DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC) (2 Viewers)

[thb]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

DD writes that cascading of several CIs on one tuner does not work with MP.
The new driver works here without problems with two Duoflex C and one CI with a Alphacrypt light CAM.

 

[morpheus_xx]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

I'm already in contact with the developers. There will be some code parts to be changed, this takes a while

 

[MJGraf]

Just to confirm what thb said: New driver version works flawlessly with the DVB-C card, CAM and aplhacrypt classic (unity media).

 

[davitzen]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Hello!

I tested a new Server (MB: ASUS M4A785G HTPC, GC: onboard, 1xDuoflex CT + PCIE bridge + CAM Alphacrypt light 1.16).
I installed MP 1.1.2 and updated it with morpheus_xx's version. TV Card driver from DD are 2.0.0.23 X86 (I tested new version also) on the server runs WIN7 Prof. 32Bit. A full channel search crashes sometimes the server (this don't happens with my old TV Cards from Technisat on same PC). Another problem is, that TV server says channel is scrambled on EVERY pay tv HD channel! (I have an abo with SKY Germany) with normal SD, pay tv runs fine. (with DVB config CI is attached to both TV cards and DVB-C is selected)

All problems are also under Preview/ TV Server!

Does anybody have same problem or any solution?

David

 

[lhcomputer]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

I Use the Octobus with 2 Ci Interface (Sky and Hd Plus) and its work with the xx30 Driver and MP 1.1.2
Mapping from 2Ci Interface to both Tuner is not possible in Mediaportal, only One Tuner to One Ci Interface.

Center PC

 

[disaster123]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

I Use the Octobus with 2 Ci Interface (Sky and Hd Plus) and its work with the xx30 Driver and MP 1.1.2
Mapping from 2Ci Interface to both Tuner is not possible in Mediaportal, only One Tuner to One Ci Interface.

Center PC

But as far as i kow morpheus_xxx is working on this.

 

[andrees]

Re: AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Hello!

I tested a new Server (MB: ASUS M4A785G HTPC, GC: onboard, 1xDuoflex CT + PCIE bridge + CAM Alphacrypt light 1.16).
I installed MP 1.1.2 and updated it with morpheus_xx's version. TV Card driver from DD are 2.0.0.23 X86 (I tested new version also) on the server runs WIN7 Prof. 32Bit. A full channel search crashes sometimes the server (this don't happens with my old TV Cards from Technisat on same PC). Another problem is, that TV server says channel is scrambled on EVERY pay tv HD channel! (I have an abo with SKY Germany) with normal SD, pay tv runs fine. (with DVB config CI is attached to both TV cards and DVB-C is selected)

All problems are also under Preview/ TV Server!

Does anybody have same problem or any solution?

David

Same result here.

Got CAM and Card, but all channels says "scrambled".

Someone know why or how to correct this?
I have installed MP 1.1.2 and "Setup-TvEngine-1.1.2.exe.zip". I see Morpehus_xx have "DD_CAM_111_final.patch", but I do not know if this is a must or how to install this...?

I have:
1 stk: DuoFlex CT PCIe (http://shop.digital-...Products/091005)
1 stk: CI Modul für Cine S2 V5.5 und DuoFlex (http://shop.digital-...Products/092003)
1 stk: Slotblech DuoFlex- Bridge - Cine Modell K (http://shop.digital-...Products/092111)
+ CAM and Canal Digital program card.

 

[mylle]

Re: AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

I'm already in contact with the developers. There will be some code parts to be changed, this takes a while

Any update on this?

 

[leo808]

Hi morpheus_xx

I had everything working with dual tuners and one cam decoding both cards.
After uppgrading to 1.1.3 it is no longer working.
Is it possible to get an uppdated patch working with 1.1.3?

Thanks!

 

[morpheus_xx]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

I will prepare an updated version this weekend