[no Bug] HTPC Client won't Sleep after upgrade to RC1 (1 Viewer)

[kjd01]

MediaPortal Version: 1.1.0 RC1
MediaPortal Skin: Monochrome
Windows Version: Vista SP1 32bit
CPU Type: Intel E5200 2.5GHz
HDD: Samsung 1TB & WDC 160GB
Memory: 4GB
Motherboard: ASUS KPL/C1600
Video Card: Nvidia GeForce 8400 GS
Video Card Driver: 8.16.11.9107
Sound Card: VIA Onboard Sound
Sound Card AC3: Optical
Sound Card Driver: 6.0.1.7400
1. TV Card: DigitalNow USB TinyTwin
1. TV Card Type: DVB-T
1. TV Card Driver: 8.6.24.1
2. TV Card: DigitalNow TinyTwin USB
2. TV Card Type: DVB-T
2. TV Card Driver: 8.6.24.1
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MPC-MPEG-2 Video Decoder
MPEG2 Audio Codec: MPC-MPA Decoder Filter
h.264 Video Codec: ffdshow Video Decoder
Satelite/CableTV Provider:
HTPC Case: Thermaltake Mozart
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:


Since upgrading to 1.1.0 RC1 my system will not automatically go into standby. This is a multiseat configuration which I only need the client to go into standby. If I use the remote to place the cleint to standby it works fine. But if the computer is left on the Home screen it will not go into standby. I configured the Power Scheduler to 5 minutes and have tried both ticking the only when on the Home Screen and unticking it. Neither works. This is required because my client is woken up by my WHS to perform backups at night and I would like it to go back to sleep. Logs are attached.

 

[arion_p]

Please post full system specs and logs (both server and client).

From your client logs it seems the PowerScheduler client cannot connect to the server but I do not know why without server logs / specs.

 

[kjd01]

Sorry I don't understand what the Server has to do with it. The server is not configured to go to standby it stays on all the time. All I want is the client to go to sleep which it is not doing.

 

[arion_p]

Since PowerScheduler client plugin cannot connect to its server counterpart on the server I need to see the server logs to see why (is the server listening, are ports blocked, did the server run into an error before responding etc).

 

[kjd01]

OK. Here are the Server Logs.

 

[arion_p]

Can you please enable PowerScheduler plugin on the server and just set Shutdown Mode to Stay On. This should solve your problem.

 

[kjd01]

When I get home from Work tonight I will give it a try and let you know how it went.

 

[kjd01]

I have tried what you stated and it still didn't work. I have attached the logs from the client. I have not attached any logs from the TV Server because there was nothing in them at all.

I noticed that it was trying to connect on a port 31457 so I turned off the firewall on the Server and the client, but it also made no difference. The log attached is with the firewalls turned off.

 

[arion_p]

Again, please post server logs to verify PowerScheduler Server plugin initialized correctly. If initialization on server is successful, then something else is blocking connection to the server.

 

[kjd01]

Here is the TVServer log. I started with the plugin off, then I turned in on, then I changed some settings in the plugin. I see nothing in the logs and this is the only log generated.