Analog channels: how to find channelnumber with frequency? (1 Viewer)

[kkendall]

TV-Server Version: MP/TVserver 1 RC1
MediaPortal Version: MP/TVserver 1 RC1
MediaPortal Skin: BlueTwo
Windows Version: Vista
CPU Type: Intel Core 2 Duo E6750 775 1333FSB 2.66Ghz 4MB
HDD: 2x Samsung spinpoint 500GB
Memory: 2x Kingston DDR2 ValueRAM 1GB 667 CL5.0
Motherboard: Asus P5K
Video Card: ASUS EN7300TC256/TD
Video Card Driver:
Sound Card:
Sound Card AC3: AC3 and DTS: S/PDIF
Sound Card Driver:
1. TV Card: FloppyDTV
1. TV Card Type: DVB-C
1. TV Card Driver:
2. TV Card: Hauppauge PVR500
2. TV Card Type: analog
Satelite/CableTV Provider: CAIW
HTPC Case: Silverstone LC17b
Cooling:
Power Supply: ANTEC
Remote: Microsoft MCE 2005 remote
TV: Philips
TV - HTPC Connection: Composite


Hi, I have a problem with finding the right channels.
I know the frequencies of all of my analog channels. So I edited my analog channels to the correct frequencies. But I also have to tell what channel it is on and I don't know the channelnumbers...
I only have channelnumbers like s14 or c43, but tv-server config doesn't accept that... (I believe the 0.2.3.0 MP version did accept it...)

So my question is: How can I find the right analog channelnummer with the frequencies I have?

 

[kkendall]

Any suggestions anyone?

Does nobody know how to link 'S' and 'K' channelnumbers to normal channelnumbers without a 'S' or 'K' in front of it?

 

[vertiger]

if you input the frequency, the channel number is ignored - input something, it does not matter what

 

[kkendall]

if you input the frequency, the channel number is ignored - input something, it does not matter what

I wish that worked...but it doesn't. :sorry:

If I leave out the channelnumber and only fill in the frequency, you cannot click on 'OK'.
If I add 0, 6 or any number to the channelnumber plus the correct frequency, I can click on OK, but it keeps looking at the channelnumber and ignores the frequency...

Somehow, it ALWAYS looks at the channelnumber, no matter what frequency you enter...
It seems there is no way to use frequency for analog channels anymore.

 

[vertiger]

hmmm, that had worked for all version before RC1 (have not tested with RC1 as i have removed the analog card from my htpc) - why should they change than?

maybe you should issue an bugreport

 

[kkendall]

Never mind, apparently it needed THREE restarts or a one hour thinking period or something... First the changes had no effect, than only the first channel I tuned to was ok, the rest wasn't. And after my last retart everything works! Although I didn't change a thing since the time it didn't work. Anyways, I'm happy again!