2 TT C-1501 cards both no signal (1 Viewer)

[ugo]

TV-Server Version: RC4
MediaPortal Version: RC4
MediaPortal Skin: Blue3
Windows Version: Vista 32bit
CPU Type: Intel Dual Core
HDD: WD
Memory: Corsair
Motherboard: Asus
Video Card: onboard
Video Card Driver:
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: TT Budget C-1501
1. TV Card Type: DVBC
1. TV Card Driver: 5.0.0.19
2. TV Card:TT Budget C-1501
2. TV Card Type: DVBC
2. TV Card Driver: 5.0.0.19
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider: ziggo
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:

I have built a new dedicated TV server with 2 TT Budget cards. After a clean installation the system is updated with SP1 and afterwards all mandatory updates. After that I installed the drivers of the TT cards. Then I installed RC4 dedicated TV Server on the system...

Now when I try to scan for channels I get the "No signal" Message on both cards when trying to scan... Please help cause I am trying stuff for a week now, and running out of ideas.

Thanks!

 

[ugo]

I reinstalled the whole pc with the new version 1.0 of the mediaportal tvserver and have the same issues...

 

[ronilse]

Hi,
Seems to be a problem with creating graph, why it fails i dunno. someone with more acknowledged to that has to look @ it, but have you tried with one card disabled?

Regards
Roy

 

[ugo]

Roy, thanks for the reply!

I have just uninstalled the driver of one of the cards, and tried it with the one disabled. This didn't resolve my issues.

This specific piece of the error log puzzles me:
2008-12-23 01:17:12.015311 [14]: Exception ystem.InvalidCastException: Unable to cast object of type 'MpTsAnalyzer' to type 'DirectShowLib.IBaseFilter'.
at DirectShowLib.IEnumFilters.Next(Int32 cFilters, IBaseFilter[] ppFilter, Int32& pcFetched)
at TvLibrary.Implementations.DVB.FilterGraphTools.RemoveAllFilters(IGraphBuilder graphBuilder)
at TvLibrary.Implementations.DVB.TvCardDvbBase.Decompose()
at TvLibrary.Implementations.DVB.TvCardDvbBase.Dispose()
at TvLibrary.Implementations.DVB.TvCardDVBC.BuildGraph()
at TvLibrary.Implementations.DVB.TvCardDVBC.Tune(Int32 subChannelId, IChannel channel)
at TvLibrary.Implementations.DVB.DvbBaseScanning.Scan(IChannel channel, ScanParameters settings)
at TvService.ChannelScanning.Scan(IChannel channel, ScanParameters settings)
Exception :Unable to cast object of type 'MpTsAnalyzer' to type 'DirectShowLib.IBaseFilter'.
site :Int32 Next(Int32, DirectShowLib.IBaseFilter[], Int32 ByRef)
source irectShowLib
stacktrace: at DirectShowLib.IEnumFilters.Next(Int32 cFilters, IBaseFilter[] ppFilter, Int32& pcFetched)
at TvLibrary.Implementations.DVB.FilterGraphTools.RemoveAllFilters(IGraphBuilder graphBuilder)
at TvLibrary.Implementations.DVB.TvCardDvbBase.Decompose()
at TvLibrary.Implementations.DVB.TvCardDvbBase.Dispose()
at TvLibrary.Implementations.DVB.TvCardDVBC.BuildGraph()
at TvLibrary.Implementations.DVB.TvCardDVBC.Tune(Int32 subChannelId, IChannel channel)
at TvLibrary.Implementations.DVB.DvbBaseScanning.Scan(IChannel channel, ScanParameters settings)
at TvService.ChannelScanning.Scan(IChannel channel, ScanParameters settings)


But I am not sure what to do next with it...

 

[morpheus_xx]

the logs shows a very strange behaviour...

some questions:
- you doesn't seem to have a CAM? is the "number of channels to decrypt" in TvServer card settings == 0?
- are both cards running correctly with other DVB apps?
- can you try to remove one card completly ?

I got such errors only after resuming from standby. this I solved using the MPStandByHandler, restarting tvservice and tuner devices on resume, then all its good

 

[ugo]

Thanks for the reply! Appriciate the help!

- you doesn't seem to have a CAM? is the "number of channels to decrypt" in TvServer card settings == 0?

This number is indeed 0 at the moment. Later if unencrypted channels work, I will continue with that part.

- are both cards running correctly with other DVB apps?

I don't have any other dvb programs installed yet, but I will look into this..

- can you try to remove one card completly ?

I tried this and it didn't help. One card only still no signal and the same errors in the log show up.

I will try to install the other card only now, just to make sure the card is not dead or anything, but I am really stuck here...