- December 1, 2008
- 237
- 21
- Home Country
-
Russian Federation
MediaPortal Version: 1.1.RC1
MediaPortal Skin: Blue-3
Windows Version: WinXP-SP3
CPU Type: Intel Core 2 Duo E8400 3.0GHz
HDD: WD 1000Gb
Memory: 2x1024 DDR2
Motherboard: ASUS P5K premium
Video Card: ASUS EN9600GT Silent/HTDI 512
Video Card Driver: 196.21
Sound Card: internal
MPEG2 Video Codec: Cyberlink Video/SP Decoder (PDVD 8)
MPEG2 Audio Codec: ffdshow
h.264 Video Codec: MPC decoder
HTPC Case: Silverstone CW03
Power Supply: Corsair VX450W
Remote: Soundgraph
TV: Pioneer PDP-5080XA
TV - HTPC Connection: DVI-HDMI
Is it possible to have 2 tuners for IPTV ?
I did sometests but not sure that they were successful.
What I did in TV server Configuration:
- set "2" to field "Number of IPTV cards"
- mapped all my already present channels (already mapped to the1st IPTV card) to the 2nd IPTV card (so, all the channels are mapped to both the cards)
In TV client I tried to do the following:
- selected some channel and started recording
- then I selected another channel to view
Parallely I opened TV server Conviguration and opened "Manual Control".
So, I can see that the 1st card has "Recording" state, the 2nd card has "Timeshifting" state.
Is it a successful result ?
I have some doubts because sometimes I opened "Active recordings" dialog and saw "No active recordings" message.
MediaPortal Skin: Blue-3
Windows Version: WinXP-SP3
CPU Type: Intel Core 2 Duo E8400 3.0GHz
HDD: WD 1000Gb
Memory: 2x1024 DDR2
Motherboard: ASUS P5K premium
Video Card: ASUS EN9600GT Silent/HTDI 512
Video Card Driver: 196.21
Sound Card: internal
MPEG2 Video Codec: Cyberlink Video/SP Decoder (PDVD 8)
MPEG2 Audio Codec: ffdshow
h.264 Video Codec: MPC decoder
HTPC Case: Silverstone CW03
Power Supply: Corsair VX450W
Remote: Soundgraph
TV: Pioneer PDP-5080XA
TV - HTPC Connection: DVI-HDMI
Is it possible to have 2 tuners for IPTV ?
I did sometests but not sure that they were successful.
What I did in TV server Configuration:
- set "2" to field "Number of IPTV cards"
- mapped all my already present channels (already mapped to the1st IPTV card) to the 2nd IPTV card (so, all the channels are mapped to both the cards)
In TV client I tried to do the following:
- selected some channel and started recording
- then I selected another channel to view
Parallely I opened TV server Conviguration and opened "Manual Control".
So, I can see that the 1st card has "Recording" state, the 2nd card has "Timeshifting" state.
Is it a successful result ?
I have some doubts because sometimes I opened "Active recordings" dialog and saw "No active recordings" message.