FireDTV-C problems error (FireDTV: failed 0x8007001F) (1 Viewer)

[iosub]

HI

I have some problems with my FireDTV-C (I have two) and Tv3.
error:

2008-03-04 09:12:55.734375 [13]: FireDTV: failed 0x8007001F
2008-03-04 09:12:55.734375 [13]: FireDTV:ResetCAM()



I have a T-REX 4.6 cam

This is my configuration
devices found: 2
Status for device 1
Model : FireDTV C/CI
GUID : 0x00128700360009EF
HW Ver.: 01.36.01
FW Ver.: 1.2.10 Build 43110
Driver : 4.8.0
Frontend Status:
Power Supply: 12.24V
1394 Bus: 11.88V
Frequency.: 754000 kHz, Sig.Str.: 100%, BER: 10
Locked : YES
CAM Module: PRED 3.65
Status for device 2
Model : FireDTV C/CI
GUID : 0x00128700360022FD
HW Ver.: 01.36.02
FW Ver.: 2.2.10 Build 43110
Driver : 4.8.0
Frontend Status:
Power Supply: 12.00V
1394 Bus: 11.76V
Frequency.: 0 kHz, Sig.Str.: 0%, BER: 16160
Locked : NO
CAM Module: PRED 3.65


I have test upgrading to Firmware 1.3 and 2.3 (depending on HW version) and also the Trex 4.6 firmware to Predasaurus 2.24.... I have change the Firewire Port and Buy I new card, change cables.. ect...
I have send also a report to digital-everywhere.. But They are not able to find a solution yet..
After the error the FireDTV stops working and FureDTVTools does not reconice the cards.. Given me this error
Status for device 1
Model : Error
GUID : 0x00128700360009EF
HW Ver.: 00.00.00
FW Ver.: 0.0.0 Build 0
Driver : 4.8.0
Frontend Status:
Frequency.: 0 kHz, Sig.Str.: 0%, BER: 0
Locked : NO
The only way to bringback the card is to remove the cam (trex) and put it back.. or (powerRecicle)

Is this a TV3 problem?? anyone using FireDTV with TRex is having problems??

Thanks for your help

I have attach the log files... the error ocurs at 9:12...

 

[tourettes]

"A device attached to the system is not functioning (0x8007001F)"

 

[infinite.loop]

simple test. try to use the TV-Application which is bundled with the firedtv.
does this work?

 

[iosub]

simple test. try to use the TV-Application which is bundled with the firedtv.
does this work?

Yes It does, also with Tv3.. but with tv3 stops sometimes after 1 hour other after 2 hours... It's doesn't stop always at the same time. But I get more error when I have both cards connect, with only one card gets longer to have problems...

Is your firedtv-c stable? what firmware of firedtv-c are you using? what cam?

I have this Probelms...

https://forum.team-mediaportal.com/...-issues-floppy-firedtv-firmware-1-2-0-a-9512/


Thank you

 

[infinite.loop]

simple test. try to use the TV-Application which is bundled with the firedtv.
does this work?

Yes It does, also with Tv3.. but with tv3 stops sometimes after 1 hour other after 2 hours... It's doesn't stop always at the same time. But I get more error when I have both cards connect, with only one card gets longer to have problems...

and you have the same problem, that it suddenly stops working, with bundled TV-application from digital everywhere?

Is your firedtv-c stable? what firmware of firedtv-c are you using? what cam?

hm.. i dont know why you think that i have the "c" version. because i dont.
i have one floppy-dtv-s (+AlphaCrypt CAM) and one floppy-dtv-S2

they are working without problems.

but tourette owns one floppy-dtv-c afaik.

I have this Probelms...

https://forum.team-mediaportal.com/...-issues-floppy-firedtv-firmware-1-2-0-a-9512/

this problem was caused 100% by bug(s) in the firmware of the cam.
firmwareupdate solded the issues back at that time.

 

[iosub]

First thanks for your help--

I have found the problem.. Is the convination of Trex card with FireDTV-C... this is a no gooooo.... I have changed the card to diablo and it working for more tha two days with no issues

Thanks!

 

[tourettes]

Good to hear that the issue is solved (and it was HW based as we thought )

 

[infinite.loop]

First thanks for your help--

I have found the problem.. Is the convination of Trex card with FireDTV-C... this is a no gooooo.... I have changed the card to diablo and it working for more tha two days with no issues

Thanks!

you should tell this digital-everywhere and the support of the Trex CAM.
maybe a firmwareupdate will cure this issue sooner or later.

 

[iosub]

First thanks for your help--

I have found the problem.. Is the convination of Trex card with FireDTV-C... this is a no gooooo.... I have changed the card to diablo and it working for more tha two days with no issues

Thanks!

you should tell this digital-everywhere and the support of the Trex CAM.
maybe a firmwareupdate will cure this issue sooner or later.

Yes, I have an open issue with DigitallEverywhere.. I will tell them monday.. Do you know the support address of "Trex" ??

Thanks!