Reply to thread

Message

Ok, that's weird... Yesterday I changed just the color correction in de sketch and uploaded it. Hardware didn't change.
But nothing is happening again. What is is happening is that is connecting to the WIFI.
Restarted hyperion, but nothing is happening again.... Very frustrating.

Do I need some special router settings? I don't quite understand the multicast protocol. My home network is on 192.168.2.***
And the multicast is on 239.15.18.2 Set on Hyperion and the ESP.

Maybe a stupid question, but don't I need a 'Bridge' device like Hue?

Is the a way I can see Hyperion spits out the data for the ESPlight?

EDIT:
I've used the windows Color control app for testing the atmoOrb. The light is responding instantly, so the hardware and sketch on the ESP are ok.
There must be a problem with the RBPi of hyperion.config.json.
While I was trying this, I had connection for a short while; I was able to play effects and change colors by using the Hyperion App.
But it was not grabbing colors from my screen. Screen grabber was not in the config file at that time, so that make's sense. After I added it in again, no lights at all with hyperion.
But, still responding to the windows Color control App.

I use two configs: 1 for my backlight, directly connected to the RBPi with WS2801 leds and the other config for the Atmolight.
I Stopped the hyperion service and tried to just start the atmolight config. But that didn't worked out as well.
So frustrating, it's so random.... When it's working, I don't know why it's working and vice versa.
The RBPi is connected by LAN, btw.

Someone some thoughts?

<blockquote data-quote="daaf84" data-source="post: 1197988" data-attributes="member: 160053">Ok, that's weird... Yesterday I changed just the color correction in de sketch and uploaded it. Hardware didn't change.But nothing is happening again. What is is happening is that is connecting to the WIFI.Restarted hyperion, but nothing is happening again.... Very frustrating.Do I need some special router settings? I don't quite understand the multicast protocol. My home network is on 192.168.2.***And the multicast is on 239.15.18.2 Set on Hyperion and the ESP.Maybe a stupid question, but don't I need a 'Bridge' device like Hue?Is the a way I can see Hyperion spits out the data for the ESPlight?EDIT:I've used the windows Color control app for testing the atmoOrb. The light is responding instantly, so the hardware and sketch on the ESP are ok.There must be a problem with the RBPi of hyperion.config.json.While I was trying this, I had connection for a short while; I was able to play effects and change colors by using the Hyperion App.But it was not grabbing colors from my screen. Screen grabber was not in the config file at that time, so that make's sense. After I added it in again, no lights at all with hyperion. But, still responding to the windows Color control App.I use two configs: 1 for my backlight, directly connected to the RBPi with WS2801 leds and the other config for the Atmolight.I Stopped the hyperion service and tried to just start the atmolight config. But that didn't worked out as well.So frustrating, it's so random.... When it's working, I don't know why it's working and vice versa. The RBPi is connected by LAN, btw.Someone some thoughts?</blockquote>

[QUOTE="daaf84, post: 1197988, member: 160053"] Ok, that's weird... Yesterday I changed just the color correction in de sketch and uploaded it. Hardware didn't change. But nothing is happening again. What is is happening is that is connecting to the WIFI. Restarted hyperion, but nothing is happening again.... Very frustrating. Do I need some special router settings? I don't quite understand the multicast protocol. My home network is on 192.168.2.*** And the multicast is on 239.15.18.2 Set on Hyperion and the ESP. Maybe a stupid question, but don't I need a 'Bridge' device like Hue? Is the a way I can see Hyperion spits out the data for the ESPlight? EDIT: I've used the windows Color control app for testing the atmoOrb. The light is responding instantly, so the hardware and sketch on the ESP are ok. There must be a problem with the RBPi of hyperion.config.json. While I was trying this, I had connection for a short while; I was able to play effects and change colors by using the Hyperion App. But it was not grabbing colors from my screen. Screen grabber was not in the config file at that time, so that make's sense. After I added it in again, no lights at all with hyperion. But, still responding to the windows Color control App. I use two configs: 1 for my backlight, directly connected to the RBPi with WS2801 leds and the other config for the Atmolight. I Stopped the hyperion service and tried to just start the atmolight config. But that didn't worked out as well. So frustrating, it's so random.... When it's working, I don't know why it's working and vice versa. The RBPi is connected by LAN, btw. Someone some thoughts? [/QUOTE]