[WiP] madVR support in MP1 (20 Viewers)

[bilis4]

@bilis4 please make a new log and please always use the same settings... because its damn hard to follow you if ya once say ya use dxva native but did a screen on c-b.... btw. have ya thought about going back to win 1703^^

Will make new logs later. Htpc is now in use. BTW i didn't recall saying that i am on DXVA native(Although i have trying everything). i will plan to change graphics drivers and finally i will revert to 1703

 

[joecrow]

Have you checked dir rights? madVR wont error if it can't write, will just use reg settings.

@kenwonders Yep that was it, moved Madvr to a non-system area (was in c:\Program Files) and sure enough the settings.bin appears after Madvr config. changes were made.

 

[bilis4]

Have you checked dir rights? madVR wont error if it can't write, will just use reg settings.

i also moved Madvr Dir and settings.bin appeared.

 

[Sebastiii]

@Sebastiii
your build
http://tinyurl.com/y987xqmv

Thanks
@daWooky this build has the screenshot call async, not sure if it will fix the crash but worth a try

 

[daWooky]

the crash

it just seems to happen on the insider....and im curious if there will be another new flight today.

no error on screens seen on my normal htpcs... so see some screenshots with different settings and htpcs:

even on fcu async series shots with ngu sharp and added gain worked good

 

[daWooky]

after toying a bit around with it... it seems that it can fail if auto3d enabled. if i take a shot before the analyse grab frame it will fail.

Spoiler

[2017-12-08 16:12:00,551] [Log ] [36 ] [DEBUG] - GUIVideoOverlay : SetCurrentFile DoesPostRender _fileName [F3. FHD] Spider-Man 3 (2007)
[2017-12-08 16:12:00,561] [Log ] [36 ] [DEBUG] - VMR9: send resize OSD/Screen message for madVR
[2017-12-08 16:12:00,563] [Log ] [MPMain ] [DEBUG] - g_player VideoWindowChanged() ForceMadVRFirstStart madVR
[2017-12-08 16:12:00,565] [Log ] [MPMain ] [DEBUG] - VMR9 : madVR reposition window
[2017-12-08 16:12:03,962] [Log ] [Auto3D analyze thread] [INFO ] - Auto3D: Start Video Analysis
[2017-12-08 16:12:04,280] [Log ] [Auto3D analyze thread] [DEBUG] - Similarity: 0,236041666666667 - Fmt2D
[2017-12-08 16:12:04,576] [Log ] [Auto3D analyze thread] [DEBUG] - Similarity: 0,348125 - Fmt2D
[2017-12-08 16:12:04,878] [Log ] [Auto3D analyze thread] [DEBUG] - Similarity: 0,335520833333333 - Fmt2D
[2017-12-08 16:12:05,175] [Log ] [MPMain ] [DEBUG] - VMR9: Delayed OSD Callback
[2017-12-08 16:12:05,175] [Log ] [Auto3D analyze thread] [DEBUG] - Similarity: 0,2303125 - Fmt2D
[2017-12-08 16:12:05,471] [Log ] [Auto3D analyze thread] [DEBUG] - Similarity: 0,3228125 - Fmt2D
[2017-12-08 16:12:05,472] [Log ] [Auto3D analyze thread] [DEBUG] - Results(4) - Normal=5 - SBS3D=0 - TB3D=0
[2017-12-08 16:12:05,767] [Log ] [Auto3D analyze thread] [DEBUG] - Similarity: 0,412604166666667 - Fmt2D
[2017-12-08 16:12:05,767] [Log ] [Auto3D analyze thread] [DEBUG] - Results(5) - Normal=6 - SBS3D=0 - TB3D=0
[2017-12-08 16:12:05,768] [Log ] [Auto3D analyze thread] [INFO ] - Auto3D: Format is 2D. No switch necessary
[2017-12-08 16:12:14,044] [Log ] [MPMain ] [INFO ] - Main: Taking screenshot - Target: C:\Users\da\Pictures\MediaPortal Screenshots\2017-12-08\16-12-14.png
[2017-12-08 16:12:18,958] [Log ] [Auto3D analyze thread] [INFO ] - Auto3D: Start Video Analysis
[2017-12-08 16:12:19,051] [Log ] [MPMain ] [DEBUG] - VMR9 : madVR grabbing image window
[2017-12-08 16:12:19,067] [Log ] [MPMain ] [INFO ] - VMR9 : madVR grabbing image window failed
[2017-12-08 16:12:24,160] [Log ] [Auto3D analyze thread] [DEBUG] - FrameGrabber: Frame not ready for madVR
[2017-12-08 16:12:29,366] [Log ] [Auto3D analyze thread] [DEBUG] - FrameGrabber: Frame not ready for madVR
[2017-12-08 16:12:37,580] [Log ] [Auto3D analyze thread] [DEBUG] - FrameGrabber: Frame not ready for madVR

...if i waited a bit ..auto3d double detect over (working like a charm btw.)..its ok and 800% ngu shot working too

 

[Sebastiii]

@daWooky thanks
Will try to screenshot a frame before auto3d start

 

[Sebastiii]

after toying a bit around with it... it seems that it can fail if auto3d enabled. if i take a shot before the analyse grab frame it will fail.

