DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC) (2 Viewers)

[hase23]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

Hello

There is a new driver of digital devices.

Driver Version 2.1.1.33

TV Karten Digital Devices - Digital Devices Distribution UG (haftungsbeschränkt)

Thanks

Sascha

 

[Nybbe67]

Hi guys

Hi all
finaly I've got my tuner back. Its a DD Duoflex CT and a DD CI module for cable TV in Sweden and have problems too. Both tuners are working but when I try to look on a scrambled channel I get "Unable to create/start graph". Free channels are working.

I have collected my TV server logs and attached them here. Before I cleaned out the logs so it will only contain new info for theese steps:

• Start Mediaportal TV Server config
• Selected Manual Control
• Groupt All channel
• DVBC Tuner 1
• Channel SVT1 (free)
• Start Timeshift
• Timeshifting is Working
• Manualy stoped after 5 sec
• Selected the DVBC Tuner 1
• Selects Channel TV3 (scrambled)
• Start Timeshift
• got message Unable to create/start graph

Then I collected the logfiles in the zipfile.

Then I made a new channel search

• Selected Manual Control
• Groupt All channel
• DVBC Tuner 1
• Channel SVT1 (free)
• Start Timeshift
• Timeshifting is Working
• Manualy stoped after 5 sec
• DVBC Tuner 1
• Channel TV3 (scrambled)
• Start Timeshift
• got Channel scrambled

The CAM is a Conax from SmartDTV and its working fine with my other card, a Floppy DTV/C.

Could someone have a look at my logfiles and hopefully a solution?

I have a new installed MP 1.1.2 with Morpheus fix installed and using the driver for the tuners version 2.0.0.23, on Windows 7 32 bit.
Best regards
Niklas

 

[morpheus_xx]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

your logs are a bit "too clean" , which means they are missing the tvserver startup, where the graph is built.

I had some issue with wrong channel scan results some time before. Can you verify that the tuning details for the non working channel are correct? (i.e. compare freq, symrate, pmt pid with other tv software). My issue was a mix of current tvlibrary with a non matching tswriter.

One thing you can try is to recreated the tv db (run from command line: setuptv -c), then change the db schema name. this way the setup creates a new schema.

 

[Nybbe67]

Thansk Morpheus for your time.

New test:
I stoped the TV service, clean the logs, restarted the TV service and made the same procedure again.

• Selected SVT1 (free channel) timeshifting for 5 seconds then manually stoped.
• Selected TV3 (scrambled) and get "channel is scrambled", not the "could not start/create graph"
• Then I collected the logs, see attached file.

Then I tried to recreate the schema as you suggested, a new channel scan and the same procedure with the same result, "the channel is scrambled"

 

[andrees]

Thansk Morpheus for your time.

New test:
I stoped the TV service, clean the logs, restarted the TV service and made the same procedure again.

• Selected SVT1 (free channel) timeshifting for 5 seconds then manually stoped.
• Selected TV3 (scrambled) and get "channel is scrambled", not the "could not start/create graph"
• Then I collected the logs, see attached file.

Then I tried to recreate the schema as you suggested, a new channel scan and the same procedure with the same result, "the channel is scrambled"

HW:
DuoFlex CT PCIe
CI Modul für Cine S2 V5.5 und DuoFlex
Strong Pairing CAM (Home: Strong Digital TV)
Canal Digital Card (Canal Digital: HDTV og digital-tv via parabol, kabel-nett og fiber-nett. Bredbånd og telefonitjenester. - Canal Digital NO)

Running:
Windows 7 x86
DigitalDevices-DVB-Driver-2.1.1.33-x86.msi
Mediaportal 1.1.2
Setup-TvEngine-1.1.2.exe.zip (morpheus_xx)

CI enabled in DD tool and Mediaportal.
Can open CI menu from MP TV Server Configuration.

Successfully searching and finding all channels.
But when I try to preview scrambled channels from TV Server Configuration i got "Preview failed:ChannelIsScrambled"

Anyone got DVB-C to work?

 

[morpheus_xx]

AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

andrees: yes, for me the DVB-C solution works well.

Nybbe67: can you test what happens if you do the same procedure (stop tvservice, clear logs, start it) but start with a scrambled channel first? same error?

 

[andrees]

HW:
DuoFlex CT PCIe
CI Modul für Cine S2 V5.5 und DuoFlex
Strong Pairing CAM (Home: Strong Digital TV)
Canal Digital Card (Canal Digital: HDTV og digital-tv via parabol, kabel-nett og fiber-nett. Bredbånd og telefonitjenester. - Canal Digital NO)

Running:
Windows 7 x86
DigitalDevices-DVB-Driver-2.1.1.33-x86.msi
Mediaportal 1.1.2
Setup-TvEngine-1.1.2.exe.zip (morpheus_xx)

CI enabled in DD tool and Mediaportal.
Can open CI menu from MP TV Server Configuration.

Successfully searching and finding all channels.
But when I try to preview scrambled channels from TV Server Configuration i got "Preview failed:ChannelIsScrambled"

Anyone got DVB-C to work?

I have attached log files.
Morpheus, can you have a look?

 

[cfforce]

Just recieved my DD-Octo device (DVB-S2), and worked out-of the box with MP1.1.3, driver: 2.1.1.33-x64.
Using Diseqc and HD channels. No CI interface tho.. (MD*)

 

[Nybbe67]

Re: AW: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)

@Nybbe67: can you test what happens if you do the same procedure (stop tvservice, clear logs, start it) but start with a scrambled channel first? same error?

Morpheus, new tests again.

• Stoped tvservice
• Cleaned logfiles
• Start tv service
• Selected TV3 (scrambled) and get "channel is scrambled again.
• Collected the logfiles, see attached file.

 

[Gump]

Can anyone confirm that Cine-S2 and CAM are running under MePo 1.1.3 with latest DD Driver .33?
I didn't get my setup to work.

Thanks.