DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC) (1 Viewer)
- Thread starter morpheus_xx
- Start date
Germany
Re: AW: Re: DigitalDevices Dual DVB-S2 Testing (CAM/DiSEqC)
Thanks, Darkroom, I will try it.
Regards
Niklas
Thanks, Darkroom, I will try it.
Regards
Niklas
i agree with darkroom - try to delete this channel and do rescan again
Its working! thanks guys.
recently replaced my old tv-cards with on digital devices cine s2 v.5.5 + CI (with Mascom Cryptoworks CAM)... i aplied the patch from the first post and yeah, first test seem to look good, but now after a bit of testing i have found at least one problem...
i have pay-tv (orf) and therefore have mapped the ci to both tuners of the dd-card... now i do the following in setuptv under manual control:
1. tune to ORF1 HD (encrypted channel) ... tuner 1, tunes the channel and it gets un-encrypted by the ci (tvserver states scrambled=no)
2. tune to ATV (encrypted channel on other transponder than orf1hd) .. tuner 2, tunes channel, gets un-encrypted by the ci (tvserver states scrambled=no)
3. tune to ORF2 HD (encrypted channel on same transponder with ORF1 HD) ... tuner 1 tunes channel and gets un-encryped by the ci (tvserver stated scrambled=no) BUT exactly after this, the scrambled status of the channel ORF1 HD changes from NO to YES
and this is exactly the problem, i even tried to set a cam limit to 1 but this does not help (seems to be a bug in mediaportal according to the forums) ..
...but now my question is: is is not possible to decrypt 2 channels on the same transponder with the digitaldevices card (this was even working with my old technotrend s2-3200)? or is it a bug in tvserver?
i use the latest drivers from dd-website (see my sysinfo for details)
logs of the described workflow are attached...
any help is welcome
i have pay-tv (orf) and therefore have mapped the ci to both tuners of the dd-card... now i do the following in setuptv under manual control:
1. tune to ORF1 HD (encrypted channel) ... tuner 1, tunes the channel and it gets un-encrypted by the ci (tvserver states scrambled=no)
2. tune to ATV (encrypted channel on other transponder than orf1hd) .. tuner 2, tunes channel, gets un-encrypted by the ci (tvserver states scrambled=no)
3. tune to ORF2 HD (encrypted channel on same transponder with ORF1 HD) ... tuner 1 tunes channel and gets un-encryped by the ci (tvserver stated scrambled=no) BUT exactly after this, the scrambled status of the channel ORF1 HD changes from NO to YES
and this is exactly the problem, i even tried to set a cam limit to 1 but this does not help (seems to be a bug in mediaportal according to the forums) ..
...but now my question is: is is not possible to decrypt 2 channels on the same transponder with the digitaldevices card (this was even working with my old technotrend s2-3200)? or is it a bug in tvserver?
i use the latest drivers from dd-website (see my sysinfo for details)
logs of the described workflow are attached...
any help is welcome
strange, multi-tuner-decrypting is working but no multi-transponder-decrypt... sad to hear that, so it's a good card but still not the perfect card... but thanks for the answer
...and i hope the problem with cam-limit-not-working is fixed in the upcoming beta...
...and i hope the problem with cam-limit-not-working is fixed in the upcoming beta...
I have tried to follow all the good advice that can be found here on this forum, but I can't get the system to work.
It mostly works, all channels are found and I can run the preview of coded and uncoded channels.
Problems:
1) Can not decoded two channels simultaneously.
2) EPG problems Norway.
Hardware:
- ASUS P8H67 LE-M, Intel I5 2500K, 8GB RAM
- Digital Devices DuoFlex CT PCIe
- CI Interface for Cine S2 v5.5 and DuoFlex
- Smit CONAX CAM
Software / drivers:
- Windows 7 X64
- Media Portal 1.1.3
- Digital devices, DVB-Driver-2.1.1.33-x64.msi
What I have done:
- Installed Windows 7 X64
- Installed all drivers for my motherboard
- Installed all updates for Windows 7
- Installed "digital devices, DVB-Driver-2.1.1.33-x64.msi"
- Activate both DVB-C tuners in DD-tools
- Enabled CI for both tuners in DD-tools
- Installed "Media Portal 1.1.3"
- Installed "morpheus_xx Setup TvEngine-1.1.3.exe"
- Runed "TV-Server Configuration" --> settings for both DVBC cards: CAM enabled
- Scanned for channels, all channels found
- preview of channels working (separately).
- In DD-tool I can access the CAM Menu.
- In "TV-Server Configuration" i can access the CAM Menu, but only for one tuner for each time i run "TV-Server Configuration".
I can access the CAM menu for tuner 1 or 2. To view CAM Menu for the other tuner, I need to close "TV-Server Configuration" and restart it. Then I can see the CAM menu for the other.
See attached logfiles:
I cleaned log files and then started Mediaportal and channel TV3 on comuter 1. Then I started Mediaportal and channel Eurosport on comuter 2. When Eurosport started on computer 2, TV3 stopped on computer 1.
Status:
View one coded channel and one open channel - ok
View two coded channels (simultaneously) - failed
Is there anything I can do to get the system working?
Plz help...
It mostly works, all channels are found and I can run the preview of coded and uncoded channels.
Problems:
1) Can not decoded two channels simultaneously.
