Custom Data Grabber including Sky UK Channel/EPG Grabber (6 Viewers)

[onetoomany]

Attached is a set of log files. With the channels having PMT=0, I get "No Signal" when I run the test channels.
This is done from a clean database.

"LockedInOnSignal could not lock onto channel - no signal or bad signal"

If I do a manual scan over the top, the PMT values get populated, and I get a better result (although not perfect as I get a number of PMT time out errors)
"Timed out waiting for PMT after 10.000384 seconds. Increase the PMT timeout value?" (log files not included but can add if needed)

R

Try changing the Diseqc to "SimpleA" on your DVB-S card to see if this solves it.

Tried with SimpleA, but same issue ("LockedInOnSignal could not lock onto channel - no signal or bad signal").
Even tried dropping the database and doing a new scan from scratch. I've done several runs (as there is also a Diseqc setting in the Plugin as well as the TV Servers tab)

R

 

[DJBlu]

Attached is a set of log files. With the channels having PMT=0, I get "No Signal" when I run the test channels.
This is done from a clean database.

"LockedInOnSignal could not lock onto channel - no signal or bad signal"

If I do a manual scan over the top, the PMT values get populated, and I get a better result (although not perfect as I get a number of PMT time out errors)
"Timed out waiting for PMT after 10.000384 seconds. Increase the PMT timeout value?" (log files not included but can add if needed)

R

Try changing the Diseqc to "SimpleA" on your DVB-S card to see if this solves it.

Tried with SimpleA, but same issue ("LockedInOnSignal could not lock onto channel - no signal or bad signal").
Even tried dropping the database and doing a new scan from scratch. I've done several runs (as there is also a Diseqc setting in the Plugin as well as the TV Servers tab)

R

Does the same happen when you scan with the normal channel scanner?

 

[onetoomany]

Try changing the Diseqc to "SimpleA" on your DVB-S card to see if this solves it.

Tried with SimpleA, but same issue ("LockedInOnSignal could not lock onto channel - no signal or bad signal").
Even tried dropping the database and doing a new scan from scratch. I've done several runs (as there is also a Diseqc setting in the Plugin as well as the TV Servers tab)

R

Does the same happen when you scan with the normal channel scanner?

When I run the normal scanner, I can get a signal on most channels (however, there is with a different issue that seems a bit intermittent whereby some channels come up as "No PMT found")

Results from the "test channels" are:
# Time State Channel mSec Name Card Disc. Details
1 15:21:39 INF FX HD 123 stress-460 N/A N/A Channel is not mapped to any card
2 15:21:42 OK Info TV +1 2249 stress-153 2 0
3 15:21:42 INF Comedy Cen HD 25 stress-460 N/A N/A Channel is not mapped to any card
4 15:21:51 ERR BBC THREE 7849 stress-153 3 0 No signal
5 15:21:51 OK BET +1 762 stress-460 2 0
6 15:21:52 OK More4 848 stress-153 3 4
7 15:22:04 ERR BBC THREE 11358 stress-460 2 0 No PMT found
8 15:22:04 OK BBC 2 Wales 949 stress-153 2 0
9 15:22:05 INF ITV4 HD 27 stress-460 N/A 0 Channel is not mapped to any card
10 15:22:05 INF Sky Atlantic HD 16 stress-460 N/A 0 Channel is not mapped to any card
11 15:22:06 OK BBC 2 England 731 stress-153 2 0
12 15:22:06 OK E4 325 stress-460 3 0

 

[icam2]

Hi DJBlu just a quick question about the patch on page one is it only for revision 27982. I've just patched and complied the latest head revision and it goes fine. installs fine but when i run the sky uk plugin i get unable to start graph.

 

[wonkyd]

OK, tried it. This time got "Unknown Error"

Anything else I should try DJBlu? Besides take a baseball bat to it? 

Sorry pal, been a little busy.

Try this installer.

I changed something in the TVLibrary which the TSWriter should have provided.

Hi DJBlu,

Tried it, sorry to say SetupTV crashed again with this version. Logs attached.

Out of interest/desperation I tried Miroslav's version from the other thread for 1.2.0, that seems to still work for the EPG without any issues. I've attached the log for that too.

Thanks for looking into it!

 

[Ragnarok666]

I finally got some time to toy around with this plugin.

I like it alot, but it still has the age old problem of older 1st attempt incarnations for me, lots of channels with all the correct parameters except PMT=0 which prevents the channels from working. When it sort's channels it moved and doesn't copy, it moves channels out of my favourites channels list.

The PMT will never be added by the plugin, the tswriter should scan the PAT when you tune to the channel and update it. This was added a long time ago.

Can you upload your log files.

No need, I was trying to preview the channels in setup tv and was thinking what, not again. I'll give it a try in media portal proper sometime later.

 

[pcnut_uk]

Cant use patch as mepo say not 64bit is their an alternative patch anywhere?
Also can i make a suggestion of prefixing a number infront of the link to the file download to denote the order in which to install.

MP is a 32 bit application and a patch is just a text file.
The patches do not need applying in an order as they just change the source code from a particular version.

Not sure what you are having an issue with

I am renaminig the patch with a ".exe" extension then running, this is where i am getting an error message about 32 and 64 bit operating system version conflicts. maybe this is not the correct way to install these patches????
I am running win7 64bit

 

[Wbunaarf]

MP is a 32 bit application and a patch is just a text file.
The patches do not need applying in an order as they just change the source code from a particular version.

Not sure what you are having an issue with

I am renaminig the patch with a ".exe" extension then running, this is where i am getting an error message about 32 and 64 bit operating system version conflicts. maybe this is not the correct way to install these patches????
I am running win7 64bit

Are you referring to the files with the .patch extension? If so, you can't just rename and execute them. As jameson_uk said, these files are text files containing changes to MP's _source_ files. To use them, you need to grab the source code from SVN, apply the patches and recompile MP (Compiling - MediaPortal Wiki).

//Johannes

 

[robyf]

Hi DJBlu

I think I found a problem with your patch. Some channels are tuned but I cannot see anything (for instance Italia1 or Sky TG24). This with last SVN 27992 and your patch for last SVN applied and compiled.

If I revert to stock SVN with the same tvdb I have no problem with the same channels.

Other channels work (like sky uno for instance) or sky sport HD.

I post full logs.

Thanks
Roby

 

[onetoomany]

I've also got the scanner crashing out the TV service every half day or so.

2011-06-30 15:02:54.744119 [(11)]: Tvservice stopped due to an unhandled app domain exception System.IndexOutOfRangeException: Index was outside the bounds of the array.
at Sky_UK_Channel_and_EPG_Grabber.SkyGrabber.ParseSDT(Section Data, Int32 Length)
at Sky_UK_Channel_and_EPG_Grabber.SkyGrabber.ParseChannels(Section Data, Int32 Length)
at Sky_UK_Channel_and_EPG_Grabber.SkyGrabber.OnTSPacket(Int32 Pid, Int32 Length, Section Data)
at Custom_Data_Grabber.CustomDataGRabber.ProcessPackets(String Filename)
at Custom_Data_Grabber.CustomDataGRabber.GrabData1(Object[] ChannelID1)
at Custom_Data_Grabber.CustomDataGRabber._Lambda$__1(Object a0)
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)

(running latest versions from front page of this thread on dedicated server)