[WiP] madVR support in MP1 (14 Viewers)

[rohnfe]

bd3d iso was working great again too (lav 68-1-45/madvr 91.4)

So playing 3D from iso is working for you again ? weird...

Just recognized for everyone who is interested a new LAV Filter version was released:

LAV Filters 0.69 (released 2016/12/11)

LAV Splitter
- NEW: Support for extracting HDR metadata from YouTube HDR VP9 streams
- Fixed: Reading MKV files could crash when encountering tags for unknown or disabled streams

LAV Video
- NEW: Support for 10-bit UtVideo
- NEW: MagicYUV decoding support
- NEW: Experimental support for CineformHD decoding
- Fixed: Converting 12-bit 4:4:4 YCbCr to RGB32 would result in a garbled image
- Fixed: Decoding certain H.264 streams could drop a few frames at the start of playback

LAV Audio
- NEW: DTS Express (LBR) decoding support

 

[biship]

MadVR uses LAVF (via windows inheritance) and ignores what is set in mediaportal config?

 

[daWooky]

oh, it depends

enable any audio codec you want to bitstream here. If bitstreaming DTS-HD MA, do not enable ‘Use DTS-HD Framing for all DTS types’ unless your receiver needs it.

@biship what do you set were?

weird...

yep
did u try it with mphc or potplayer? (btw. the nasty potplayer seems able to scale 4k3d, damn weird......but nice ^^)

 

[rohnfe]

Really ? Never tried potplayer but i thought 4k3D would not be possible due to HDMI bandwidth constraints..when not upscaled via a 4K TV

 

[daWooky]

yep i thought the same, hdmi specs...
i used pp to upscale 3d with a fixed custom resolution set 3840x2.. works only with sbs not framepacked ^^
if you ask me there is no big problem with the bandwidth, but the tv doesnt know the format so no wonder it refused to switch to 3d mode, sadly

 

[rohnfe]

Ah ok .. so SBS is working ...basically SBS is just a 2D picture and the TV overlaps those 2 sided pictures to get 3D.
I thought you got it working with framepacked 3D

Btw. does someone else have random flickering of the UI when a video/movie is paused?
I think i only saw it with 24p movies not sure though..its not constantly but reoccurs quite often.

 

[joecrow]

Hi
The attached log covers a problem on resume from sleep this morning at arround 10:00 today. HTPC woke up and seemed quite busy, but TV and AVR did not, after turning on the TV/AVR manually the TV reported no signal. Had to hit the power button and rebooted then all seems OK. Not sure it it was anything to do with MP but please would you take a look for me.
v268 I noticed on starting a video (not TV) it initially shows a slightly smaller than fuIllscreen display with a white border and in the top left of the border it says Madvr, after a couple of seconds it goes to fullscreen. Is this intentional?
Other than that and after several days testing, v268 looks really good, eveything works for me and zapping is very good. Good work.

 

[rohnfe]

Hi

v268 I noticed on starting a video (not TV) it initially shows a slightly smaller than fuIllscreen display with a white border and in the top left of the border it says Madvr, after a couple of seconds it goes to fullscreen. Is this intentional?

This might be going into the same direction as my 3D issue ... i dont know ..
madvr shows "windowed" for a short moment but this might "break" the picture for 3D.

 

[joecrow]

This might be going into the same direction as my 3D issue ... i dont know ..
madvr shows "windowed" for a short moment but this might "break" the picture for 3D.

The "windowed" or "exclusive" message is, I think, a feature of checking the Fullscreen exclusive mode in the Madvr rendering settings and should go away if you uncheck it. What I reported is in addition to that and happens regardless of the Fullscreen exclusive mode setting. Neither phenominum gives me any problem with 3D which plays on regardless, although after a couple of cutouts on initial start but I don't have 4k capability just 1080.

 

[Sebastiii]

Hi guys

Little busy atm and surely this weekend but i will analyse logs and see whatis happening.
I have try the last weekend to work around 3D (SBS) with auto3d plugins and i was able to display only OSD on one eye (it's not great but better than before) madVR OSD is not ok, not sure if i can do something more but still i will retry

About the little windowed, it's maybe a regression introduced need to have a look but i don't to break the reduce video window too so maybe it will stay like this.

For @rohnfe when i have look your log, it's possible that deinit window (it can be fullscreen / going home etc.) trigger the issue like it was happening for @joecrow on ZAP.

@joecrow about the resuming it can be MP or not lol. (will analyse log)