Reply to thread

Message

<blockquote data-quote="CommGuru" data-source="post: 190956" data-attributes="member: 26278">debennett2, You need to convert your ini files to work with the dishpro.&nbsp; To do that, just subtract 25600 from all of the H frequencies to turn them into V.&nbsp; For example, TP2 on Echostar7 is 12239 H.&nbsp; ABS (12239-25600) = 13661 V.&nbsp; Do that for all the H frequencies and you should be ok.&nbsp; Also, you need to override LOF settings and use LOF1: 11250, LOF2: 14350 LOFSW: 0.These two steps generally will work great although it never was perfect.&nbsp; I finally gave up on getting good DishPro issues resolved and trashed the LNB and picked up 2 x single legacy lnb's.Good luck,CGEdit:&nbsp; P.S.&nbsp; Remember that you will not get signal on all the TP's and thats normal due to spot beams, 8PSK TP's etc.&nbsp; Use Lyngsat to verify which TP's you should be getting signal on.&nbsp; Sorry if you know all of this already but hopefully it will help someone.</blockquote>

[QUOTE="CommGuru, post: 190956, member: 26278"] debennett2, You need to convert your ini files to work with the dishpro. To do that, just subtract 25600 from all of the H frequencies to turn them into V. For example, TP2 on Echostar7 is 12239 H. ABS (12239-25600) = 13661 V. Do that for all the H frequencies and you should be ok. Also, you need to override LOF settings and use LOF1: 11250, LOF2: 14350 LOFSW: 0. These two steps generally will work great although it never was perfect. I finally gave up on getting good DishPro issues resolved and trashed the LNB and picked up 2 x single legacy lnb's. Good luck, CG Edit: P.S. Remember that you will not get signal on all the TP's and thats normal due to spot beams, 8PSK TP's etc. Use Lyngsat to verify which TP's you should be getting signal on. Sorry if you know all of this already but hopefully it will help someone. [/QUOTE]

Verification