Definitive list of supported (+ unsupported) capture cards (1 Viewer)

dman_lfc

Retired Team Member
  • Premium Supporter
  • July 28, 2004
    1,772
    30
    UK
    Home Country
    New Zealand New Zealand

    flash4it

    New Member
    February 16, 2005
    2
    0
    Good morning,
    I have a problem with this card.
    The error is "Unable to create graph for this device".
    My configuration is:
    asus k8n-e
    amd64 3400
    512 mb ram
    geforce fx 5600
    twinhan vision dtv dvb-t with bda drivere version 1.2.2.0
    windows xp sp2 with last windows update.
    mp version 0.2.0.0 RC1
    In this file mediaportal.log there are these errors when DVBGraphBDA is created:

    17/09/2005 18.37.42 DVBGraphBDA:CreateGraph().
    17/09/2005 18.37.42 DVBGraphBDA: Added filter <Microsoft DVBT Network Provider> with moniker <@device:sw:{71985F4B-1CA1-11D3-9CC8-00C04F7971E0}\Microsoft DVBT Network Provider>
    17/09/2005 18.37.42 DVBGraphBDA: setupTuningSpace()
    17/09/2005 18.37.42 DVBGraphBDA: check available tuningspaces
    17/09/2005 18.37.42 DVBGraphBDA: found 2 tuning spaces
    17/09/2005 18.37.42 DVBGraphBDA: used tuningspace:1 Mediaportal DVB-T Mediaportal DVB-T
    17/09/2005 18.37.43 DVBGraphBDA: Added filter <TwinHan DVBT BDA Tuner Filter> with moniker <@device:pnp:\\?\pci#ven_109e&dev_036e&subsys_00011822&rev_11#4&22775069&0&4070#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{e5644cc4-17a1-4eed-bd90-74fda1d65423}>
    17/09/2005 18.37.43 DVBGraphBDA: Added filter <TwinHan DVBT BDA Capture Filter> with moniker <@device:pnp:\\?\pci#ven_109e&dev_0878&subsys_00011822&rev_11#4&22775069&0&4170#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{5297613a-d97d-47f4-af3c-af825d846701}>
    17/09/2005 18.37.43 DVBGraphBDA: Adding configured pin connections...
    17/09/2005 18.37.43 DVBGraphBDA: Connecting <Microsoft DVBT Network Provider>:0 with <TwinHan DVBT BDA Tuner Filter>:0
    17/09/2005 18.37.43 DVBGraphBDA: Connecting <TwinHan DVBT BDA Tuner Filter>:0 with <TwinHan DVBT BDA Capture Filter>:0
    17/09/2005 18.37.43 DVBGraphBDA:Failed to add Tee/Sink-Sink converter filter to graph

    how can I resolve this problem ?
    can you help me ?
    thanks
     

    rosco99

    Portal Member
    May 10, 2005
    32
    0
    MossVale, NSW, Australia
    forbes said:
    tom1502 said:
    I am using, a Hauppauge WinTV Nova-s PCI CArd, wich is very Popular in Germany, i think...
    It is a PCI- Card with no HW Decoder --> So it uses Softwaredecoding
    ...

    Actually, I think its a DVB-s card. Frodo is working hard at the moment to support DVB-s cards with BDA drivers so you might be able to help him. See this thread here:
    thanks.
    Is this card fully supported now?. I have one which i can tune in but I can not get it to display on TV.(see my thread on Tuning on Austar)
     

    Poida00

    New Member
    October 23, 2005
    1
    0
    Australia
    Winfast DTV 1000T - Has anyone tried yet ?

    Winfast DTV 1000T - Has anyone tried yet ?

    The software that comes with the card works fine for TV & PVR. But can't get it work in few of the Media Center Apps. Which I would before Media Portal, as for it's function & simplicity.

    I built a new PC:
    Intel 945 GNTLKR Board
    P4 D 830
    x2 512 DDR2 533
    x2 Western Dig. 250gig 7200rpm 16mg cache - Raid Striped
    Leadtek 6800 LE 256mb
    Leadtek Winfast DTV 1000T
    Samsung 913BS LCD

    Using Existing LG 4160 DVDRW ( Until Blueray comes out mid 2006 by LG)

    Much appreciate any help.

    Regards
    Poida
     

    otla

    Portal Member
    February 19, 2005
    22
    0
    :roll:

    I hav etrouble with the Rc2 release and xfx nvtv singel tuner card. When I choose the card I get and error message "Cant build graphs for this card" or something like that.

    I worked with 0.2Rc1. I Have tried some of the cvs-updates with Rc1, and its the same problem.

    Anyone that know what to do. Do I have to make graphs myself. If so how do I do then.

    Greatful of all the help I can get.
     

    4Aces

    New Member
    April 24, 2006
    2
    0
    Leadtek PVR2000

    PVR2000, You say it's supported, however once installing your software not a thing was found neither the MCE oem version or the retail version were recognized by your software. I didn't even get it to scan channels.
     

    mzemina

    Retired Team Member
  • Premium Supporter
  • February 23, 2005
    2,065
    14
    Tulsa, OK
    Home Country
    United States of America United States of America
    In this forum, go to this post. Follow the directions. Please note that MediaPortal is beta software and there maybe bugs. If you want to help out to make this software even better please do help us out.

    Mike
     

    sbaldock

    Portal Member
    March 21, 2006
    26
    0
    MSI MEGASKY 580 chipset

    Something to add to your wiki - the chipset for the MSI MEGASKY 580 USB tuner is the ULi M9207 (I own one!!)
     

    sbaldock

    Portal Member
    March 21, 2006
    26
    0
    Hauppage HVR-1300

    Is the Hauppage HVR-1300 supported? I may consider changing to an internal card from my USB tuner...
     

    Users who are viewing this thread

    Top Bottom