- August 30, 2011
- 644
- 79
- Home Country
- United Kingdom
MediaPortal Version: 1.2.1
MediaPortal Skin: StreamedMP
Windows Version: Windows 7 x64 SP1
CPU Type: Intel Celeron G530 (2.4 GHz)
HDD: Intel 320 Series SSD (40 GB)
Memory: Kingston 1066 MHz (4 GiB)
Motherboard: MSI H67MA-E35 (B3)
Video Card: nVidia GT 430 (fanless)
Video Card Driver: Latest
Sound Card: On-board GPU
Sound Card AC3: None
Sound Card Driver: Latest
1. TV Card: BlackGold BGT-3630
1. TV Card Type: DVB-T2 & DVB-S2
1. TV Card Driver: 8.1.1.2
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: LAV Video Decoder (CUVID)
MPEG2 Audio Codec: ffdshow tryouts
h.264 Video Codec: LAV Video Decoder (CUVID)
Satelite/CableTV Provider: Freesat (28.2° & 28.5° East)
HTPC Case: SilverStone Grandia GD04B
Cooling:
Power Supply: Antec EarthWatts EA 380D
Remote: Hama MCE Remote
TV: Bush HDTV
TV - HTPC Connection: HDMI
I have my DVB-S2 card as highest priority so haven't had to use Freeview HD (DVB-T2) a lot. However, I had to use it recently and I had problems with the sound. Firstly, on BBC One HD there was no sound. Then I switched to BBC HD and there was no sound. Then I switched back to BBC One HD and there was sound, so I continued watching the programme. However, my recording of that program has no sound after it switches from the "local news can't be shown on BBC One HD" ident to the weather report at the end of the news. I've extracted the LATM AAC file and it is just silence after the first 35 seconds (when the ident disappears).
My Configuration -> TV -> TV Client -> Audio Settings page is set as follows:
Preferred Languages: English (eng)
Prefer AC3 Sound: Yes (required to stop transcription audio being used by default on HD DVB-S2 channels)
Prefer Audiotype Over Language: No
Enable AudioDualMono Mode Switching: No
My Configuration -> Codecs and Renderer -> TV Codecs page is set as follows:
MPEG-2 Video Decoder: LAV Video Decoder (CUVID)
H.264 Video Decoder: LAV Video Decoder (CUVID)
MPEG / AC3 Audio Decoder: ffdshow Audio Decoder
LATM AAC Audio Decoder: LAV Audio Decoder
DD+ Audio Decoder: ffdshow Audio Decoder
Audio Renderer: Default DirectSound Device
MediaPortal Skin: StreamedMP
Windows Version: Windows 7 x64 SP1
CPU Type: Intel Celeron G530 (2.4 GHz)
HDD: Intel 320 Series SSD (40 GB)
Memory: Kingston 1066 MHz (4 GiB)
Motherboard: MSI H67MA-E35 (B3)
Video Card: nVidia GT 430 (fanless)
Video Card Driver: Latest
Sound Card: On-board GPU
Sound Card AC3: None
Sound Card Driver: Latest
1. TV Card: BlackGold BGT-3630
1. TV Card Type: DVB-T2 & DVB-S2
1. TV Card Driver: 8.1.1.2
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: LAV Video Decoder (CUVID)
MPEG2 Audio Codec: ffdshow tryouts
h.264 Video Codec: LAV Video Decoder (CUVID)
Satelite/CableTV Provider: Freesat (28.2° & 28.5° East)
HTPC Case: SilverStone Grandia GD04B
Cooling:
Power Supply: Antec EarthWatts EA 380D
Remote: Hama MCE Remote
TV: Bush HDTV
TV - HTPC Connection: HDMI
I have my DVB-S2 card as highest priority so haven't had to use Freeview HD (DVB-T2) a lot. However, I had to use it recently and I had problems with the sound. Firstly, on BBC One HD there was no sound. Then I switched to BBC HD and there was no sound. Then I switched back to BBC One HD and there was sound, so I continued watching the programme. However, my recording of that program has no sound after it switches from the "local news can't be shown on BBC One HD" ident to the weather report at the end of the news. I've extracted the LATM AAC file and it is just silence after the first 35 seconds (when the ident disappears).
My Configuration -> TV -> TV Client -> Audio Settings page is set as follows:
Preferred Languages: English (eng)
Prefer AC3 Sound: Yes (required to stop transcription audio being used by default on HD DVB-S2 channels)
Prefer Audiotype Over Language: No
Enable AudioDualMono Mode Switching: No
My Configuration -> Codecs and Renderer -> TV Codecs page is set as follows:
MPEG-2 Video Decoder: LAV Video Decoder (CUVID)
H.264 Video Decoder: LAV Video Decoder (CUVID)
MPEG / AC3 Audio Decoder: ffdshow Audio Decoder
LATM AAC Audio Decoder: LAV Audio Decoder
DD+ Audio Decoder: ffdshow Audio Decoder
Audio Renderer: Default DirectSound Device