- November 20, 2006
- 336
- 1
- Home Country
-
New Zealand
MediaPortal Version: 0.2.2 SVN Rev13533
MediaPortal Skin: Blue 2
TVEngine3 Verion:Rev13497
Windows Version: Xp Pro SP2
CPU Type: AMD xp2500
HDD: 40gb Maxtor (OS)
HDD: 80gb Seagate (Recording)
Memory: 512 DDR 400
Motherboard: Abit NF7
Motherboard Chipset: Nforce
Motherboard Bios: Pheonix
Video Card: NV FX 5200
Video Card Driver: 6.14
Sound Card: Nforce SoundStorm (Optical Out to receiver)
Sound Card AC3: As above
Sound Card Driver: Latest creative driver
1. TV Card: TechniSat SkyStar2 Rev 2.6
1. TV Card Type: DVB-S
1. TV Card Driver: 4.4.1 Beta Driver (WDM)
2. TV Card: Hauppauge 150MCE (S-Video in STB)
2. TV Card Type: Analog MPEG2
2. TV Card Driver: 2.0.48.24227
MPEG2 Video Codec: NVIDIA
MPEG2 Audio Codec: NVIDIA
Satelite/CableTV Provider: Free To Air only
HTPC Case: Compaq W4000 Worstation Case
Cooling: 2 intel P4 CPU fans 1 P/supply 1 for CPU!
Power Supply: 500 whatt?
Remote:MCE Ver 2 Remote and Keyboard
TV: Panasonic 29" WIth VGA in. (640x480!)
TV Client: Toshiba A70 P4 3.2 Laptop via 100Mpbs wired
Seems a bug has been introduced at TVE3 13499.
Reproduce:
1. Install TVE3 134979
2. Load MP and tune to an analog channel (received via svideo from STB)
3. Notice audio has squeaks at the peak of any high pitch sound. e.g.Words that end with "S" peak out almost to a squeak. It sounds like there is too much compression on the audio. This dosn't occur with Rev 13497.
Was something changed in the Hauppauge quality settings at 13499?
This problem is with TVE3. (The fault can be heard with VLC as the client)
This problem can be heard with local and remote client.
The attached log sets both follow the exact same process:
1.Stop Service
2.Delete all logs.
3.Start service
4.Tune (network client) to analog channel
5.Wait a few seconds and copy all logs to seperate folder named Rev1349x
Repeat for next Rev.
Thanks,
Rhys
MediaPortal Skin: Blue 2
TVEngine3 Verion:Rev13497
Windows Version: Xp Pro SP2
CPU Type: AMD xp2500
HDD: 40gb Maxtor (OS)
HDD: 80gb Seagate (Recording)
Memory: 512 DDR 400
Motherboard: Abit NF7
Motherboard Chipset: Nforce
Motherboard Bios: Pheonix
Video Card: NV FX 5200
Video Card Driver: 6.14
Sound Card: Nforce SoundStorm (Optical Out to receiver)
Sound Card AC3: As above
Sound Card Driver: Latest creative driver
1. TV Card: TechniSat SkyStar2 Rev 2.6
1. TV Card Type: DVB-S
1. TV Card Driver: 4.4.1 Beta Driver (WDM)
2. TV Card: Hauppauge 150MCE (S-Video in STB)
2. TV Card Type: Analog MPEG2
2. TV Card Driver: 2.0.48.24227
MPEG2 Video Codec: NVIDIA
MPEG2 Audio Codec: NVIDIA
Satelite/CableTV Provider: Free To Air only
HTPC Case: Compaq W4000 Worstation Case
Cooling: 2 intel P4 CPU fans 1 P/supply 1 for CPU!
Power Supply: 500 whatt?
Remote:MCE Ver 2 Remote and Keyboard
TV: Panasonic 29" WIth VGA in. (640x480!)
TV Client: Toshiba A70 P4 3.2 Laptop via 100Mpbs wired
Seems a bug has been introduced at TVE3 13499.
Reproduce:
1. Install TVE3 134979
2. Load MP and tune to an analog channel (received via svideo from STB)
3. Notice audio has squeaks at the peak of any high pitch sound. e.g.Words that end with "S" peak out almost to a squeak. It sounds like there is too much compression on the audio. This dosn't occur with Rev 13497.
Was something changed in the Hauppauge quality settings at 13499?
This problem is with TVE3. (The fault can be heard with VLC as the client)
This problem can be heard with local and remote client.
The attached log sets both follow the exact same process:
1.Stop Service
2.Delete all logs.
3.Start service
4.Tune (network client) to analog channel
5.Wait a few seconds and copy all logs to seperate folder named Rev1349x
Repeat for next Rev.
Thanks,
Rhys