info.][WebEPG-xmltv]: WebEPG: Writing Channel to XMLTV: Ned 1

etc for all the channels

Thanks A LOT in advance if someone can help me with this!

 

[Peter2]

For everyone who bumped on this thread: the grabber was not working anymore, teveblad & humo have changed their data.

Solution: mc2xml and howto integrate in MP