Reply to thread

Message

<blockquote data-quote="w8andc" data-source="post: 1299788" data-attributes="member: 15729">Try to revive old thread.TV-server Mediaportal 1 (1.34 version) has worked very good for some time.But recently same behavior is going on. Don't have a clue what caused it.I only use 1 DVB-S2 tuner card: TBS 6982. This is indeed a 2 tuner card. TV-server installed on a Windows 11 x64 system.In section&nbsp; &quot;manual control&quot; of TV server configuration 1 tuner stays red and subchannel count is increasing.This is in the line of the description above in this thread.Probably caused by using 2 same tuner cards or twin tuner in combination with Windows system?Stopping TV-service and starting again does solve the problem.This should only be a temporary solution.Further investigation:<ul>
<li data-xf-list-type="ul">Seems only 1 tuner &quot;Tuner A&quot; from TBS card is effected. By using only &quot;Tuner B&quot; the problem is gone.</li>
</ul></blockquote>

[QUOTE="w8andc, post: 1299788, member: 15729"] Try to revive old thread. TV-server Mediaportal 1 (1.34 version) has worked very good for some time. But recently same behavior is going on. Don't have a clue what caused it. I only use 1 DVB-S2 tuner card: TBS 6982. This is indeed a 2 tuner card. TV-server installed on a Windows 11 x64 system. In section "manual control" of TV server configuration 1 tuner stays red and subchannel count is increasing. This is in the line of the description above in this thread. Probably caused by using [U]2 same tuner cards or twin tuner[/U] in combination with [U]Windows system[/U]? Stopping TV-service and starting again does solve the problem. This should only be a temporary solution. Further investigation: [LIST] [*]Seems only 1 tuner "Tuner A" from TBS card is effected. By using only "Tuner B" the problem is gone. [/LIST] [/QUOTE]

Verification