Reply to thread

Message

<blockquote data-quote="damaster" data-source="post: 207562" data-attributes="member: 60795">Can you describe your BeV antenna setup and how you configured it in MediaPortal?&nbsp; I'm using a Dish500 twin LNB for Bev 82+91 going into one port of a DiseqC and I have a separate dish with a dual LNB pointing to Dish 61.5 going into the second port of the same DiseqC.Right now, I have it all working (after lots of experimentation) on a Viewsat FTA receiver configured as follows:- Bev 82 on port 1 of DiseqC then sat1 on a legacy SW21- Bev 91 on port 1 of DiseqC then sat2 on a legacy SW21- Dish 61.5 on port 2 of DiseqCAll of this works wonderfully, as I assume the internals of the Dish500 twin LNB must be equivalent to a SW21.&nbsp; Now, my question is, is it possible to execute such a configuration in MediaPortal?For your reference, this is the Dish500 twin LNB that I use for the Bev birds (not to be confused with the DishPro twin):<img src="http://www.dbsinstall.com/N-images/dishes/twin_tm.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />And this is the basic dual LNB used for the Dish 61.5 bird:<img src="http://www.dbsinstall.com/N-images/dishes/legacy_dualLNBF.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></blockquote>

[QUOTE="damaster, post: 207562, member: 60795"] Can you describe your BeV antenna setup and how you configured it in MediaPortal? I'm using a Dish500 twin LNB for Bev 82+91 going into one port of a DiseqC and I have a separate dish with a dual LNB pointing to Dish 61.5 going into the second port of the same DiseqC. Right now, I have it all working (after lots of experimentation) on a Viewsat FTA receiver configured as follows: - Bev 82 on port 1 of DiseqC then sat1 on a legacy SW21 - Bev 91 on port 1 of DiseqC then sat2 on a legacy SW21 - Dish 61.5 on port 2 of DiseqC All of this works wonderfully, as I assume the internals of the Dish500 twin LNB must be equivalent to a SW21. Now, my question is, is it possible to execute such a configuration in MediaPortal? For your reference, this is the Dish500 twin LNB that I use for the Bev birds (not to be confused with the DishPro twin): [IMG]http://www.dbsinstall.com/N-images/dishes/twin_tm.jpg[/IMG] And this is the basic dual LNB used for the Dish 61.5 bird: [IMG]http://www.dbsinstall.com/N-images/dishes/legacy_dualLNBF.jpg[/IMG] [/QUOTE]

Verification