Netherlands
TV-Server Version:
MediaPortal Version: 1.0
MediaPortal Skin: StreamedMP
Windows Version: Viste Ultimate SP1
CPU Type: AMD 5000+
HDD: Samsung 160 + 500
Memory: 2gb DDR
Motherboard: BareBone ASUS V3-M2A690G
Video Card: BareBone ASUS V3-M2A690G
Video Card Driver: onboard X1200
Sound Card: OnBourd VIA
Sound Card AC3: Coaxial out (on board)
Sound Card Driver:
1. TV Card: Floppy DTV DVB_T (1.01)
1. TV Card Type: DVB-T
1. TV Card Driver: 4.45N
2. TV Card: Floppy DTV DVB_T (1.02)
2. TV Card Type: DVB-T
2. TV Card Driver: 4.45N
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Microsoft Mpeg 2 / DVT / FFD
MPEG2 Audio Codec: Microsoft
h.264 Video Codec: Haali
Satelite/CableTV Provider: Digitenne DVB - T
HTPC Case: BareBone ASUS V3-M2A690G
Cooling:
Power Supply:
Remote: Microsoft MCE
TV: LGE
TV - HTPC Connection: DVI
HI,
I love MP ........... but its is driving me crazy sometimes.
Strange problem: Both tv card don't work as I would like. The problem is that my second TV card stops working. Mostly after I recorded or timeshifted something. First time it mostly goes well.
When I start the system it wil record normally, and I can switch channels normally. If I stop the recording and try to record something else. It is unable to graph...Have an unknown error ... If I disable 1 of the cards the other is working fine. The cards are working properly (also fine in MCE-tvpack before)
Sometimes MP acts like it is recording and will then record the other cards channel ie switching channels in my recorder file.
(I tried to limit the cam settings to 1, reinstalled windows, updated Floppydtv drivers, so far no luck)
somebody knows a solution???
2 logs attached first where it's working.... the second where it doesn't anymore (2 minutes later after restart MP)
Thanks for an answer
MediaPortal Version: 1.0
MediaPortal Skin: StreamedMP
Windows Version: Viste Ultimate SP1
CPU Type: AMD 5000+
HDD: Samsung 160 + 500
Memory: 2gb DDR
Motherboard: BareBone ASUS V3-M2A690G
Video Card: BareBone ASUS V3-M2A690G
Video Card Driver: onboard X1200
Sound Card: OnBourd VIA
Sound Card AC3: Coaxial out (on board)
Sound Card Driver:
1. TV Card: Floppy DTV DVB_T (1.01)
1. TV Card Type: DVB-T
1. TV Card Driver: 4.45N
2. TV Card: Floppy DTV DVB_T (1.02)
2. TV Card Type: DVB-T
2. TV Card Driver: 4.45N
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Microsoft Mpeg 2 / DVT / FFD
MPEG2 Audio Codec: Microsoft
h.264 Video Codec: Haali
Satelite/CableTV Provider: Digitenne DVB - T
HTPC Case: BareBone ASUS V3-M2A690G
Cooling:
Power Supply:
Remote: Microsoft MCE
TV: LGE
TV - HTPC Connection: DVI
HI,
I love MP ........... but its is driving me crazy sometimes.
Strange problem: Both tv card don't work as I would like. The problem is that my second TV card stops working. Mostly after I recorded or timeshifted something. First time it mostly goes well.
When I start the system it wil record normally, and I can switch channels normally. If I stop the recording and try to record something else. It is unable to graph...Have an unknown error ... If I disable 1 of the cards the other is working fine. The cards are working properly (also fine in MCE-tvpack before)
Sometimes MP acts like it is recording and will then record the other cards channel ie switching channels in my recorder file.
(I tried to limit the cam settings to 1, reinstalled windows, updated Floppydtv drivers, so far no luck)
somebody knows a solution???
2 logs attached first where it's working.... the second where it doesn't anymore (2 minutes later after restart MP)
Thanks for an answer
