ENLTV-FM Hell (1 Viewer)

[Chaoticblankness]

I'm not alone out here..! *dances*

Thanks for the info cthos and thanks goes out to mzemina, jawbroken, and dman_lfc for taking the time to try and help. I do appreciate it.

Cthos I'll try to stay in contact with you in regards to this via e-mail, if that's all right with you..?

 

[cthos]

Screenshot

By the way: http://www.cthos.tengun.net/ENLTV.JPG

That is a screenshot of what i've got so far.

 

[cthos]

No Problem

Sure. You can get ahold of me at Daginus@gmail.com

 

[cthos]

Followup

Just posting a follow up, incase anyone else decided to go the hard route and try to get this piece of junk working.

So, I've got the card recognized in media portal, but the graph won't seem to work (well, yeah, I expected that but I'm not sure what exactly is going on here.)

Here is what I know so far: The Intervideo Codec is installed and configured in media portal.

Graphing the audio has been a pain... and i still can't get it to work right, so I have omitted the linkings in the carddefinitions.xml file. Note: The analog audio pin from PhTVTune doesn't seem to want to connect to anything. Perhaps I'm missing something.

This is what i've got for the connection settings thusfar:

<capturecard commercialname="Encore ENLTV-FM" capturename="713x_3 TV Card Capture" devid="ven_1131&amp;dev_7130&amp;subsys_23411131&amp;rev_0">
<capabilities tv="true" radio="true" mpeg2="true" mce="false" sw="false" bda="false"/>
<tv>
interface cat="mux" video="" audio="" mpeg2="0"/>
<filters>
<filter cat="tvtuner" name="PhTVTune" checkdevice="true"/>
<filter cat="crossbar" name="713x_3 TV Card Crossbar" checkdevice="true"/>
<filter cat="capture" name="713x_3 TV Card Capture" checkdevice="true"/>
<filter cat="videncoder" name="%videoencoder%" checkdevice="false"/>
<filter cat="audencoder" name="%audioencoder%" checkdevice="false"/>
</ filter cat="mux" name="%mpegmux%" checkdevice="false"/>
</filters>
<connections>
<connection sourcefilter="tvtuner" sourcepin="0" sinkfilter="crossbar" sinkpin="%tvtuner%"/>
<connection sourcefilter="crossbar" sourcepin="0" sinkfilter="capture" sinkpin="0"/>
<connection sourcefilter="capture" sourcepin="0" sinkfilter="videncoder" sinkpin="0"/>
<connection sourcefilter="videncoder" sourcepin="0" sinkfilter="mux" sinkpin="0"/>
</connections>
</tv>
</capturecard>

This is a screenshot of what I've got in graphedit:

And here is the error output from the log (relevant sections only):

8/5/2006 3:08:12 PM Load settings done
8/5/2006 3:08:20 PM device:713x_3 TV Card Capture iddevicenp:\\?\pci#ven_1131&dev_7130&subsys_23411131&rev_01#4&dc268a3&0&3080#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global
8/5/2006 3:08:20 PM 8/5/2006 3:08:20 PM TVCapture.CreateGraph() Card:1
8/5/2006 3:08:20 PM 1 vmr9:ctor()
8/5/2006 3:08:20 PM 1 vmr9:ctor() DX9Device=null
8/5/2006 3:08:20 PM 1 vmr9:ctor() _renderFrame=null
8/5/2006 3:08:20 PM 1 vmr9:ctor() done:False
8/5/2006 3:08:20 PM SinkGraphEx:CreateGraph() IN
8/5/2006 3:08:20 PM keyYSTEM\CurrentControlSet\Enum\PCI\ven_1131&dev_7130&subsys_23411131&rev_01\4&dc268a3&0&3080
8/5/2006 3:08:20 PM LoadDefs for device at PCI bus 4, device 6
8/5/2006 3:08:20 PM keyYSTEM\CurrentControlSet\Enum\PCI\ven_1131&dev_7130&subsys_23411131&rev_01\4&dc268a3&0&3080
8/5/2006 3:08:20 PM defs loaded for device at PCI bus 4, device 6
8/5/2006 3:08:20 PM CaptureCard 713x_3 TV Card Capture NOT supported, no definitions found
8/5/2006 3:08:20 PM SinkGraphEx:card does not contain filters?
8/5/2006 3:08:20 PM TVCapture.DeleteGraph() Card:1
8/5/2006 3:08:21 PM TVCapture.CreateGraph() Card:1
8/5/2006 3:08:21 PM 1 vmr9:ctor()
8/5/2006 3:08:21 PM 1 vmr9:ctor() DX9Device=null
8/5/2006 3:08:21 PM 1 vmr9:ctor() _renderFrame=null
8/5/2006 3:08:22 PM 1 vmr9:ctor() done:False
8/5/2006 3:08:22 PM SinkGraphEx:CreateGraph() IN
8/5/2006 3:08:22 PM SinkGraphEx:card does not contain filters?
8/5/2006 3:08:22 PM TVCapture.DeleteGraph() Card:1
8/5/2006 3:08:22 PM TVCapture.CreateGraph() Card:1
8/5/2006 3:08:22 PM 1 vmr9:ctor()
8/5/2006 3:08:22 PM 1 vmr9:ctor() DX9Device=null
8/5/2006 3:08:22 PM 1 vmr9:ctor() _renderFrame=null
8/5/2006 3:08:22 PM 1 vmr9:ctor() done:False
8/5/2006 3:08:22 PM SinkGraphEx:CreateGraph() IN
8/5/2006 3:08:22 PM SinkGraphEx:card does not contain filters?
8/5/2006 3:08:22 PM TVCapture.DeleteGraph() Card:1


Any suggestions as to what I should do next (aside from junking the thing, of course)

 

[ssubo]

Has anyone made the Encore ENL TV-FM work?

If you had, what are the steps to configure it with TV3 engine?

Thanks a lot!

Ssubo

 

[ssubo]

Any luck with this card? I couldn't make it work with TV2 engine... Any ideas? It uses the Phillips SAA7131E / 02 / G chip...

Thanks,

Ssubo

 

[dido]

hi i have GIGABYTE Card that use the same chip SAA7131E please any lake any one