2) EPG problems Norway.
Hardware:
- ASUS P8H67 LE-M, Intel I5 2500K, 8GB RAM
- Digital Devices DuoFlex CT PCIe
- CI Interface for Cine S2 v5.5 and DuoFlex
- Smit CONAX CAM
Software / drivers:
- Windows 7 X64
- Media Portal 1.1.3
- Digital devices, DVB-Driver-2.1.1.33-x64.msi
What I have done:
- Installed Windows 7 X64
- Installed all drivers for my motherboard
- Installed all updates for Windows 7
- Installed "digital devices, DVB-Driver-2.1.1.33-x64.msi"
- Activate both DVB-C tuners in DD-tools
- Enabled CI for both tuners in DD-tools
- Installed "Media Portal 1.1.3"
- Installed "morpheus_xx Setup TvEngine-1.1.3.exe"
- Runed "TV-Server Configuration" --> settings for both DVBC cards: CAM enabled
- Scanned for channels, all channels found
- preview of channels working (separately).
- In DD-tool I can access the CAM Menu.
- In "TV-Server Configuration" i can access the CAM Menu, but only for one tuner for each time i run "TV-Server Configuration".
I can access the CAM menu for tuner 1 or 2. To view CAM Menu for the other tuner, I need to close "TV-Server Configuration" and restart it. Then I can see the CAM menu for the other.
See attached logfiles:
I cleaned log files and then started Mediaportal and channel TV3 on comuter 1. Then I started Mediaportal and channel Eurosport on comuter 2. When Eurosport started on computer 2, TV3 stopped on computer 1.
Status:
View one coded channel and one open channel - ok
View two coded channels (simultaneously) - failed
Is there anything I can do to get the system working?
Plz help...
Hi Guys!
Long time not seen here
I got very wired experience with following:
Zotac ION-ITX-T, 4GB RAM
DD Cine S2 5.5 with DD CI - driver 2.1.1.33
Windows 7 Professional x64 SP1
MediaPortal 1.1.3
But first, I had the CI NOT installed and everything worked well (channel scan, watching FTA, ...)
Then I installed the CI, installed Morpheus patch, enabled the CI for both tuners in DD Config and in TV Configuration.
After that the Pay-TV Channels worked immediately (ORF and a small Sky-Package - A02 card)
I did some channel hops, restartet the box several times and really everything worked.
Then I switched from HDMI-Sound to analog output (which hopefully has nothing to do with TV Service), but since then nothing works anymore, not even a channel scan and I get a "no PMT found" in Logs every time I try to tune a channel.
After that I tried reinstall Morpheus Patch, every DD Driver I found on the net, MP 1.1.0 to 1.1.3, MP 1.2a, MP 1.2b and of course every combination of those.
NO combination worked - and this is what makes me think that the problem may be somewhere else, because I definitely watched Pay-TV with specified box for some hours.
Now I do a clean install on the box, trying to reproduce the issue.
If someone has a suggestion on what is going wrong here or has an idea what to try/test, then please leave a comment.
I will report here as I have news for you.
To clarify some questions you may have: CAM Menu is always working in DD Config and TV Configuration, I use alphacrypt CAM with A02 Sky(Premiere)/ORF card.
"no PMT found" is the only error I get in the logs, but if you wish I can post complete logs.
Another question to Morpheus: Is your patch already compiled into the official 1.1.3 release? I compared official TV-Server 1.1.3 with your attached TV-Server 1.1.3 in first post here but couldn't find a difference on byte-level... ?!?
So, read you soon
Yours, belcom.
Long time not seen here
I got very wired experience with following:
Zotac ION-ITX-T, 4GB RAM
DD Cine S2 5.5 with DD CI - driver 2.1.1.33
Windows 7 Professional x64 SP1
MediaPortal 1.1.3
But first, I had the CI NOT installed and everything worked well (channel scan, watching FTA, ...)
Then I installed the CI, installed Morpheus patch, enabled the CI for both tuners in DD Config and in TV Configuration.
After that the Pay-TV Channels worked immediately (ORF and a small Sky-Package - A02 card)
I did some channel hops, restartet the box several times and really everything worked.
Then I switched from HDMI-Sound to analog output (which hopefully has nothing to do with TV Service), but since then nothing works anymore, not even a channel scan and I get a "no PMT found" in Logs every time I try to tune a channel.
After that I tried reinstall Morpheus Patch, every DD Driver I found on the net, MP 1.1.0 to 1.1.3, MP 1.2a, MP 1.2b and of course every combination of those.
NO combination worked - and this is what makes me think that the problem may be somewhere else, because I definitely watched Pay-TV with specified box for some hours.
Now I do a clean install on the box, trying to reproduce the issue.
If someone has a suggestion on what is going wrong here or has an idea what to try/test, then please leave a comment.
I will report here as I have news for you.
To clarify some questions you may have: CAM Menu is always working in DD Config and TV Configuration, I use alphacrypt CAM with A02 Sky(Premiere)/ORF card.
"no PMT found" is the only error I get in the logs, but if you wish I can post complete logs.
Another question to Morpheus: Is your patch already compiled into the official 1.1.3 release? I compared official TV-Server 1.1.3 with your attached TV-Server 1.1.3 in first post here but couldn't find a difference on byte-level... ?!?
So, read you soon
Yours, belcom.