LNB 2 no signal - KNC DVB-S2 (2 Viewers)

[chfux]

TV-Server Version: Setup 1.0 RC4
MediaPortal Version: Setup 1.0 RC4
MediaPortal Skin: Blue
Windows Version: XP SP 3
CPU Type: E6600
HDD: 2*512GB Seagate
Memory: 2048 MB
Motherboard: ASUS P5W Deluxe
Video Card: ATI 3650
Video Card Driver: Catalyst 8.3
Sound Card: XFI Music
Sound Card AC3:
Sound Card Driver:
1. TV Card: KNC DVB-S 2
1. TV Card Type: S2
1. TV Card Driver: 1.9.0812.2 (BDA)
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: Cyberlink 7.3
MPEG2 Audio Codec: Cyberlink 7.3
h.264 Video Codec: Cyberlink 7.3
Satelite/CableTV Provider: Astra Sat
HTPC Case: TNN 500 AF
Cooling: passive
Power Supply:
Remote: Zalman
TV: Pioneer Plasma
TV - HTPC Connection: DVI

I am not able to find any channel on LNB 2. LNB 1 ist ok with Hotbird, LNB 2 is connected to Astra, but there I cannot find any channel.

I did ry the different settings for Diseqc, but I could not get any channels. With Globe-TV I must set "Option A- Position B" to get a valid signal from LNB 2. I belive the correct setting for TV-Server would be "Level1AB".

Seems that the diseqc is not supported for my KNC DVB-S2.

Any ideas?

 

[dman_lfc]

DiSEqC doesn't seem like it was implemented properly so I have updated the code.
You'll need SVN 21310 or later of TVServer to try it out.

I have no KNC card here so I cannot test it for you...

DMAN

 

[chfux]

I will try that if a build is available.

 

[morpheus_xx]

Maye you want to try the modified files, posted by misterd here:
https://forum.team-mediaportal.com/...-not-recognized-20063/index13.html#post357006

Would be interesting for me too, if they work...

 

[chfux]

hm, if I just copy these files the configurator is no longer running. Seems that the files needs to be registered in system. I will wait until the next build with installer is available.

 

[morpheus_xx]

there's a new svn build available.

maybe you like to check this one, as there were some changes to KNC handling

 

[chfux]

I am sorry - I just tried the snapshot build from 23.01.09. The diseqc settings are not passed to my KNC DVB-S2 adapter. No matter which setting I put, I always get the LNB1 selected.

I did use a clean installation based on Version 1.0, then I did install the snapshot from 23.01.09 and the patched tswriter.ax file.

 

[morpheus_xx]

can you post tv.log and tswriter.log?

 

[chfux]

here is the log.

You should see tries with different diseqc settings. On LNB1 should respond Hotbird, on LNB2 Astra.

Hope this helps.