I am not trying to hibernate via the PowerScheduler plugin, but actively via the icon in the upper left next to the close mediaportal button.
Or is this the same?
Or is this the same?
If you are on a singel seat setup (MP and TVServer on the same machine) you must enable the PowerScheduler plugin in the TVServer configuration *AND* the PowerScheduler plugin in the MP configuration. Beware that within MP config there are two PowerScheduler plugins. There you have to choose the one under Process Plugins. You should also set both plugins (TVServer and MP) to similar values.
HTH
grubi.
If you are on a singel seat setup (MP and TVServer on the same machine) you must enable the PowerScheduler plugin in the TVServer configuration *AND* the PowerScheduler plugin in the MP configuration. Beware that within MP config there are two PowerScheduler plugins. There you have to choose the one under Process Plugins. You should also set both plugins (TVServer and MP) to similar values.
HTH
grubi.
Thanks for your swift reply. I was aware of the MP Client PowerScheduler plugin and had enabled it. However, are you saying that for the TVServer PowerScheduler plugin to work, that the MP Client must always be running on the single seat (& with it's client PowerScheduler plugin enabled)? Does this also include minimized to the taskbar tray. So, if I do not have the MP Client running (with the client PowerScheduler plugin enabled) then the TVServer will not carry out any hibernation etc?
I was expecting the TVserver to be able to handle hibernation independently of the MP Client.
(Edit: apologies for posting here if it is not appropriate - I am using this SVN at the moment, so thought it apt to post here.)
Thanks for your swift reply. I was aware of the MP Client PowerScheduler plugin and had enabled it. However, are you saying that for the TVServer PowerScheduler plugin to work, that the MP Client must always be running on the single seat (& with it's client PowerScheduler plugin enabled)? Does this also include minimized to the taskbar tray. So, if I do not have the MP Client running (with the client PowerScheduler plugin enabled) then the TVServer will not carry out any hibernation etc?
I was expecting the TVserver to be able to handle hibernation independently of the MP Client.
(Edit: apologies for posting here if it is not appropriate - I am using this SVN at the moment, so thought it apt to post here.)
TVService always refuses the first try to get hibernation. I can read this in the eventviewer. I always need at least 2 attempts. Although the tvservice is in idle!
Does anyone els have this as well?
TV-Server Version: RC1
MediaPortal Version: RC1
MediaPortal Skin: Blue Wide
Windows Version: Vista Home Premium
CPU Type: Intel CoreDuo 6850 3.0Ghz
HDD: Western Digital 500 gig
Memory: 2 Gig KVR667D2N5K2
Motherboard: ASRock Conroe 1333-DVI/H R2.0/M/ASR
Video Card: ASUS EAH3870X2 1GB
Video Card Driver: Latest
Sound Card: Realtek on board
Sound Card AC3:
Sound Card Driver: 6.0.1.5485
1. TV Card: Floppy DTV-S2
1. TV Card Type: DVB-S/S2
1. TV Card Driver: 4.5N
2. TV Card: Hauppauge HVR4000
2. TV Card Type: Hybrid only using DVB-T
2. TV Card Driver: Latest
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
[
After restart getting not responding in full scren, I don't know if I broke something when I started using the function (hadn't tried it previously), I did go into Vista settings after SVN install, two sets of logs att. they wn't mean anyting to me!
Also started using HDMI sound output so only stereo,instead of 5.1 ouput, still need to use FFDShow audio decoder to view Discovery Turbo, can now view BBC channels with MPV decoder, during playback the mouse cursor is now hidden, whe using Cyberlink it was visible.
By far the best build to date, looks like were all getting braver, seeing what else we can break!
Brilliant guys, thanks.
Thank you both for your replies!On the client (single-seat btw) I can watch TV and change channels just fine (even if the changes takes quite some time), but I get no EPG, no channel listing (!!!), no info for current watched show etc.
Any ideas what to look for? Since I've seen no-one else mentioning the same thing I guess it's probably something on my end of things, but it was like this from clean install (now I've of course tried to find the error and installed a few plugins, so it's not entirely clean any more).
Go into TV-Server Configuration --> Manual Control and there press the button "Refresh EPG".
If that doens't work, try shutting down the SQL Server and restart it, then again "Refresh EPG" in TV-Server configuration.
After you hit "Refresh EPG", hit the View Logs button. Once EPG grabbing is running, an "epg.log" file will be created. A) check that for errors b) post it up here for the devs to look at. Hope that helps!
I see no errors in the TV server logs, and am starting to suspect it's a client issue. Is there any way to check if the EPG is there without using MP (TV Client that is)? Should it be stored in the MySQL database somewhere?
I do however found it odd that I don't even get a channel listing within MP. The logs clearly states that it finds 17 channels, yet there are none in the channel list. I will continue to debug this some more, but if I don't find anything, I'll post the logs for everyones viewing pleasure and hope for the best
Unfortunately no progress so far. Anyone else ever seen that they don't even get a channel listing within MP? Anyway, I tried completely installing RC1 and setting that up, and then this SVN and setting that up, but both acted the same way. I'll try to make a as proper report as possible later.