Reply to thread

Message

Hello,
Both are connected as I'm using the Zalman (160XT Plus) LCD as secondary display (extended mode) in VGA (DVI->VGA).
The primary display is my LCD TV, connected by DVI-HDMI (using the DVI-HDMI adapter provided with the graphic card).

My config:

case: Zalman 160XT PLUS
MB: ASUS P5K-E Wifi-AP
CPU: Intel Core duo E6750
GC: Sapphire Radeon HD2600XT

the graphic card has two DVI out. One is connected with DVI-VGA adapter to the Zalman LCD, and the second is connected to the LCD TV with DVI-HDMI adapter (provided with the graphic card).

I missed to mention that when i set in clone mode, I still have only "monitor properties 0" in the Catalyst configuration window.

[QUOTE="NewMPUser, post: 265394, member: 60468"] Hello, Both are connected as I'm using the Zalman (160XT Plus) LCD as secondary display (extended mode) in VGA (DVI->VGA). The primary display is my LCD TV, connected by DVI-HDMI (using the DVI-HDMI adapter provided with the graphic card). My config: case: Zalman 160XT PLUS MB: ASUS P5K-E Wifi-AP CPU: Intel Core duo E6750 GC: Sapphire Radeon HD2600XT the graphic card has two DVI out. One is connected with DVI-VGA adapter to the Zalman LCD, and the second is connected to the LCD TV with DVI-HDMI adapter (provided with the graphic card). I missed to mention that when i set in clone mode, I still have only "monitor properties 0" in the Catalyst configuration window. [/QUOTE]

Verification