Reply to thread

Message

<blockquote data-quote="f-c0d3" data-source="post: 371088" data-attributes="member: 88112">Hi,i am using the Hauppauge HVR1300. I have added the radiostations manually in the TV-Server configuration. Automatic scanning is also not working. Stops at the first frequency (87.50 Mhz). But a manually setup does the trick. It took me some try and error in the configuration to select the right device mapping but finally its working.As the HVR-1300 is a hybrid-card you need to select the right tuner when adding a radio-station. But then you should be able to &quot;preview&quot; the radio-station in the TV-Server configuration. In my case a empty black window appears and the selected radio-station comes clearly out of my speakers. But i still have one problem:Edited radio-stations working fine in the server configuration, but not in the client-application. As describe above i can &quot;preview&quot; the configured radio-stations but in the client application when selecting the configured radio-station its not working. In my case i have the following setup:The HVR-1300 has 2 connectors. One for radio and one for tv. I have connected a DVB-T antenna to the tv-connector. Everything is working as expected. Which means i can record, view, switch channels and timeshift programs.The radio-connector is connected to cable and therefore i am using analog signals for radio. As described above i can click on preview in the tv-server setup and the selected channel is outputted to the speakers. But a selection in the client results in just nothing.Help would be very apprecated!Best RegardsThorstenPS: I am currently not at my HTPC. I will add logfiles from the client / server today when back at home.</blockquote>

[QUOTE="f-c0d3, post: 371088, member: 88112"] Hi, i am using the Hauppauge HVR1300. I have added the radiostations manually in the TV-Server configuration. Automatic scanning is also not working. Stops at the first frequency (87.50 Mhz). But a manually setup does the trick. It took me some try and error in the configuration to select the right device mapping but finally its working. As the HVR-1300 is a hybrid-card you need to select the right tuner when adding a radio-station. But then you should be able to "preview" the radio-station in the TV-Server configuration. In my case a empty black window appears and the selected radio-station comes clearly out of my speakers. But i still have one problem: Edited radio-stations working fine in the server configuration, but not in the client-application. As describe above i can "preview" the configured radio-stations but in the client application when selecting the configured radio-station its not working. In my case i have the following setup: The HVR-1300 has 2 connectors. One for radio and one for tv. I have connected a DVB-T antenna to the tv-connector. Everything is working as expected. Which means i can record, view, switch channels and timeshift programs. The radio-connector is connected to cable and therefore i am using analog signals for radio. As described above i can click on preview in the tv-server setup and the selected channel is outputted to the speakers. But a selection in the client results in just nothing. Help would be very apprecated! Best Regards Thorsten PS: I am currently not at my HTPC. I will add logfiles from the client / server today when back at home. [/QUOTE]

Verification