- October 13, 2006
- 58
- 1
- Home Country
-
Canada
TV-Server Version:
MediaPortal Version: 0.2.3.0 RC1
MediaPortal Skin: Blue Two Wide
Windows Version: XP Pro SP2
CPU Type: Athlon 64 X2 3800+
HDD: Seagate ST3200822AS 200GB SATA
Memory: 512MB DDR 3200 Dual Channel
Motherboard: MSI MS-7191
Motherboard Chipset: ATI RS482/SB450
Motherboard Bios: AMI V1.1
Video Card: ATI Radeon X300/X550
Video Card Driver: Catalyst 7.4
Sound Card: On Motherboard
Sound Card AC3: coax out
Sound Card Driver: 5.10.0.5172
1. TV Card: Hauppauge PVR-250
1. TV Card Type: analog
1. TV Card Driver: 2.0.30.23074
2. TV Card: Hauppauge PVR-150
2. TV Card Type: analog
2. TV Card Driver: 1.18.21.23257
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MPV Version ?
MPEG2 Audio Codec: MPA Version ?
Satelite/CableTV Provider:
HTPC Case: NMedia 280BA
Cooling:
Power Supply: Silverstone ATX-1136G 360W
Remote: none
TV: Hitachi 51F500
TV - HTPC Connection: DVI
I've had an occasional problem where MediaPortal messes up a recording on Channel 4. I schedule it, MediaPortal records it, but when I play it back it turns out that it wasn't channel 4 that was recorded. It appears that MediaPortal just started recording on whatever channel it was on without bothering to change to Channel 4. MediaPortal thinks that everything is fine. The recorded show is described as the channel 4 show, the length is right, the episode content is correct, but it's the wrong show! This doesn't happen on channels 5 or higher. I've never recorded anything from channels 2 or 3.
The attached log file includes an attempt to record Doctor Who on July 16 at 8:00pm (20:00) on channel 4. Unfortunately, the program recorded was from a different channel.
Note: I'm using the MCE skin which isn't quite compatible with RC1. There is an occasional error in the log due to this incompatibility. This has nothing to do with the 'channel 4' problem. This isn't an RC1 problem - it's been present for at least the past two versions.
Sorry for the rather large log file.
MediaPortal Version: 0.2.3.0 RC1
MediaPortal Skin: Blue Two Wide
Windows Version: XP Pro SP2
CPU Type: Athlon 64 X2 3800+
HDD: Seagate ST3200822AS 200GB SATA
Memory: 512MB DDR 3200 Dual Channel
Motherboard: MSI MS-7191
Motherboard Chipset: ATI RS482/SB450
Motherboard Bios: AMI V1.1
Video Card: ATI Radeon X300/X550
Video Card Driver: Catalyst 7.4
Sound Card: On Motherboard
Sound Card AC3: coax out
Sound Card Driver: 5.10.0.5172
1. TV Card: Hauppauge PVR-250
1. TV Card Type: analog
1. TV Card Driver: 2.0.30.23074
2. TV Card: Hauppauge PVR-150
2. TV Card Type: analog
2. TV Card Driver: 1.18.21.23257
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MPV Version ?
MPEG2 Audio Codec: MPA Version ?
Satelite/CableTV Provider:
HTPC Case: NMedia 280BA
Cooling:
Power Supply: Silverstone ATX-1136G 360W
Remote: none
TV: Hitachi 51F500
TV - HTPC Connection: DVI
I've had an occasional problem where MediaPortal messes up a recording on Channel 4. I schedule it, MediaPortal records it, but when I play it back it turns out that it wasn't channel 4 that was recorded. It appears that MediaPortal just started recording on whatever channel it was on without bothering to change to Channel 4. MediaPortal thinks that everything is fine. The recorded show is described as the channel 4 show, the length is right, the episode content is correct, but it's the wrong show! This doesn't happen on channels 5 or higher. I've never recorded anything from channels 2 or 3.
The attached log file includes an attempt to record Doctor Who on July 16 at 8:00pm (20:00) on channel 4. Unfortunately, the program recorded was from a different channel.
Note: I'm using the MCE skin which isn't quite compatible with RC1. There is an occasional error in the log due to this incompatibility. This has nothing to do with the 'channel 4' problem. This isn't an RC1 problem - it's been present for at least the past two versions.
Sorry for the rather large log file.
Sorry