Adaptec AVC-2010 unable to preview in TV Server (1 Viewer)

GarthColeman

Portal Member
October 31, 2006
23
0
Home Country
United Kingdom United Kingdom
TV-Server Version:
MediaPortal Version: 1.0.0
MediaPortal Skin: Black and White
Windows Version: Win XP (SP3) MCE
CPU Type: AMD Athlon 64 x2 5400
HDD: Samsung Spinpoint 500GB
Memory: 2GB Corsair Dominator
Motherboard: Asus M3N78-VM
Video Card: Nvidia 8200 onboard
Video Card Driver:
Sound Card: Via onboard
Sound Card AC3:
Sound Card Driver:
1. TV Card: Terratec 2400 Cinergy
1. TV Card Type: DVB-T
1. TV Card Driver:
2. TV Card: Adaptec Videoh PCI (AVC-2010)
2. TV Card Type: Analog
2. TV Card Driver: 1.1.0.3100
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink Video Decoder (PDVD 8)
MPEG2 Audio Codec: Cyberlink Audio Decoder (PDVD 8)
h.264 Video Codec: Cyberlink Video Decoder (PDVD 8)
Satelite/CableTV Provider:
HTPC Case: Silverstone LC-20
Cooling: 1x80mm Intake fan, 2x80 Exhaust fan
Power Supply: Zalman Heatpipe 650w
Remote: Imon Remote
TV:
TV - HTPC Connection: HDMI cable

I have having a problem with the TV Server and my analog Adaptec Capture card, when trying to preview the S-video channels I get the error Preview failed:NoVideoAudioDetected

When looking in the error logs 2 things stand out
(1) an Error in Error.log 2009-02-08 16:38:59.250000 [13]: analog: unable to connect capture->tee/sink
(2) and an error in TV.log 2009-02-08 19:27:44.059946 [12]: card: WaitForTimeShiftFile - no audio was found after 20 seconds

I have tried numerous SVN builds and not had any luck, the DVB-T card is working perfectly on both this machine and another machine on the network that is set up as a client.

hopefully this will something simple that I have missed in the setup of the card.
 

GarthColeman

Portal Member
October 31, 2006
23
0
Home Country
United Kingdom United Kingdom
OK, So I have tried a few more things.

I have uninstalled all Mediaportal components (TV Server and Mediaportal) with the total cleanup option, I have then gone in and deleted all the Mediaportal Folders.

I also uninstalled the TV Card drivers, rebooted ran a Reg clean and then reinstalled the Tv card drivers, rebooted and then reinstalled Media Portal and TV Server.

Again I can tune my Terratec card in without any problems, it finds all the channels it should and can preview them without any problems.

The Adaptec card however will still not play ball, I have added the S-Video channels but am still unable to preview on the TV server and unable to start Timeshifting on the client machine. The logs confirm that the error message is still the same.
 

garry

Portal Pro
December 11, 2005
227
17
California
Home Country
United States of America United States of America
I was able to get the AVC-3610 (external usb dual analog tuner) working by making some code changes. I'll run a build that you can try out later today, I'd say there is a good chance that it will work.
 

GarthColeman

Portal Member
October 31, 2006
23
0
Home Country
United Kingdom United Kingdom
:D OK, am downloading the files now, will give them a try this evening and let you know.

Ok, its very good news!

I needed to register mpgmux.ax, but after that it works perfectly!

Thank you very very much!
 

GarthColeman

Portal Member
October 31, 2006
23
0
Home Country
United Kingdom United Kingdom
Was this patch included in the latest release (1.01.0) of MediaPortal?
 

Users who are viewing this thread

Similar threads

Hello, Since windows 7 is not supported yet by microsoft, I migrated from windows 7 x64 to windows 10 x64. I have a server on which a WinTV-quadHD card is installed. This card worked perfectly before the migration and no hardware change was made (not a single cable disconnected). Since my passage under windows 10 x64, I can't get...
Hello, Since windows 7 is not supported yet by microsoft, I migrated from windows 7 x64 to windows 10 x64. I have a server on...
Hello, Since windows 7 is not supported yet by microsoft, I migrated from windows 7 x64 to windows 10 x64. I have a server on...
Replies
0
Views
438
Sorry for the late response. In my experience, the EPG grabbing of a single transponder takes 2 to 3 minutes. Afterwards it takes 1 to 2 minutes to write the data to disk. To speed up the EPG stuff (not only writing but also reading the EPG guide in MediaPortal), I changed the program table (and only that table) from InnoDB to...
Sorry for the late response. In my experience, the EPG grabbing of a single transponder takes 2 to 3 minutes. Afterwards it takes...
I get a few "Continuity error..." after the EPG scan finished: [2021-01-30 18:56:10,278] [4c45530] [18c8] - mhw reset [2021-01-30...
Replies
2
Views
1K
I am trying to play LiveTV video within RadioTime plug-in and can't get any video channels to play. All the radio channels play fine. Most of the video files are Windows Media Video v8/9/10 I made sure both wmv3 wmv10 codecs in LAV and FFDshow are checked. I see that RadioTime is now a new software company called TuneIn How do I find...
I am trying to play LiveTV video within RadioTime plug-in and can't get any video channels to play. All the radio channels play...
I am trying to play LiveTV video within RadioTime plug-in and can't get any video channels to play. All the radio channels play...
Replies
0
Views
1K
Updated with the guide to install an Intel HDMI audio Device that can stream 192kHz/24bit. If you have any question, feel free to reply here.
Updated with the guide to install an Intel HDMI audio Device that can stream 192kHz/24bit. If you have any question, feel free to...
I switched to MePo 2 with the release of MePo 2.1.1, and in the last months I focused on learning the program and fine tuning it...
Replies
8
Views
2K
Okay, no problem. At least we know that there was no problem with TV Server because the new CAM works. Marking thread as "no bug"...
Okay, no problem. At least we know that there was no problem with TV Server because the new CAM works. Marking thread as "no bug"...
MediaPortal Version: 1.15.0 Description I've just added a CAM to my Technotrend c-1501 on a well-working system (w10, asus...
Replies
5
Views
2K
Top Bottom