- August 9, 2007
- 70
- 3
- Home Country
-
Sweden
Few years ago I switched from TVEdia to Media Portal and stopped using DVB-C as my card wasn't supported by MP. During these years I managed my TV watching with combination of analogue card and DreamBox connected to MP, first through S-video and later through DVBSBridge. Few weeks ago I decided to give DVB-C a shot again and purchased TerraTec Cinergy C PCI HD and Dilog Conax 5.0 CAM. My forum and internet "survey" suggested that this was probably the best alternative that is currently available as Fire/FloppyDTV and TT 1500 cannot be find anymore...
Since then I spent numerous hours trying to get anything even remotely close to decent performance - without success. I've tried any possible combination of Windows XP, Windows 7, MP 1.0.2, MP 1.1.0 , SVN:s and even MP 0.2.3... The problem is always the same - non-FTA channels freeze after few minutes and log files show nothing unusual.
Now, I know that this is most likely not really MP problem (see below) but I'm really curious - and helpless right now. Is there any way to "tweak" DVB-C performance, especially in regards to CAM and pay channels? Is there any card and CAM combination that actually works rock-solid for DVB-C and particularly comhem (Sweden)?
What else have I tried... Well, to start with I've tried different media applications on Windows and freezing problem is always there. The "best" result is obtained with Terratec's own Home Cinema application which at least "unfreezes" the picture after 20-30 seconds and then continues as normal.
The signal quality is very good, I've analyzed it both in Windows and in Dreambox (on the same cable).
The freezing problem does not happen with FTA channels so I would guess that the DVB-C card itself works fine.
I've tested the CAM and the subscription card in my TV which has CI and it works fine - so the CAM is fine too...
Interesting (and very frustrating) fact is that the only way I managed to get stable performance was when I out of desperation tested that not-to-be-discussed filter with my subscription card in the Dreambox... And it worked perfectly... Now, I'm not too keen on using the non-supported functionality (even though I would only be watching my paid-for channels - I have no external connection from Dreambox), but this was a very interesting test that yet again confirmed that most of the parts are fine - but in combination they don't seem to be working...
So, let me ask again...
Is there any way to "tweak" DVB-C performance, especially in regards to CAM and pay channels?
Is there any card and CAM combination that actually works rock-solid for DVB-C and particularly comhem (Sweden)?
Is there anybody out there using TerraTec Cinergy C PCI HD and Dilog Conax 5.0 CAM? Does it work? Or is this combination (maybe also in combination with my other hardware) doomed from the start?
Please help a lost soul!
Thanks
Since then I spent numerous hours trying to get anything even remotely close to decent performance - without success. I've tried any possible combination of Windows XP, Windows 7, MP 1.0.2, MP 1.1.0 , SVN:s and even MP 0.2.3... The problem is always the same - non-FTA channels freeze after few minutes and log files show nothing unusual.
Now, I know that this is most likely not really MP problem (see below) but I'm really curious - and helpless right now. Is there any way to "tweak" DVB-C performance, especially in regards to CAM and pay channels? Is there any card and CAM combination that actually works rock-solid for DVB-C and particularly comhem (Sweden)?
What else have I tried... Well, to start with I've tried different media applications on Windows and freezing problem is always there. The "best" result is obtained with Terratec's own Home Cinema application which at least "unfreezes" the picture after 20-30 seconds and then continues as normal.
The signal quality is very good, I've analyzed it both in Windows and in Dreambox (on the same cable).
The freezing problem does not happen with FTA channels so I would guess that the DVB-C card itself works fine.
I've tested the CAM and the subscription card in my TV which has CI and it works fine - so the CAM is fine too...
Interesting (and very frustrating) fact is that the only way I managed to get stable performance was when I out of desperation tested that not-to-be-discussed filter with my subscription card in the Dreambox... And it worked perfectly... Now, I'm not too keen on using the non-supported functionality (even though I would only be watching my paid-for channels - I have no external connection from Dreambox), but this was a very interesting test that yet again confirmed that most of the parts are fine - but in combination they don't seem to be working...
So, let me ask again...
Is there any way to "tweak" DVB-C performance, especially in regards to CAM and pay channels?
Is there any card and CAM combination that actually works rock-solid for DVB-C and particularly comhem (Sweden)?
Is there anybody out there using TerraTec Cinergy C PCI HD and Dilog Conax 5.0 CAM? Does it work? Or is this combination (maybe also in combination with my other hardware) doomed from the start?
Please help a lost soul!
Thanks