DVB-IP MediaPortal IPTV Source Filter (1 Viewer)

[azzuro]

Hi @georgius
i being test MP 1.4 with your files in 1st post.
I use FreeBox as French provider, scann working, display channel working, but i don't have sound (only very small time <1s sound.)

 

[EdG]

Hi @georgius
i being test MP 1.4 with your files in 1st post.
I use FreeBox as French provider, scann working, display channel working, but i don't have sound (only very small time <1s sound.)

Hello,

I had the same problem and try to parse freebox m3u file. I keep only url with "sd" at the end (because cannot get sound with "ld" url and "hd" does not work due to a too low ISP bitrate.

I join in attached file my freebox m3u file for TV that I am using, not all url are working but some are working good.

However, I cannot get radio streams from free correctly because free use mutiple tracks in a same rstp stream (1 url and several tracks, 1 tracks by radios).

How did you get MP 1.4 ? The official release is MP 1.3.0

 

[azzuro]

I had the same problem and try to parse freebox m3u file. I keep only url with "sd" at the end (because cannot get sound with "ld" url and "hd" does not work due to a too low ISP bitrate.

i can look without problem HD channel (10 dB of attenuation)
For a same channel France 4 we have
- France 4 (bas débit) slow flow (Codec video : h264 / Audio : AAC ) = BUG
- France 4 (Codec video : H264 / Audio : MPEG2) = OK
- France 4 HD (Codec Video : H264 / Audio : AAC ) = BUG

 

[mm1352000]

I had the same problem and try to parse freebox m3u file. I keep only url with "sd" at the end (because cannot get sound with "ld" url and "hd" does not work due to a too low ISP bitrate.

i can look without problem HD channel (10 dB of attenuation)
For a same channel France 4 we have
- France 4 (bas débit) slow flow (Codec video : h264 / Audio : AAC ) = BUG
- France 4 (Codec video : H264 / Audio : MPEG2) = OK
- France 4 HD (Codec Video : H264 / Audio : AAC ) = BUG

Have you tried different AAC decoders and different audio renderer?
Just thinking this could be a codec compatibility issue, or an issue with the MP audio renderer.
georgius can confirm, but I suspect the DVB-IP filter would probably have no influence on whether the audio works or not.

At least you can see that the audio streams are present at TsWriter:

04-05-2013 08:08:15.836 pcr pid: 0
04-05-2013 08:08:15.838 pmt pid: 0
04-05-2013 08:08:15.839 pmtgrabber: PMT pids changed to:
04-05-2013 08:08:15.840 pcr pid: 65
04-05-2013 08:08:15.841 pmt pid: 42
04-05-2013 08:08:15.843 video pid: 65 type: H
04-05-2013 08:08:15.844 audio pid: c9 language: fra type: A
04-05-2013 08:08:15.845 audio pid: ca language: qaa type: A
04-05-2013 08:08:15.846 audio pid: cb language: qad type: A

...and the TV library:

[2013-05-04 08:08:15,887] [Log ] [5 ] [INFO ] - subch:0 pid:65 pcr
[2013-05-04 08:08:15,887] [Log ] [5 ] [INFO ] - subch:0 pid:42 pmt
[2013-05-04 08:08:15,888] [Log ] [5 ] [INFO ] - subch:0 pid:65 video type:H.264
[2013-05-04 08:08:15,888] [Log ] [5 ] [INFO ] - subch:0 map pid:65 video type:H.264
[2013-05-04 08:08:15,892] [Log ] [5 ] [INFO ] - subch:0 pid:C9 audio lang:fra type:AAC
[2013-05-04 08:08:15,892] [Log ] [5 ] [INFO ] - subch:0 map pid:C9 audio lang:fra type:AAC
[2013-05-04 08:08:15,895] [Log ] [5 ] [INFO ] - subch:0 pid:CA audio lang:qaa type:AAC
[2013-05-04 08:08:15,895] [Log ] [5 ] [INFO ] - subch:0 pid:CB audio lang:qad type:AAC
[2013-05-04 08:08:15,895] [Log ] [5 ] [INFO ] - subch:0 pid:12D teletext type:6
[2013-05-04 08:08:15,895] [Log ] [5 ] [INFO ] - subch:0 map pid:12D teletext type:6
[2013-05-04 08:08:15,895] [Log ] [5 ] [DEBUG] - OnPMTReceived: MDAPI disabled. Possible reasons are _mdplugs=null or provider not listed
[2013-05-04 08:08:15,895] [Log ] [5 ] [INFO ] - subch:0 stop tif
[2013-05-04 08:08:15,895] [Log ] [5 ] [DEBUG] - WaitForPmt: PMT handling took 0,0430024 seconds.
[2013-05-04 08:08:15,895] [Log ] [5 ] [INFO ] - dvbip: tune: Graph running. Returning TvLibrary.Implementations.DVB.TvDvbChannel
[2013-05-04 08:08:15,899] [Log ] [5 ] [DEBUG] - card: Tuner locked: False
[2013-05-04 08:08:15,899] [Log ] [5 ] [INFO ] - **************************************************
[2013-05-04 08:08:15,900] [Log ] [5 ] [INFO ] - ***** SIGNAL LEVEL: 100, SIGNAL QUALITY: 100 *****
[2013-05-04 08:08:15,900] [Log ] [5 ] [INFO ] - **************************************************
[2013-05-04 08:08:15,900] [Log ] [5 ] [DEBUG] - card: tuned user: ROMAIN-PC subchannel: 0
[2013-05-04 08:08:15,901] [Log ] [5 ] [INFO ] - user:ROMAIN-PC add
[2013-05-04 08:08:15,901] [Log ] [5 ] [INFO ] - card2:ROMAIN-PC 1 0
[2013-05-04 08:08:15,903] [Log ] [5 ] [INFO ] - Controller: delete timeshift files C:\ProgramData\Team MediaPortal\MediaPortal TV Server\timeshiftbuffer\live1-0.ts
[2013-05-04 08:08:15,906] [Log ] [5 ] [INFO ] - Controller: epg stop
[2013-05-04 08:08:15,909] [Log ] [5 ] [INFO ] - card: StartTimeShifting 1 C:\ProgramData\Team MediaPortal\MediaPortal TV Server\timeshiftbuffer\live1-0.ts
[2013-05-04 08:08:15,910] [Log ] [5 ] [INFO ] - card: CAM enabled : False
[2013-05-04 08:08:15,912] [Log ] [5 ] [INFO ] - subch:0 SetTimeShiftFileName:C:\ProgramData\Team MediaPortal\MediaPortal TV Server\timeshiftbuffer\live1-0.ts
[2013-05-04 08:08:15,912] [Log ] [5 ] [INFO ] - Set video / audio observer
[2013-05-04 08:08:15,917] [Log ] [5 ] [INFO ] - subch:0 SetTimeShiftFileName fill in pids
[2013-05-04 08:08:15,931] [Log ] [5 ] [INFO ] - subch:0-0 tswriter StartTimeshifting...
[2013-05-04 08:08:15,936] [Log ] [5 ] [INFO ] - card: WaitForFile - waiting _eventAudio & _eventVideo
[2013-05-04 08:08:15,995] [Log ] [15 ] [INFO ] - PID seen - type = Video
[2013-05-04 08:08:15,996] [Log ] [15 ] [INFO ] - audioVideoEventHandler Video
[2013-05-04 08:08:16,102] [Log ] [15 ] [INFO ] - PID seen - type = Audio
[2013-05-04 08:08:16,102] [Log ] [15 ] [INFO ] - audioVideoEventHandler Audio
[2013-05-04 08:08:16,102] [Log ] [5 ] [INFO ] - card: WaitForFile - video and audio are seen after 0,1660095 seconds

So again... I suggest to try different AAC decoders (Monogram, DivX, FFDShow) and different audio renderer (default DirectSound).

 

[azzuro]

Have you tried different AAC decoders and different audio renderer?

So is Codec issue
LAV audio : BUG
Monogram : BUG
FFDSHOW : not available for AAC
DIVX Codex : WORK

Use MPAR has not effect compared to default directshow.
missing to install Divx codec

 

[mm1352000]

Maybe worth to report to @nevcairiel and provide a sample recording.

 

[FreakyJ]

better tell @tourettes he has contact to nev as far as I know, nev was the last time active in 2011 here...

 

[georgius]

Hi

Sorry i had a MP crass and had to re install.
I had MDA** installed, but that tried to descramble the stream, so I reinstalled without, and the switchtime went down to about 3-4 sec.
this is the same as WMC
i don't much about streams, but would it be faster to use another type.
/BR shummi

From TV server log it seems that switching channel takes approx. 3 seconds, but one second is waiting for response of HTTP server.

 

[georgius]

Hello,
Is there a possible way to select audio track in a rtsp stream ?

No, it's not possible, IPTV source filter doesn't split source stream to separate tracks. For adding this feature I need some testing TS stream. I write you private message with necessary information.

 

[georgius]

I can confirm that IPTV filter doesn't have anything with sound issue. Everything that comes from stream is sent to other filters in graph. I also think that this is codec issue. IPTV filter has ability to dump raw TS file (in TV server log folder, file name will be mpiptv_output_dump_{GUID}.ts), just change in MPIPTVSource.ini option DumpRawTS to 1.