Reply to thread

Message

<blockquote data-quote="Win7" data-source="post: 406821" data-attributes="member: 89302">Ok sorry, that took some time. If the Nova TD 500 weren´t that expensive i would buy one to make the tests myself. I found an usb stick from terratec that should have the same chipset. Under Linux the same driver is used for the nova td 500 and the terratec cinergy dt usb xs diversity. So you might give the following driver a try:<a href="http://ftp.terratec.de/Receiver/Cinergy_DT_USB_XS_Diversity/Update/Cinergy_DT_USB_XS_Diversity_Drv_Vista_XP_3.12.0.0.exe" target="_blank">http://ftp.terratec.de/Receiver/Cinergy_DT_USB_XS_Diversity/Update/Cinergy_DT_USB_XS_Diversity_Drv_Vista_XP_3.12.0.0.exe</a>First i would make a backup of the system. Because if you install the driver the tv-server will find new cards and you have to remove the old cards ( those with type unknown ) and remap the channels to the new cards.Then the next Problem is the driver is written for the cinergy so you can´t update it automatically. Are you using the Remote of the tv-card? Because im sure it won´t work anymore!Ok here i try to explain the steps that are needed to use the driver above. Download the driver and extract it. Then enter the device manager and select the &quot;Hauppauge Nova TD 500a DVB-T Tuner Device&quot;, under the driver tab you choose &quot;update driver&quot;. Then select &quot;Browse my computer for driver software&quot;, next you select&nbsp; &quot;Let me pick from a list of device drivers on my computer&quot;. In the next windows select &quot;Have Disk&quot; and point to the location where you extracted the driver files.The you will see a list with four entries, select the &quot;Cinergy DT USB XS Diversity Capture. Now windows will complain the driver isn´t made for your hardware and so on, install the driver anyway! After that restart. And test it in the tv-server. I would only update one of the two cards, because then you may also use the remote and maybe its enough to have only one card installed as terratec card. I´m not sure if it will be working. Maybe the cinergy shows only as one card then i´ll have to find a way to disable the diversity Mode!Hope it helps even if it´s a bit complicated :sorry:</blockquote>

[QUOTE="Win7, post: 406821, member: 89302"] Ok sorry, that took some time. If the Nova TD 500 weren´t that expensive i would buy one to make the tests myself. I found an usb stick from terratec that should have the same chipset. Under Linux the same driver is used for the nova td 500 and the terratec cinergy dt usb xs diversity. So you might give the following driver a try: [URL="http://ftp.terratec.de/Receiver/Cinergy_DT_USB_XS_Diversity/Update/Cinergy_DT_USB_XS_Diversity_Drv_Vista_XP_3.12.0.0.exe"]http://ftp.terratec.de/Receiver/Cinergy_DT_USB_XS_Diversity/Update/Cinergy_DT_USB_XS_Diversity_Drv_Vista_XP_3.12.0.0.exe[/URL] First i would make a backup of the system. Because if you install the driver the tv-server will find new cards and you have to remove the old cards ( those with type unknown ) and remap the channels to the new cards. Then the next Problem is the driver is written for the cinergy so you can´t update it automatically. Are you using the Remote of the tv-card? Because im sure it won´t work anymore! Ok here i try to explain the steps that are needed to use the driver above. Download the driver and extract it. Then enter the device manager and select the "Hauppauge Nova TD 500a DVB-T Tuner Device", under the driver tab you choose "update driver". Then select "Browse my computer for driver software", next you select "Let me pick from a list of device drivers on my computer". In the next windows select "Have Disk" and point to the location where you extracted the driver files. The you will see a list with four entries, select the "Cinergy DT USB XS Diversity Capture. Now windows will complain the driver isn´t made for your hardware and so on, install the driver anyway! After that restart. And test it in the tv-server. I would only update one of the two cards, because then you may also use the remote and maybe its enough to have only one card installed as terratec card. I´m not sure if it will be working. Maybe the cinergy shows only as one card then i´ll have to find a way to disable the diversity Mode! Hope it helps even if it´s a bit complicated :sorry: [/QUOTE]

Verification