DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC) (2 Viewers)

[MJGraf]

Hi Saschinho1981,

is this a confirmation that this card: DuoFlex CT PCIe - Digital Devices Distribution UG (haftungsbeschränkt) works?

If so, did you use MP 1.1.1 with the patch from the first post or did you use MP 1.2.0 alpha?

Thanks,
Michael

 

[jarroz]

He Morpheus,

A small question: Can we use your v3 patch with the MP 1.1.2 Installer?

Regards,
Jarroz

 

[Saschinho1981]

AW: Re: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Hi Saschinho1981,

is this a confirmation that this card: DuoFlex CT PCIe - Digital Devices Distribution UG (haftungsbeschränkt) works?

If so, did you use MP 1.1.1 with the patch from the first post or did you use MP 1.2.0 alpha?

Thanks,
Michael

Hi Michael,

Im using the DD Duoflex CT (exactly the linked one) with Cam-Modul. MP Version is 1.1.1. I tried 1.2 before and it didnt work.

With morpheus new v.3 TV-Server-Update everey channel is found and encrypted, the cam menue is available, timeshift works, both tuners work (tried parallel recording of some shows).

From that point this is a confirmation, but i just tested it for 1-2 hours.

Sascha

 

[MJGraf]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Hi Sascha,

thanks so much. If it works for 1-2 hours, then it works - at least from my point of view

Time to by a new DVB-C card!

Michael

 

[rbo]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Hi morpheus_xx,

for me it doesn't work at all.

Just if I selectet the CI in DD-Tool (x64-21) there's no LiveTV available. No channel is found and no CAM-Menu is shown in TV-server.

My new logs were uploaded.

Ciao
rbo.

 

[sukceso]

I have a problem with the Cine S2 using the latest MP 1.2.0 SVN Drivers: I cannot start tv with the channel I used before. Please see here for details:
https://forum.team-mediaportal.com/mediaportal-1-2-0-alpha-536/cannot-start-same-tv-channel-second-time-90166/

I was refered to this thread. I asume that all patches mentioned in the first post are already part of MP 1.2.0. So it could either be a problem in MP itself or in the integration of the DD Cine S2 card. Any ideas?

BTW, I'm not using the CAM.

 

[morpheus_xx]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

I've just added a new build for all 1.1.2 users

 

[rbo]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

I've done the update from 1.1.1 to 1.1.2 and changed the TV-Server with the one from the first thread.

No changes for my problem.

As soon as I activate the CAM in DD-Tool, there's no LiveTV available.

Ciao
rbo.

 

[morpheus_xx]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

rbo: there seems to be a bit more wrong with your setup:

1)

2010-11-30 17:35:42.330831 [TVService(5)]: Controller: sorry, master/slave server setups are not supported. Since there is already another server in the db, we exit here.

2)

2010-11-30 17:34:19.855191 [(6)]: dvb:  Render [Capture]->[Digital Devices Common Interface 1]
...
2010-11-30 17:34:39.792026 [(6)]: dvb:  Render [Capture]->[Digital Devices Common Interface 1] failed

for issue 1) I suggest a re-creation of the TvServer DB. This is a very strange message.

for 2): the 20 second delay after enabling the CAM in settings tool is "quite normal", if you don't reboot your PC after the change.

So maybe it's enough to reboot, after this to recreate TvDB

 

[rbo]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Hi morpheus_xx,

thanks for looking after my logs!!!

I know that after a change in dd-tool I have to restart and I did it everytime.

Recreate the db means to build a new db or is there any parameter to start the setuptv.exe?