Firefly X10 file missing, but file is present (1 Viewer)

RamonS

Portal Member
October 8, 2007
30
0
TV-Server Version: n/a
MediaPortal Version: 0.2.3.0 RC3 & SVN 16429
MediaPortal Skin: Blue Two
Windows Version: Windows XP SP2 64 bit
CPU Type: AMD Athlon 64 XS 5200+
HDD: 320 GB Seagate SATA RAID
Memory: 2 GB Corsair 6400
Motherboard: Asus M2N32SLI-Deluxe
Motherboard Chipset: nVidia nForce 570
Motherboard Bios: latest
Video Card: eVGA GF 7600GT 256MB PCIe 16x
Video Card Driver: latest nVidia drivers
Sound Card: onboard SoundMax HiDef
Sound Card AC3:
Sound Card Driver: latest
1. TV Card: Hauppauge HVR-1800
1. TV Card Type: ATSC/NTSC/QAM/FM
1. TV Card Driver: latest Hauppauge driver (CD 3.4d1)
MPEG2 Video Codec: MPV Decoder
MPEG2 Audio Codec: MPA Decoder
Satelite/CableTV Provider: TimeWarner / ATSC OTA
HTPC Case:
Cooling: 4x80mm, 1x120mm fans
Power Supply: Rosewell 500W
Remote: Snapstream Firefly X10 - R1000

Configuration: Remote > X 10
After clicking on Learn I get this error msg:
---------------------------
Mapping file missing
---------------------------
Can't locate mapping file Firefly X10.xml

Make sure it exists in /InputDeviceMappings/defaults
---------------------------
OK
---------------------------

Clicking OK opens Teach Firefly X10 Remote Control, clicking Start Learning gives JIT debug msg, see attached file.
Also, file 'Firefly X10.xml' is present in /InputDeviceMappings/defaults!
 

RamonS

Portal Member
October 8, 2007
30
0
Config.log file

Sorry, I always forget the log file on the first go, here it is.
 

vebis

Portal Member
August 10, 2007
6
0
Home Country
Germany Germany
I have the same problem, but with all options in this menu.
This error seems to be affecting only the Configuration, not Mediaportal itself.

TV-Server Version: SVN 16422
MediaPortal Version: 0.2.3.0 RC3 & SVN 16422
MediaPortal Skin: Blue Two
Windows Version: Windows XP SP2 32 bit
 

RamonS

Portal Member
October 8, 2007
30
0
Well, the problem is that some mappings are not correct (such as go left, go right) and that I for some reason get in menus two steps for one button press. I did get the other driver and installed it (I guess, the exe doesn't give any feedback as to what it does or doesn't do), but that did not help.
The more and more I dive into MP the more and more I get the impression that those are not beta releases, but pre-alpha...even without the SVN builds. That isn't meant as critique, but as an observation. I think it will take several more months before MP is worth looking at again. Back to square one....
 

diehard2

Retired Team Member
  • Premium Supporter
  • April 22, 2006
    518
    28
    Chicago
    Home Country
    United States of America United States of America
    Hi Ramon,

    This section of the code has been stable for months without complaints. The last time it was heavily reworked was almost a year ago. You can look through the forums. I will take a look at a new checkout of the svn and let you know if I see the problem.
     

    vebis

    Portal Member
    August 10, 2007
    6
    0
    Home Country
    Germany Germany
    It seems to be a path relation problem. I've done a clean install of mp on a fresh windows xp installation, when this behavior appeared.

    MP handles it correct and Configuration doesn't
     

    RamonS

    Portal Member
    October 8, 2007
    30
    0
    I agree with vebis as so far as that MP istelf apparently doesn't generate an error message when it comes to using the remote, but even MP is somewhat far away from accurately reacting to RC commands.
    Diehard2, all I can do is report this error. It very much looks as if Configuration assumes a path that is de facto not present, so the error message isn't wrong, but the code underneath is. Unfortunately, the error message does not provide the full path, which would give some more clues. I run MP on 64 bit XP and the folder for 32 bit apps is "Program Files (x86)", which is exactly where MP installed itself. So if the installer could figure out where to put the files I am sure Configuration ought to be able to. I am not a professional developer by any means, but even I found out that just assuming paths to be present is bad practice, especially when there is a way to check for the correct path. Interestingly enough, all other files that are used are found, read, and written to correctly. Which makes this even more bizarre as I assume that the paths to MP directory is determined once and then used whenever needed.
     

    diehard2

    Retired Team Member
  • Premium Supporter
  • April 22, 2006
    518
    28
    Chicago
    Home Country
    United States of America United States of America
    Hi, try svn 16446 or higher (will be out sometime tomorrow). If that doesn't work, please post your logs.
     

    RamonS

    Portal Member
    October 8, 2007
    30
    0
    I tried SVN 16460 and that one works fine. This is fixed!
     

    vebis

    Portal Member
    August 10, 2007
    6
    0
    Home Country
    Germany Germany
    I can confirme that it's working now. But another minor bug has opened.

    e.g. select the medion remote, click on "Learn"
    Click on "Mapping", leaving mapping with Ok oder Cancel(no matter for the bug appearance)
    Then I have all actions twice in the Learning Window.
    This is repeatable.

    Rev16460

    Should I open a new thread for this minor bug?
     

    Users who are viewing this thread

    Top Bottom