- March 14, 2010
- 17
- 3
MediaPortal Version: MediaPortal 1.1.0 RC1 rev25080
MediaPortal Skin:
Windows Version: Windows7
CPU Type:
HDD:
Memory:
Motherboard:
Video Card: Intel HD Graphics
Video Card Driver:
Sound Card: SB Audigy2 ZS
Sound Card AC3:
Sound Card Driver:
1. TV Card: Cinergy HTC USB XS HD
1. TV Card Type: Hybrid
1. TV Card Driver: 5.09.1202.00 latest
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:
I have some problems with the analog tv. After I configured everything (installed intervideo encoder, scanned channels, etc.)
when I start the TV sometimes after some seconds it just stops. I have to turn off/on tv to make it work again. Sometimes I have to do this more than 2 times.
Other times.. if the tv is working the sound is a bit "choppy". I made a sample video to show you the problem, you can download it from here:
http://koli.kando.hu/dexter/MVI_2797.AVI
EDIT: I forgot to write that all the channels are also "waving" a bit. It is more noticeable if a static picture is on the tv.
Also the attached tv and error logs, can be found in this post:
https://forum.team-mediaportal.com/...ideoaudiodetected-analog-tv-80398/#post601840
MediaPortal Skin:
Windows Version: Windows7
CPU Type:
HDD:
Memory:
Motherboard:
Video Card: Intel HD Graphics
Video Card Driver:
Sound Card: SB Audigy2 ZS
Sound Card AC3:
Sound Card Driver:
1. TV Card: Cinergy HTC USB XS HD
1. TV Card Type: Hybrid
1. TV Card Driver: 5.09.1202.00 latest
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:
I have some problems with the analog tv. After I configured everything (installed intervideo encoder, scanned channels, etc.)
when I start the TV sometimes after some seconds it just stops. I have to turn off/on tv to make it work again. Sometimes I have to do this more than 2 times.
Other times.. if the tv is working the sound is a bit "choppy". I made a sample video to show you the problem, you can download it from here:
http://koli.kando.hu/dexter/MVI_2797.AVI
EDIT: I forgot to write that all the channels are also "waving" a bit. It is more noticeable if a static picture is on the tv.
Also the attached tv and error logs, can be found in this post:
https://forum.team-mediaportal.com/...ideoaudiodetected-analog-tv-80398/#post601840