Digital Devices: cascaded CAM support (5 Viewers)

[Darkroom]

AW: Digital Devices: cascaded CAM support

So After Magny trys everything workes for je
I reparier MySQL , but ididn t geht the alphacrypt To work with the octopus.
So i insta
So i installed the Solo CI additional with the alphacrypt and the maxcam in the octopus
Now everything Works for the First Tests


darkroom

 

[Palm_Maniac]

AW: Digital Devices: cascaded CAM support

Hi,

i have now the new DD Octopus Dual-CI Card with one Cine-S2 Twin Modul. In the CI i use a Maxcam Twin and Alphacrypt Classic. If I look at a TV station, and starts on the same transponder comprises a second TV channel, the first is re-encrypted. This happens at stations that are decrypted on the MaxCam, as well as for stations that are decrypted on the Alphacrypt. The MTD does not seem to work. My configuration looks like that I have assigned the MaxCam the first card and the Alphacrypt the second. If there is still a mistake here or there is not yet implemented? Which log files are required to find the problem?

Thank you,

Palm_Maniac

 

[Darkroom]

AW: Digital Devices: cascaded CAM support

Hello Palm Maniak,

I read somewhere When you use Description you Need a Tuner for every channel (diedn't tried it yet)
So for the Transparent Dual Cam you have to enable both cams to both Tuners and use the Lib here in this Tread
For me this Works Fine.

 

[Palm_Maniac]

AW: Digital Devices: cascaded CAM support

Hi,

i test it and enable both cams to both tuners, but i have the same problem. Channels on the same transponder can´t decrypt. For example, when i watch Prosieben HD and a other client switch to Kabel 1 HD, then Prosieben HD is scrambled. Swirch the other client to VOX HD, then it works perfect. The same on Sky. Different Channles from the same Transponder can´t decode at the same time. The second one is open, the first one is scrambled. Thats my problem. When you have HD+, please test it.

 

[Darkroom]

AW: Digital Devices: cascaded CAM support

So i tested it again a hour ago. I made the mistake to test decryption of 4 channels on different tuners. on the same Transponder the CAM couldn´t descramble mor than one channel (i read somewhere - don´t know where) - so in the server config i allow only one channel to descramble for 1 tuner and it works without a problem.
Cause i have 4 Tuner, i have always enough ressource. i didn´t test it today with the alphacrypt - only with the maxcam+.
You write you have the maxcam twin and in your sign you wrote maxcam+ - what kind of maxcam you use (they are different).

 

[Palm_Maniac]

AW: Digital Devices: cascaded CAM support

The Sign is now actual.

Yes, two TV channels from the same transponder on a tuner can not decode. Exactly the problem is with me also. Is this still an issue of MP, or the TV card driver?

Later I will also run at 4 tuner in a separate TV-Server, then there would not really the problem, but it was not planned that way. All my previous TV cards could handle this without problems, then why do the DD cards just such problems. It is after all advertised with MTD and is not a limitation with it. Should there not be an issue of MP, then we should ask all the time with digital devices and explain the problem, if it is not already known.

 

[Palm_Maniac]

AW: Digital Devices: cascaded CAM support

Hi,

I have today written to Digital Devices and am now a little smarter.

If you assign all CI slots all tuners, the hardware is located in the multi-transponder mode. In MTM, each tuner can only decode one channel simultaneously. Is it any tuner but a CI exclusive, then the tuner is in the single transponder mode. Then all the service of a transponder sent by the CI and then you can decrypt more than one service of a transponder at the same time. In theory. But even that does not work for me. Let's see what they respond.

 

[DjeC64]

This is still confusing even for DD.

What I understood is that you need to assign CAM to each tuner with Cineconfig. Then in MePo you must assign 1 CAM per tuner. Try that.

 

[Palm_Maniac]

AW: Digital Devices: cascaded CAM support

Hi,

I described the problem once digital devices. According to DD, the entire transponder stream is sent to the CI, if a CAM only a tuner has been assigned. At least the hardware is so. That is to say, wait until the development of support for the Octopus-CI will continue. It can be currently solved with no configuration setting.

 

[DjeC64]

Do you mean that a full transponder stream is sent to the CI per CAM/tuner allocation? So if the CAM is assigned to 2 tuner then 2 transponders are sent to it!
I am not surprised that MTD does not work then.
DD needs to provide a solution to it.