[WiP] madVR support in MP1 (41 Viewers)

[alexdepalma]

Hi!
@Sebastiii

I have a blinking image problem when video on Mainscreen or TV Guide. Happends after several zaps and TV guide and Home swaps.
Black bar crop doesent work neither side several weeks.

Problem happend at 11:46.

I'm on V275

Video ziped also attached

 

[biship]

I've tried 3 browsers and the downloads on the 1st post will not download.
They only download 96k-200k of the file (really slowly), and abort within the first 10s.
They use to work fine, when I last downloaded one of the previous releases last year.

 

[kenwonders]

thank you for the answer but i've changed tv and not the specification in my profile but the question is why if i use the test files i got color ok if the source is 10bit, but when the source is 8 bit file the color are oversaturated ?

It might be converting your 8bit to 10bit using gamma 2.2 (check your devices/'colour and gamma' or devices/calibration and try changing to 2.4)

 

[joecrow]

I've tried 3 browsers and the downloads on the 1st post will not download.
They only download 96k-200k of the file (really slowly), and abort within the first 10s.
They use to work fine, when I last downloaded one of the previous releases last year.

I just dowloaded v276 from page 1 took less than 2 mins and installed AOK. Problem at your end I think.

 

[joecrow]

v275 all working good for me. Just a non functional issue, it seems that zapping has become very clunky again, it is OK from HD to HD channels but from HD to SD and SD to SD the channel change is as follows. The new channel OSD is displayed at bottom of screen then the old channel freezes (video and audio) but now with old channel OSD displayed, the video restarts without audio, with no OSD then freezes again, new channel info OSD is shown then sometimes but not always black screen still with new channel OSD or TV GUI then new channel frozen video, then finally new channel video and audio.
I will try v276 tomorrow and see if there is any improvement.

 

[Sebastiii]

Will do debugging too over the week-end

 

[Sebastiii]

Will link to V277 (had made only one change maybe for @GeYe issue)

 

[mrmojo666]

It might be converting your 8bit to 10bit using gamma 2.2 (check your devices/'colour and gamma' or devices/calibration and try changing to 2.4)

thank you for the suggestion, but it seems is ignoring those setting when output is 10 bit, they are applyed only when madvr switchs to windowed 8 bit mode. yesterday i saw there is a amd driver update and also i saw i'm on madvr913 but there is a new 915, so i hope making those upgrades change something. during weekend i'll try.

 

[GeYe]

Will link to V277 (had made only one change maybe for @GeYe issue)

Will hopefully get time to test on weekend.

Just some hints: The only thing i had changed between the version is, that for your test i deactivated the madvr resolution changer.

The second thing is: Before i get the mediaportal crash and after wakeup from standby mediaportal seems to change the gui resolution quite often, it starts to flicker and symptoms like you it do with an alt + enter, This lasts I think 5 seconds till the driver and mp crashes. So now i know why i had the option ticked on .

 

[GeYe]

Will link to V277 (had made only one change maybe for @GeYe issue)

Same crash as with v276, will test more with more time