Cannot Get Any Channels (1 Viewer)

[nLEyETn]

I just installed MediaPortal for the first time earlier today. At first I was able to find all my channels. I then messed with Schedules Direct setup for a while but finally found out a way to get that working as well. When I was trying out some things after I had gotten Schedules Direct to work, I noticed it wouldn't let me tune to any of the channels any more. I then tried previewing it in the TVServer Setup but that failed as well. I then reset my machine and tried doing a clean scan for all the channels but it failed on every single one. I tested out my Tuner in Media Center for Vista and it is still able to receive broadcasts very well. MediaPortal would fail every time though. I then completely uninstalled everything (TV-Engine, MediaPortal, and Client Plugin) and tried a fresh install for it. I'm following the same instructions I went through the first time but I still cannot get my TV Tuner card to work now. I checked the error.log and it is saying:

2008-03-14 21:47:28.118857 [12]: RemoteControl: Error getting server Instance - An existing connection was forcibly closed by the remote host
2008-03-14 21:47:29.117857 [12]: card: unable to connect to slave controller at:Code-Arsenal
2008-03-14 21:47:30.147857 [15]: card: unable to connect to slave controller at:Code-Arsenal
2008-03-14 21:47:31.177857 [15]: card: unable to connect to slave controller at:Code-Arsenal
2008-03-14 21:47:32.207857 [12]: card: unable to connect to slave controller at:Code-Arsenal
2008-03-14 21:47:33.500857 [15]: card: unable to connect to slave controller at:Code-Arsenal
2008-03-14 21:47:34.547857 [15]: card: unable to connect to slave controller at:Code-Arsenal
2008-03-14 21:47:35.587857 [9]: card: unable to connect to slave controller at:Code-Arsenal
2008-03-14 21:47:36.628857 [9]: card: unable to connect to slave controller at:Code-Arsenal
2008-03-14 21:47:37.667857 [9]: card: unable to connect to slave controller at:Code-Arsenal
2008-03-14 21:47:38.957857 [9]: card: unable to connect to slave controller at:Code-Arsenal

I also noticed in the tv.log it says:

2008-03-14 21:47:27.104857 [15]: card: Tuner locked: False
2008-03-14 21:47:27.105857 [15]: **************************************************
2008-03-14 21:47:27.106857 [15]: ***** SIGNAL LEVEL: 0, SIGNAL QUALITY: 0 *****
2008-03-14 21:47:27.107857 [15]: **************************************************
2008-03-14 21:47:29.138857 [8]: ATSC tune: QAM checkbox not selected... using Modulation 8Vsb
2008-03-14 21:47:29.139857 [8]: ATSC tune: PhysicalChannel: 3 Frequency: -1 Modulation: Mod8Vsb
2008-03-14 21:47:30.166857 [8]: ATSC tune: QAM checkbox not selected... using Modulation 8Vsb
2008-03-14 21:47:30.167857 [8]: ATSC tune: PhysicalChannel: 4 Frequency: -1 Modulation: Mod8Vsb
2008-03-14 21:47:31.198857 [8]: ATSC tune: QAM checkbox not selected... using Modulation 8Vsb
2008-03-14 21:47:31.200857 [8]: ATSC tune: PhysicalChannel: 5 Frequency: -1 Modulation: Mod8Vsb
2008-03-14 21:47:32.481857 [8]: ATSC tune: QAM checkbox not selected... using Modulation 8Vsb
2008-03-14 21:47:32.482857 [8]: ATSC tune: PhysicalChannel: 6 Frequency: -1 Modulation: Mod8Vsb

I thought where it said "card: Tuner locked: False" is interesting but I'm not sure it's actually relevant. Can somebody help me please.


TV-Server Version: svn--3-03-14-2008--05-09h--Rev17930
MediaPortal Version: 0.2.3.0 with svn--03-14-2008--05-06-Rev17930
MediaPortal Skin: Blue Wide
Windows Version: Vista Ultimate 64-bit
CPU Type: AMD Athlon 64 x2 4200+
HDD: Western Digital Caviar
Memory: Corsair 2GB DDR2-800 XMS2-6400
Motherboard: ASUS M2N-SLI Deluxe
Motherboard Chipset: NVIDIA nForce 570 SLI MCP
Motherboard Bios:
Video Card: NVIDIA Geforce 8800 GTS 640 MB
Video Card Driver: 169.28
Sound Card: Creative Sound Blaster X-Fi Platinum
Sound Card AC3:
Sound Card Driver: 2.15.0004
1. TV Card: ATI HDTV Wonder
1. TV Card Type: PCI
1. TV Card Driver: 3.0.83.2036
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider:
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:

 

[nLEyETn]

Well, I got mine to work again I simply forgot to change the server address in the first window of the TVServer configuration. It had a different address in IPv6 format, not sure which adapter it was for, but I just changed it to an IPv4 address that my computer uses and now it works again.