Spoiler

[2017-12-08 16:12:00,551] [Log ] [36 ] [DEBUG] - GUIVideoOverlay : SetCurrentFile DoesPostRender _fileName [F3. FHD] Spider-Man 3 (2007)
[2017-12-08 16:12:00,561] [Log ] [36 ] [DEBUG] - VMR9: send resize OSD/Screen message for madVR
[2017-12-08 16:12:00,563] [Log ] [MPMain ] [DEBUG] - g_player VideoWindowChanged() ForceMadVRFirstStart madVR
[2017-12-08 16:12:00,565] [Log ] [MPMain ] [DEBUG] - VMR9 : madVR reposition window
[2017-12-08 16:12:03,962] [Log ] [Auto3D analyze thread] [INFO ] - Auto3D: Start Video Analysis
[2017-12-08 16:12:04,280] [Log ] [Auto3D analyze thread] [DEBUG] - Similarity: 0,236041666666667 - Fmt2D
[2017-12-08 16:12:04,576] [Log ] [Auto3D analyze thread] [DEBUG] - Similarity: 0,348125 - Fmt2D
[2017-12-08 16:12:04,878] [Log ] [Auto3D analyze thread] [DEBUG] - Similarity: 0,335520833333333 - Fmt2D
[2017-12-08 16:12:05,175] [Log ] [MPMain ] [DEBUG] - VMR9: Delayed OSD Callback
[2017-12-08 16:12:05,175] [Log ] [Auto3D analyze thread] [DEBUG] - Similarity: 0,2303125 - Fmt2D
[2017-12-08 16:12:05,471] [Log ] [Auto3D analyze thread] [DEBUG] - Similarity: 0,3228125 - Fmt2D
[2017-12-08 16:12:05,472] [Log ] [Auto3D analyze thread] [DEBUG] - Results(4) - Normal=5 - SBS3D=0 - TB3D=0
[2017-12-08 16:12:05,767] [Log ] [Auto3D analyze thread] [DEBUG] - Similarity: 0,412604166666667 - Fmt2D
[2017-12-08 16:12:05,767] [Log ] [Auto3D analyze thread] [DEBUG] - Results(5) - Normal=6 - SBS3D=0 - TB3D=0
[2017-12-08 16:12:05,768] [Log ] [Auto3D analyze thread] [INFO ] - Auto3D: Format is 2D. No switch necessary
[2017-12-08 16:12:14,044] [Log ] [MPMain ] [INFO ] - Main: Taking screenshot - Target: C:\Users\da\Pictures\MediaPortal Screenshots\2017-12-08\16-12-14.png
[2017-12-08 16:12:18,958] [Log ] [Auto3D analyze thread] [INFO ] - Auto3D: Start Video Analysis
[2017-12-08 16:12:19,051] [Log ] [MPMain ] [DEBUG] - VMR9 : madVR grabbing image window
[2017-12-08 16:12:19,067] [Log ] [MPMain ] [INFO ] - VMR9 : madVR grabbing image window failed
[2017-12-08 16:12:24,160] [Log ] [Auto3D analyze thread] [DEBUG] - FrameGrabber: Frame not ready for madVR
[2017-12-08 16:12:29,366] [Log ] [Auto3D analyze thread] [DEBUG] - FrameGrabber: Frame not ready for madVR
[2017-12-08 16:12:37,580] [Log ] [Auto3D analyze thread] [DEBUG] - FrameGrabber: Frame not ready for madVR

...if i waited a bit ..auto3d double detect over (working like a charm btw.)..its ok and 800% ngu shot working too

It seems to not be the latest madVR build because screenshot is done on C++ side in latest but above log is on C#
Can you confirm ? (if you have installed the latest version then need to make a new build or attach one in first post )

 

[Sebastiii]

First post updated with v404 installer and also a little change in Auto3D (i didn't remember what is the change but the change was from last week lol)

 

[daWooky]

It seems to not be the latest madVR build

Build: 1.15.0-1195-g893b186-