- April 5, 2005
- 2,176
- 428
MediaPortal Version: 0.2.0.0 SVN REV 10039
Windows Version: Win XP Pro SP2
CPU Type: AMD Sempron 2300+
HDD: Samsung SP 2014N 200GB
Memory: 512 MB SD-RAM
Motherboard: MSI 7021
Motherboard Chipset: VIA VT 8377 Apollo KT 600
Motherboard Bios: AMI 09/09/04
Video Card: MSI Geforce FX5200
Video Card Driver: Detonator 84.21
Sound Card: VIA AC'97
Sound Card AC3: Coaxial Out VIA AC'97
Sound Card Driver: ?
1. TV Card: Hauppauge PVR 150 MCE
1. TV Card Type: Analog
1. TV Card Driver: 2.0.30.23074
2. TV Card: Hauppauge Nova-T 500
2. TV Card Type: DVB-T
2. TV Card Driver: 2.5e
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Nvidia Purevideo
MPEG2 Audio Codec: Nvidia Purevideo
Satelite/CableTV Provider: ISH
HTPC Case: Silverstone SST LC 13 Silver
Cooling: mCubed T-Balance
Power Supply: NoName, controlled by T-Balancer
Remote: Medion X10
TV: Philips CRT
TV - HTPC Connection: S-Video
SVN 11230
I am getting recording conflicts even if I have two idle TV-Cards. (See screenshot below).
DMAX is only available via cable, ARD is available for all cards. These two shown recordings are the only ones at that time.
My guess is that MP tries to use Analog-Card for ARD-Recording (which is already in use by DMAX-Recording). Tried to set up Card-Priorities (Analog higher, DVB-T lower and vice versa), but didnt change the problem.
Windows Version: Win XP Pro SP2
CPU Type: AMD Sempron 2300+
HDD: Samsung SP 2014N 200GB
Memory: 512 MB SD-RAM
Motherboard: MSI 7021
Motherboard Chipset: VIA VT 8377 Apollo KT 600
Motherboard Bios: AMI 09/09/04
Video Card: MSI Geforce FX5200
Video Card Driver: Detonator 84.21
Sound Card: VIA AC'97
Sound Card AC3: Coaxial Out VIA AC'97
Sound Card Driver: ?
1. TV Card: Hauppauge PVR 150 MCE
1. TV Card Type: Analog
1. TV Card Driver: 2.0.30.23074
2. TV Card: Hauppauge Nova-T 500
2. TV Card Type: DVB-T
2. TV Card Driver: 2.5e
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Nvidia Purevideo
MPEG2 Audio Codec: Nvidia Purevideo
Satelite/CableTV Provider: ISH
HTPC Case: Silverstone SST LC 13 Silver
Cooling: mCubed T-Balance
Power Supply: NoName, controlled by T-Balancer
Remote: Medion X10
TV: Philips CRT
TV - HTPC Connection: S-Video
SVN 11230
I am getting recording conflicts even if I have two idle TV-Cards. (See screenshot below).
DMAX is only available via cable, ARD is available for all cards. These two shown recordings are the only ones at that time.
My guess is that MP tries to use Analog-Card for ARD-Recording (which is already in use by DMAX-Recording). Tried to set up Card-Priorities (Analog higher, DVB-T lower and vice versa), but didnt change the problem.